Invertek Drives RJ45 USB Connection Cable Instruction Manual
- June 1, 2024
- Invertek Drives
Table of Contents
Invertek Drives RJ45 USB Connection Cable
Use
- A dedicated PC connection kit for all Optidrive models, allowing direct connection from the PC to the drive for use with Optitools Studio Software.
- The USB cable can be plugged into a suitable USB type A on the PC and then into the RJ45 communications port on the drive.
Compatibility
This option is compatible with the following products:
- CoolVert
- Compact
- P2
- Eco
- E3
- Elevator
- Model Code
- OPT-2-USB485-OBUS
Technical Data
- Temperature Range 0C – 40C
- Protection Class IP20
- Weight 62
- Isolation Class III
- Packaging W 127cm x D 86cm x H 45cm
- Isolated USB – RJ45 connection adaptor.
- USB2.0.
- Compatible with Windows XP, Visa, 7, 8, 8.1, 10 & 11.
- Supports Optitools Studio PC Software connection to the drive.
- 1.5-meter cable length.
- Driver’s included in OptiTools for Windows 10 & 11
Safety
- The RJ45 port on the drive is not an Ethernet Port.
- WARNING This is not an Ethernet connection. Do not connect directly to an Ethernet port.
- WARNING When using Modbus RTU or BACnet, ensure that the 0V signal (T3) is used to avoid comms errors and potentially damaging common mode voltages.
- Invertek Drives Ltd Offa’s Dyke Business Park Welshpool Powys, UK SY21 8JF
- www.invertekdrives.com
Documents / Resources
|
Invertek Drives RJ45 USB Connection
Cable
[pdf] Instruction Manual
RJ45 USB Connection Cable, USB Connection Cable, Connection Cable, Cable
---|---
Read User Manual Online (PDF format)
Loading......