Ameriwood Home 810569984 Silverton Black Oak Nightstand with USB Charging Instruction Manual

810569984 Silverton Black Oak Nightstand with USB Charging

Product Information: 9426354EBL Nightstand

The 9426354EBL Nightstand is a sturdy and functional piece of furniture designed to help you keep your bedroom organized. It comes with a USB device that complies with part 15 of the FCC Rules, allowing you to charge your electronic devices conveniently.
The nightstand features a Cam Lock Fastening System for easy assembly and has a back panel that must be used to ensure the unit’s stability. It is essential to note that the unit can tip over, causing severe injury or death. Therefore, it should be anchored to the wall stud (if instructed) and kept out of reach of children. The nightstand has lower shelves and drawers that can hold heavy items.

Product Usage Instructions

1. Before starting to assemble the nightstand, read through each step carefully and follow the proper order.
2. Separate and count all parts and hardware and ensure you have enough room for the assembly process.
3. Use a Flat Head Screwdriver, #2 Phillips Head Screwdriver, and Hammer for assembly.
4. Be cautious when using a power drill or power screwdriver for screwing as failing to stop when the screw is tight may result in stripping it.
5. Identify the parts using the board identification chart provided in the manual.
6. Compression dowels should be lightly tapped in with a hammer, and slides are labeled with R (right) and L (left) for proper placement.
7. Ensure that the point on the top of the Cam Lock faces the outer edge always.
8. Use all nails provided for the back panel and spread them equally for stability.
9. Do not use harsh chemicals or abrasive cleaners on the nightstand.
10. Avoid pushing, pulling, or dragging the furniture.
11. If you encounter any difficulty during assembly or use, contact Ameriwood Home customer service team by calling 1-800-489-3351 or visiting www.ameriwoodhome.com.

By following these instructions carefully, you can assemble and use the 9426354EBL Nightstand safely and effectively. Remember to keep the instruction booklet for future reference and never return the product without contacting customer service first.

Contact Us!
Do NOT return this product!
Contact our friendly customer service team first for help.

Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada.

Assembly Tips

Helpful Hints
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

• Open your item in the area you plan to keep it to avoid excessive heavy lifting.

• Identify, sort and count the parts before attempting assembly.

• Compression dowels are lightly tapped in with a hammer.

• Slides are labeled with a R (right) and L (left) for proper placement.

• Make sure to always face the point on the top of the Cam Lock towards the outer edge.

• Use all the nails provided for the back panel and spread them out equally.

• Back panel must be used to make sure your unit is sturdy.

• Do NOT use harsh chemicals or abrasive cleaners on this item.

• Never push, pull, or drag your furniture.

Before You Start

Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.

Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.

2 PEOPLE NEEDED FOR ASSEMBLY

CAUTION:   Failure to use people for assembly could result in unit damage or personal injury

This product contains a USB deice that complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions.

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.

Board Identification

Not actual size

Part List

Actual Size

For this item we provide extra hardware. Please be aware that you will not use all the hardware provided.

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

STEP 7

STEP 8

STEP 9

STEP 10

STEP 11

STEP 12

STEP 13

IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.

Carefully turn the unit onto its front as shown.
Assure that the unit is square.
Distance from corner to corner must be equal.
Attach the Back Panel to the Rear Legs (I & J) with Screws (5).
Finish attaching the Back Panel as shown nailing straight into the raw edges.

STEP 14

bracket orientation

STEP 15

Be sure the groove in the drawer sides are lined up with the groove in the drawer front assembly (L).

STEP 16

STEP 17

Lightly tap with hammer to insert drive fastener (4).

STEP 18

STEP 19 Run the USB charging grommet power cord through the hole in the top (C) and then through the slot in the back panel. Insert the USB charging grommet into the hole on the top (C).

STEP20

STEP21

Please note: The drawer brackets (11) have slotted holes in them. To adjust drawer fronts, loosen screws attaching drawer brackets to drawer front, make needed adjustments and retighten screws.

Maximum Loads
 This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury.

Warning: Risk of injury to persons – do not place a television on this furniture. This furniture is not approved for use with a television.

Certificate of Conformity

1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual.

2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).

3. This product is distributed by: Dorel Home Furnishings, Inc.
   410 East First Street South
   Wright City, MO 63390
   636-745-3351

4. Site of Manufacture: Cornwall, ON

5. See front page of instruction manual for date of manufacture.

Register your product to receive the following:

• • New trend details – sneak peek on what’s new
• • Surveys – have a voice within our community
• • Exclusive deals and discount codes
• • Quick and easy replacement part service

To register your product, visitameriwoodhome.com

Visit your local retailer’s website, rate your purchased product and leave us some feedback!

We would like to extend a big “Thank You” to all of our customers for taking the time to assemble this Ameriwood Home product, and to give us your valuable feedback.

ameriwoodhome.com

References

• Ameriwood Furniture | Living Room Furniture | Entertainment Centers
• Ameriwood Furniture | Living Room Furniture | Entertainment Centers

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>