SEALEY SSP44.V3 Adjustable Safety Spectacles Instruction Manual

SEALEY SSP44.V3 Adjustable Safety Spectacles

Product Information

Specifications:

• Model: SSP44.V3.
• Standard: BS EN 166/F.
• Lens: Wraparound, clear, anti-scratch polycarbonate.
• Adjustable length nylon arms for a snug fit.

Product Usage Instructions

Introduction
The Sealey Adjustable Arm Safety Spectacles are designed with a clear, anti-scratch polycarbonate lens and adjustable nylon arms for a secure fit. These safety spectacles meet the BS EN 166/F standard.

Safety
It is important to follow these safety precautions when using the Adjustable Arm Safety Spectacles:

• Ensure the safety glasses are impact-resistant but may break under severe impact.
• Avoid wearing eye protection over standard ophthalmic spectacles to prevent hazards.
• Be cautious of materials that may cause allergic reactions to sensitive individuals.
• Replace scratched or damaged oculars promptly.
• Avoid using tinted or clear lenses when exposed to harmful levels of radiation.

Applications
The Safety Spectacles protect against various hazards that may damage the user’s eyes or impair vision. They are designed to protect against impacts and optical radiation when worn snugly to the face.

Maintenance

• Cleaning
  When cleaning the Safety Spectacles:

  • Use a soft cloth and mild soap to clean the lens.
  • Ensure hands are clean and free of grease.
  • Avoid using abrasive materials.

• Storage
  Proper storage of the Safety Spectacles is essential:

  • Store in a bag or case away from direct sunlight and chemicals in a clean, dust-free environment.
  • Use the original bag for transportation.

• Obsolescence
  To ensure continued protection, follow these guidelines:

  • If the frame is damaged, replace the entire article.
  • Replace the product after a period of two years regardless of visible damage.

FAQ:

• Q: How often should I replace the Safety Spectacles?
  A: It is recommended to replace the Safety Spectacles after a period of two years, regardless of any visible damage.

• Q: Can I use tinted lenses for welding?
  A: It is advised not to use tinted or clear lenses when welding or performing operations exposing your eyes to harmful radiation. Choose appropriate eye protectors marked with ‘T’ for high-speed particles at extremes of temperature.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

INTRODUCTION

BS EN 166/F – Wraparound, clear, anti-scratch, polycarbonate lens. Adjustable length nylon arms for a snug fit.

• Notified Body: 0530
• Type Examination Certificate number: 18115
• Carried out by: Certottica Scrl

SAFETY

• WARNING! Safety glasses with polycarbonate lenses are impact resistant but may break under severe impact.
• WARNING! Eye protection worn over standard ophthalmic spectacles may transmit impact, thus creating a hazard to the wearer.
• WARNING! Materials which may come into contact with the wearer’s skin could cause allergic reactions to susceptible individuals.
• WARNING! Scratched or damaged oculars should be replaced.
• WARNING! Eye protectors against high speed particles worn over standard ophthalmic spectacles may transmit impacts, thus creating a hazard to the wearer.
• Always perform a risk assessment and follow correct health and safety procedures before using this product.
• DO NOT use tinted or clear lenses when welding or performing other operations which expose your eyes to harmful levels of radiation.
  IMPORTANT: if protection against high speed particles at extremes of temperature is required, then the selected eye-protector should be marked with the letter ‘T’ immediately after the impact letter, i.e. FT, BT or AT. If the impact letter is not followed by the letter ‘T’ then the eye protector shall only be used against high speed particles at room temperature.

APPLICATIONS

• SUITABILITY
  Protection against various hazards which are likely to damage the user’s eyes or impair vision. The function is to provide protection against impacts and optical radiation. When worn tightly to the face, these safety goggles provide excellent protection by preventing:

  • Impact hazards from chipping, grinding, machining, masonry work, riveting and sanding.
  • Chemical hazards against liquids, acid and chemical handling, degreasing, plating.
    NOTE: frequent cleaning due to lens fog may be required in certain conditions.

• EN 166 CATEGORISATION

  • Optical Class 1 – suitable for work with high vision requirements for permanent use.

• MECHANICAL STRENGTH

  • F – High speed particle at extremes of temperature – low energy impact.

• LENS MARKINGS

  • 2C-1.2 SGI F – Clear lens

MAINTENANCE

• CLEANING
  • Use a soft cloth and mild soap to clean. Ensure hands are clean (without grease).
  • DO NOT use abrasive materials.
• STORAGE
  • Store in a bag or case out of direct sunlight, away from chemicals and abrasive substances, in a clean dust-free environment.
  • Use original bag for transportation.
• OBSOLESCENCE
  Like all protective products, the life depends on the type of use, care and maintenance. If your frame is damaged, replace the entire article. In every case, the product must be replaced after a period of two years.

This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such w e reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on [email protected] or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: The guarantee is 12 months from the purchase date, proof of which is required for any claim.

EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
[email protected]
www.sealey.co.uk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>