tenlamp PK King Condenser Mic For Recording User Guide
- June 15, 2024
- tenlamp
Table of Contents
PK King Condenser Mic
FOR RECORDING, PODCAST, STREAMING
PK King Product Parameter
| 1 | Scope of application: | Electret condenser microphone |
|---|---|---|
| 2 | model: | PK king |
| 3 | Sensitivity: | -36dB+2d B(OdB=1 V/Pa at 1kHz) |
| 4 | Output impedance: | 250Ω+30 % (at 1kHz) |
| 5 | Load impedance: | ≤ 1000Ω |
| 6 | Frequency response: | 30Hz -18kHz |
| 7 | Directivity: | Cardioid |
| 8 | Allowable current: | 3mA |
| 9 | Equivalent noise level: | 18dB A |
| 10 | Maximum SPL: | 135dB(at 1kHz≤ 1% T.H.D) |
| 11 | Signal to noise ratio: | 76dB |
| 12 | Accessories | 1 * Microphone |
1 Shock Mount
1 XLR to 3.5mm mic cable
Usage: hanging
Applicable objects: computer, mobile phone, portable sound card recording
Microphone type: condenser microphone
Warm Tips
- For better sound pickup, please face the LOGO of microphone to the Recorder
- When using, please adjust the volume of the recording device to the minimum first, and slowly adjust the volume of the recording device from low to high to a suitable volume, so as to avoid the loudspeaker or earphone from being impacted by the howling sound.
- When you cover the head of the microphone with your hand or bring the microphone close to the speaker or earphone, a howling sound will be produced. In this case, first reduce the volume of the device, and then increase the distance between the microphone and the speaker or earphone
- The microphone core and circuit components inside the microphone are very precise. Be careful not to drop it from a high place or give a strong impact to avoid damage to the microphone core and components.
- The microphone should be stored in a dry and clean place when not in use. Avoid storing or using it in a place where the temperature and humidity are too high, so as not to affect the sensitivity and tone.
Interface Mark
Product size
Connection method
Product Name: PK King Condenser Microphone
Model: PK King
Executive Standard: Q/SZD 001-2017
Phone: 0755-28919761
Web: www.shizhandeng.com
Brand Owner: Shenzhen Shizhandeng Trading Co., Ltd.
Address: Room 601, Block C, 310 Wuhe Avenue, Luhu
Community, Guanhu Street, Longhua District, Shenzhen
Manufacturer: Shenzhen Shizhandeng Technology Co., Ltd.
Address: Room 602, Block C, 310 Wuhe Avenue, Luhu
Community, Guanhu Street, Longhua District, Shenzhen
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>