Ruko Outdoor Smart Plug SE User Guide
- June 3, 2024
- Ruko
Table of Contents
Ruko Outdoor Smart Plug SE
What’s included
- A Roku Outdoor Smart Plug SE
- B 24mm M3 screw
- C Bracket screw
- D Drywall anchor
- E Bracket
What you’ll need
- GFCI outlet
- Screwdriver (if mounting)
- Your smartphone
- Status light
- Power light
- Power buttons
- Power sockets
- Light sensor
- Weatherproof socket covers
Let’s get started
STEP 1: Download the Roku Smart Home app
Scan the QR below to download the Roku Smart Home app on your smartphone. Sign
in with your Roku account or create one.
STEP 2: Insert plug
Insert your outdoor smart plug into a power outlet. The status light will
begin flashing BLUE to show it’s in pairing mode. If it’s not flashing BLUE,
press and hold the Power button until it begins to flash.
STEP 3: Pair to app
In the Roku Smart Home app, tap the “+” button, then “Add Device” to find
“Outdoor Smart Plug.” Follow the instructions to finish setup.
What’s that light mean?
Status Light | State |
---|---|
BLUE – Slowly flashing | Connecting to Wi-Fi® |
BLUE – Quickly flashing | In pairing mode |
BLUE – Solid | Connected and working |
Power light | State |
--- | --- |
White – Solid | Socket power on |
NO LIGHT | Socket power off |
How it works
Turning the sockets on/off
Press the left or right power button to turn each socket on or off.
Resetting your plug Press and hold one of the power buttons for 3 seconds to
reset your smart plug.
Use the Roku Smart Home app to control your smart plug from anywhere.
WARNING
Mount vertically with the receptacles facing downward and at least 2 ft above
the ground. For outdoor usage, use this product with ground fault circuit
interrupter (GFCI) outlet.
FCC WARNING
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator & your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
Need help?
Visit go.roku.com/plugs
© 2022 Roku, Inc. All rights reserved. Roku, the Roku logo, Roku Smart Home, and the Roku Smart Home logo are the trademarks or registered trademarks of Roku, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>