Outsunny A20-125 4 Man Outdoor Steel Frame Camping Tent Instruction Manual
- June 13, 2024
- Outsunny
Table of Contents
Outsunny A20-125 4 Man Outdoor Steel Frame Camping Tent
Product Information
| Model Number | IN221000816V01_UK |
|---|---|
| Product Code | A20-125 |
| Duration | 60 minutes |
| Importer Address | MH STAR UK LTD Unit 27, Perivale Park, Horsenden lane South |
Perivale, UB6 7RH
Country of Origin| China
Product Usage Instructions
To ensure optimal usage and longevity of your appliance, please follow these instructions:
- Read the entire user’s manual carefully before using the product.
- If you have any questions or concerns, contact our customer care center through the following channels:
- Phone: 0044-800-240-4004 (UK)
- Email: enquiries@mhstar.co.uk
- Assemble the product according to the provided assembly instructions.
- Ensure that all parts are securely connected and tightened.
- Make sure the product is placed on a stable and level surface.
- Do not exceed the recommended duration of 60 minutes for product usage.
- Keep the product away from water and other liquids to prevent damage.
- When using electrical components, follow the specified voltage and power requirements.
- Regularly clean and maintain the product as per the user’s manual instructions.
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well,
please read all the instructions in this user’s manual. If you have any
questions, please contact our customer care center.
Our contact details are below
- Country UK
- Phone 0044-800-240-4004
- Email enquiries@mhstar.co.uk
Before you go on holiday with the new tent, please do a test set-up.
ASSEMBLY INSTRUCTIONS
- Please follow these instructions point by point in the gi- ven order.
- Poles and components: Remove all contents from tent bag.
- Extend all tent poles carefully. Do not let the shock cords snap the poles together.
- Unfold inner tent and rain fly and lay on ground.
RAIN FLY
- Each tent pole is colour coded to match corre-
- sponding tent pole sleeve to aid in assembling the tent
- Insert each pole into one sleeve of the fly from one end to the other
- At the end of each tent pole, insert the metal pins (found along the bottom edge of the rain fly) into both ends of each tent pole
- The rain fly is now standing up by itself, which can be secured by anchoring down with steel stakes at the PP webbings, located at the edges of the fly
- Tension of the fly can be adjusted by the guy ropes and buckles on the PP webbings joining both sides of the fly.
INNER TENTS
- Take the inner tents inside the assembled rain fly to its appropriate location
- Starting from the rear of the inner tent, stake down the corners along the bottom edge of the rain fly
- Hook the inner tent to the underside of the rain fly starting from the bottom rear and work your way forward to the top using the toggles on the outer wall of the inner tent and loops running along the underside of the rain fly Repeat the above steps for the rest of the inner tents
- you can leave some of the inner tents out to increase the living or storage capacity and to reduce the travel weight of the whole tent.
CARE
- When packing the tent make sure that it is completely dry, otherwise, there is a danger of mildew and rotting.
- Always pack poles and tent pegs separately from inner and outer tent.
- Prior to folding, clean the basement of the inner tent.
- Use a soft sponge and clear water only to clean the outer tent canvas. Don’t use any cleaning agent, for they may be harmful to the impregnation.
- Never pull tent pegs out by means of rings or tensioning ropes.
IMPORTER ADDRESS:
MH STAR UK LTD Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH
MADE IN CHINA
DIMENSION
PART LIST
INSTALLATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>