GE APPLIANCES GE40S08DAT 40 Gallon Short 4500W Electric Water Heater Instruction Manual

Table of Contents

GE-APPLIANCES-GE40S08DAT-40-Gallon-Short-4500W-Electric-Water-Heater-
PRODUCT

Specifications

Model: GE40S08DAT
Dimensions: 22 inches (width) x 51-3/8 inches (height)
Installation: Follow local installation regulations and codes
Power Requirements: Check the rating plate for power supply compatibility
Clearances: Ensure adequate clearance for service access
Certifications: Listed by Underwriters Laboratories, Certified to NSF/ANSI 372

Installation Information

Install the water heater according to local codes and regulations. Refer to the installation instructions provided with the product for complete information.

Power Requirements

Verify that the power supply matches the requirements indicated on the water heater’s rating plate.

Location

Place the water heater in a clean, dry area close to the location with the highest demand for heated water to avoid energy and water wastage due to long uninsulated hot water lines.

Clearances

Ensure there is enough clearance around the water heater for servicing. The controls and drain at the front of the unit should have clear access.
For installations requiring minimal clearance on the sides or rear, provide additional clearance on the opposite side for service access.

Typical Top Connect Installation

FAQ:

Q: Where can I find the complete warranty details?

A: Refer to the written warranty provided with the product for full details on warranty coverage.

Q: How can I check if my model is certified for lead content?

A: Visit http://info.nsf.org/Certified/Lead_Content/ for specific model listings and certifications.

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

This water heater must be installed in accordance with these instructions, local codes, utility codes, utility company requirements, or, in the absence of local codes, the latest edition of the National Electrical Code.
It is available from some local libraries or can be purchased from the National Fire Preventions Association, Batterymarch Park, Quincy, MA 02169 as booklet ANSI/NFPA 70.
INSTALLATION INFORMATION: For complete information, see the installation instructions packed with your water heater.
POWER REQUIREMENTS: Check the markings on the rating plate of the water heater to be certain the power supply corresponds to the water heater requirements.
LOCATION: Locate the water heater in a clean dry area as near as practical to the area of the greatest heated water demand. Long uninsulated hot water lines can waste energy and water.
REQUIRED CLEARANCES: There must be sufficient clearance between any object and the top, rear, and sides of the water heater in the event service is needed.
The controls and drain at the front of the unit must have clear accessfor operation and service.
Installations that require minimal clearance on the sides or rear of the water heater for earthquake straps are also acceptable.
In these cases, additional clearance should be provided on the opposite side of the unit to allow for service access.

TYPICAL TOP CONNECT INSTALLATION

Real Capacity – Get the most hot showers from the only water heater that holds a true 40 gallons of water (Compared to 40-gallon electric steel tank water heaters per DOE-rated gallon capacity).
Maximum Performance – Live comfortably with this best-in-class unit that delivers 63 gallons of hot water in the first hour (Measured through DOE First Hour Rating).
Household Size – Provide hot water for the whole family of 2 to 4 persons. 4500W Heating Elements – Two 4500W heating elements require 25 Amp to operate and will increase water temperature for hot water when you need it Inlet Tube – Replenishes water from the bottom of the tank to maximize hot water delivery.
Easy Set Up – Replace your old water heater quickly and easily using standard water and electrical connections.
Anode Rod – Durable design offers long-lasting protection against corrosion.
Drain Valve – Rust-proof construction can be counted on to provide long-lasting service.
Adjustable Thermostat – Change the temperature to your desired setting. Warranty – 8-year Limited Parts Warranty*
Model GE40S08DAT – Diamond Gray
See written warranty for full details
For answers to your GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, at 800.626.2000.