NEXTIVITY L41-7EB Cel-Fi Solo RED for Public Safety User Guide

NEXTIVITY L41-7EB Cel-Fi Solo RED for Public Safety

Safety Precautions

• When installing the equipment, all the requirements of the manufacturer and the referenced standards must be met.
• There are no user-serviceable parts inside.

Caution
This device may be operated ONLY in a fixed location for in-building use. Home/personal use is prohibited.
External Antenna : Only the antennas listed in the Antenna Kitting section of the user manual are allowed to be used with this device. Use of unauthorized antennas, cables, and/or coupling devices not conforming with ERP/EIRP and/or indoor-only restrictions is prohibited.
Warranty
Nextivity Inc provides a limited warranty for its products. For details, please refer to http://cel-fi.com/war-ranty
Limitation of Liability
In no event shall Nextivity, nor its directors, employees, agents, suppliers, or End Users, be liable under contract, tort, strict liability, negligence, or any other legal or equitable theory with respect to the Products or any other subject matter of this Agreement (i) for any lost profit, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or consequential damages of any kind whatsoever or (ii) for any direct damages in excess of (in the aggregate) the fees actually received by Nextivity from End User with respect to the Products actually purchased and paid for.
See www.cel-fi.com for a list of patents covering this product.

FCC

Part 90 and Part 20 Signal Boosters. THIS IS A 90.219 CLASS B DEVICE WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC License to operate this device. You MUST register Part 90 Class B signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov /signal-boosters/registration. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation.

WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equip-ment and the receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference re- received, including interference that may cause undesired operation.

In order to comply with FCC RF Exposure requirements:

1.  The donor antenna must be installed to provide at least 65 cm separation from the human body at all times.

2.  The server antenna must be installed to provide at least 20 cm separation from the human body at all times.

ISED STATEMENT

WARNING: This is NOT a CONSUMER device. It is de-signed for installation by an installer approved by an ISED licensee. You MUST have an ISED LICENCE or the express consent of an ISED licensee to operate this device.
This device may operate in a fixed l ocation only, for in-building use.
In order to comply with ISED RF Exposure requirements:

1. The donor antenna must be installed to provide at least 65 cm separation from the human body at all times.
2. The server antenna must be installed to provide at least 20 cm separation from the human body at all times.

[French: Afin de se conformer aux exigences d’exposition RF ISED:

1. L’antenne du donneur doit être installée pour fournir une séparation d’au moins 65 cm du corps humain en tout temps.
2. L’antenne du serveur doit être installée pour fournir une séparation d’au moins 20 cm du corps humain en tout temps.

The Manufacturer’s rated output power of this equip- ment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interfer- ence to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.
[FRENCH: La puissance de sortie nominale indiquée par le fabricant pour cet appareil concerne son fonctionnement avec porteuse unique. Pour des appareils avec porteuses multiples, on doit réduire la valeur nominale de 3,5dB, surtout si le signal de sortie est retransmis et qu’il peut causer du brouillage aux utilisateurs de bandes adjacentes. Une telle réduction doit porter sur la puissance d’entrée ou sur le gain, et ne doit pas se faire au moyen d’un atténuateur raccordé à la sortie du dispositif.] This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two con- ditions:

1. This device may not cause interference.
2. This device must accept any interference, in- cluding interference that may cause undesired operation of the device.

[French: L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développe-ment économique Canada applicables aux ap-pareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage ra- dioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionne- ment.]

CAN ICES-3 (A)/NMB-3(A)
Compliance Contact
In the event of regulatory compliance issue, please contact Nextivity Inc. directly. Contact information is available at www.nextivityinc.com.
Patents
This product is covered by Nextivity, Inc., US patents and patents pending. Please refer to cel-fi.com for details.
Copyright
Copyright © 2022 by Nextivity, Inc. All rights reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with prior written permission of Nextivity. Designed by Nextivity in California.
Trademark
Cel-Fi and the Nextivity logo are trademarks of Nex-tivity, Inc.
If you need help, visit: www.cel-fi.com/support.

• Nextivity Inc.
• 16550 West Bernardo Drive, Bldg. 5, Suite 550 San Diego, CA 92127
• www.cel-fi.com
• Nextivity UK Ltd
• Unit 9, Basepoint Business Centre Rivermead Drive, Westlea Swindon SN5 7EX Nextivity Singapore Pte. Ltd.
• 2 Changi Business Park Avenue 1, Level 2 – Suite 16, 486015 Singapore Bureau in Europe Union
• Carrer Bassols 15-1, Barcelona 08026, Spain
• Do not call your service provider until you have read the User Manual. If you need help, visit:www.cel-fi.com/support/

References

• Nextivity
• Nextivity
• Support - Nextivity
• Support - Cel-Fi
• Nextivity - Smart Signal Boosters for Cellular, Critical Comms, HPUE, and Private LTE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>