NEXTIVITY ROAM R41 Compact LITE Pack Trucker User Guide
- June 1, 2024
- NEXTIVITY
Table of Contents
NEXTIVITY ROAM R41 Compact LITE Pack Trucker
Specifications
- Model#:
- R41-YB
- R41-9B
- Bands Supported:
- 1, 3, 7
- 5, 8, 26, 28L
- 8, 20
- Output Power (dBm):
- Downlink Uplink: 0 24
- Downlink Uplink: 0 22
- Downlink Uplink: 0 24
- Downlink Uplink: 0 22
Install Donor Antenna
Mount the Donor Antenna on the exterior and towards the rear of your vehicle.
Ensure there is 50 cm of metal around the base of the antenna for optimal
performance.
Install the Server Antenna
Mount the Server Antenna in the cabin/deck towards the front of the vehicle.
Keep the Donor Antenna separated from the Server Antenna for best performance.
Select the Main Unit Location
Find a suitable location to securely mount the Main Unit with proper airflow.
Ensure all cables can reach their desired locations before mounting.
Attach Server and Donor Antennas
Attach the Donor and Server Antennas to the Main Unit, ensuring secure connections. Make sure to connect the ground cable as well.
Install Ground Cable
Attach one end of the ground cable to the Main Unit and the other end to the
chassis of the vehicle. Add a drip loop to the Donor Antenna cable to prevent
water damage.
ROAM R41 Quick Start Guide
KIT #
- R41-YB-003
- R41-YB-004
- R41-9B-001
- R41-9B-002
- R41-9B-003
- R41-9B-004
Included In the Box
Quick Installation
-
Install Donor Antenna
Mount your Donor Antenna on the exterior and towards the rear of your automobile or boat, depending on the design and type of vehicle. Make sure you consider the cable connection to the Main Unit with your location choice. Note: For best performance, ensure there is 50 cm of metal around the base of the antenna. -
Install the Server Antenna
Install the Server Antenna in the cabin/deck towards the front of the vehicle where coverage is needed. Make sure to mount the Server Antenna horizontally.
Note: The Donor Antenna should be separated/isolated as far away as possible from the Server Antenna, greater separation provides the best performance.
-
Select the Main Unit Location
Find a suitable location to securely mount the Main Unit. When installed, the Main Unit should have airflow. Make sure the location provides enough distance for all the cables to connect. It’s best to ensure all cables reach desired locations BEFORE mounting the device.
Note: DO NOT Plug in and power the Main Unit before connecting antennas.
Note: To avoid components moving or shifting in transit, it is critical to securely install the Main Unit, Donor Antenna, and Server Antenna. -
Attach Server and Donor Antennas
Attach the Donor Antenna and Server Antenna to the Main Unit. Note: Adding a drip loop to the Donor Antenna cable is crucial as it prevents water from flowing down the cable and damaging the Main Unit’s electronic equipment.
-
Install Ground Cable
Using the provided M3 screw, attach one end of the ground cable to the Main Unit and the other end to the chassis of the automobile or boat. -
Plug in the Main Unit
Plug the Main Unit into automotive auxiliary power with the included Automotive Auxiliary Power Adapter. The LED on the front will blink during setup and turn solid green when the device is ready. After powering on the device, route the DC cable using the routing cable clamp.
Note: This device can ONLY be connected with 12V auxiliary power outlet. -
Nextivity WAVE Software
Scan the QR code to Download the WAVE App to monitor and manage the status of your ROAM R41.
Scan the QR code to Download the MyWave App to set your ROAM R41 to automatically track the base station to which your phone is connected.
Marine Installation
- Donor Antenna
- Main Unit
- Power Cable
- Antenna Cable
- Server Antenna
- Grounding Cable
- Drip Loop
| | |
---|---|---|---
Model#| Bands Supported| Link| Output Power (dBm)
R41-YB
| 1, 3, 7| Downlink| 0
Uplink| 24
5, 8, 26, 28L| Downlink| 0
Uplink| 22
R41-9B
| 1, 3, 7| Downlink| 0
Uplink| 24
8, 20| Downlink| 0
Uplink| 22
Power/Status LED Indicator
LED Behavior| Error Translation
No light| Device is powered OFF
Solid Orange| Device is powered ON
–| Device is booting up
Slow blinking green| Device is band scanning to acquire network signals
Solid Green| Device is operating normally and providing coverage
Solid Red| Hardware Error (Error 6)–Disconnect & Reconnect
Flash RED 1 time & OFF for 4sec| Device is not receiving signal from the
cellular network (Error 1)
Flash RED 2 times & OFF for 4sec| Donor input signal is too strong for the
device (Error 8)
Flash RED 3 times & OFF for 4sec| Device’s server antenna is too close to
donor antenna (Too Close)
Flash RED 4 times & OFF for 4sec| Device is disabled by the operator (Error 7)
Flash RED 5 times & OFF for 4sec| Device location lock pending (Error 9)
Flash RED 6 times & OFF for 4sec| Device registration pending (Error 5)
Flash RED 7 times & OFF for 4sec| Device Self-Test Failed (Error 12)
Flash RED 8 times & OFF for 4sec| Device is overheating (Error 4)
qsg-R41_eng_23-0925
Copyright © 2023 by Nextivity, Inc., U.S. Patents pending. All rights
reserved. The Nextivity and CEL-FI logos are registered trademarks of
Nextivity, Inc. All other trademarks or registered trademarks listed belong to
their respective owners. Designed by Nextivity, Inc. in California.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>