GEOYEAO BT103 Bluetooth Sound Bars for TV with Dual Subwoofer User Manual
- June 9, 2024
- GEOYEAO
Table of Contents
BT103 Bluetooth
Sound Bars for TV with Dual Subwoofer
User Manual
FEATURES
TV Sound Connect
TV Sound Connect lets you listen to audio from your TV on your Soundbar via
wired connection and lets you control the sound.
HDMI ARC
The unit is equipped with the ARC function which lets you listen to sound from
your TV through the Soundbar via an HDMI cable. This function is only
available if you connect the unit to an ARC compliant TV.
3D SOUND
The 3D SOUND feature adds depth and spaciousness to your listening experience.
Special Sound Effects
You can select 10 different Sound Effects – CLASS / ROCK / POP /JJAZZ / LINE /
CLUB / DRAM / HALL / SOFT / FLAB depending on the type of content you want to
enjoy.
Multi-function Remote Control
You can use the supplied remote control to control various operations with the
simple press of a button.
USB Support
‘You can connect and play music files from external USB storage devices such
as MP3 players, USB flash memory, etc.
Bluetooth
‘You can connect a Bluetooth device to the Soundbar and enjoy music with high
quality stereo sound, all without wires!
Aux / Coaxial / Optical Connection
In addition to HDMI, we also provide more perfect connection methods to meet
the connection needs of different devices.
SAFETY INFORMATION
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO
USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
Warning
- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
- To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
Caution
- Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.
- To turn this apparatus off completely, you must pull the power plug out of the wall socket.
Consequently, the power plug must be easily and readily accessible at all times.
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all
the safety instructions listed below. Keep these operating instructions handy
for future reference.
- Read these instructions.
- Keep these Instructions.
- Heed all wamings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufactur er’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus| (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachment/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms: or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
PRECAUTIONS
Ensure that the AC power supply in your house complies with the power
requirements listed on the identification sticker located on the back of your
product. Install your product horizontally, on a suitable base (furniture),
with enough space around it for ventilation (8~4 inches). Make sure the
ventilation slots are not covered. Do not place the unit on amplifiers or
other equipment which may become hot. This unit is designed for continuous
use.
To fully turn off the unit, disconnect the AC plug from the wall outlet.
Unplug the unit if you intend to leave it unused for a long period of
time.During thunderstorms, disconnect the AC plug from the wall outlet.
Voltage peaks due to lightning could damage the unit.Do not expose the unit to
direct sunlight or other heat sources. This could lead to overheating and
cause the unit to malfunction.Protect the product from moisture (i.e. vases),
and excess heat (e.g. afireplace) or equipment creating strong magnetic or
electric fields. Disconnect the power cable from the AC supply if the unit
malfunctions. Your product is not intended for industrial use. It is for
personal use only. Condensation may occur if your product has been stored in
cold temperatures. If transporting the unit during the winter, wait
approximately 2 hours until the unit has reached room temperature before
using. The batteries used with this product contain chemicals that are harmful
to the environment Do not dispose of batteries in the general household trash.
Do not dispose of batteriesin a fire. Do not short circuit, disassemble, or
overheat the batteries. Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
GETTING STARTED
What’s included
Check for the supplied accessories shown below.
Descriptions
TOP/FRONT PANEL BACK PANEL USB Port (Support Maximum 128GB
USB2.0/USB3.0 drive, system format supports exFAT, FW32 files but does not
support NTFS file)
Aux Port (Connect to the Analog output of an external device. eg: TV’s
Audio Out/3.5mm Headphone Out Port)
COAXIAL Port (Connect to the digital (coaxial) output of an external
device.)
OPTICAL Port (Connect to the digital (optical) output of an external
device.)
HDMI ARC Port (Inputs digital video and audio signals simultaneously
using an HDMI cable.
Use when connecting a supported external device.)
DC IN (Connect the DC power adaptor to the power supply jack, and then
connect the AC power adaptor plug to a wall outlet.)
Line Out
Remote Control
BUTTONS AND FUNCTIONS
Installatio
Preparation Placement
-
There are 3 installation ways as you like to fix the product.
Installing the sound bar
-
Wall Mounting,
Before wall mounting, make sure the wall can support the weight of your SoundBar.
Improper wall mounting may result in accident, injury or damage.
Step 1: Align the SoundBar in the chosen location. Use a pencil to mark the drilling positions apart.
Note: The SoundBar should be located at least 7.5cm below the bottom of the TV.
Step 2: Drill holes as marked in step 1.
► Installation Precautions
Installing the sound bar
• Install on a vertical wall only.
• For the installation, avoid a location with high temperature orhumidity, or a wall that cannot sustain the weight of the set.
• Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the unit on a different wall that can support the unit’s weight.
• Connect cables from the unit to external devices before you install it on the wall.
• Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
1. Place the installation guide against the wall surface.
• The installation guide must be level.
• Install at least 2 inches (5 cm) below the TV, if the TV is mounted on the wall.
2. Mark the location where the screws will go through on the wall using a pen.
3. Fasten the screws to the marked locations.
4. Set the holder screws on the back of the Soundbar into the grooves of the wall mount.
For safe installation, make sure to push the holder screws all the way to the bottom of the grooves. -
Take Apart
If you want to use two parts separately, the steps are reversed
1. Pull out the short line cable
2. Rotate the Sound Blaster clockwise to loosen the connection
3. Find the corresponding desktop spacer, align the protruding hole, and then rotate to fix it
Our Detachable Design for Install Sound bar
- Align the notch shape (with specific edges), then insert.
- Rotate counterclockwise after insertion to complete the installation.
- Insert the short line cable to connect two parts.
CONNECTING THE SOUNDBAR
Connecting Electrical Power
Use the power adapter to connect the Soundbar to an electrical outlet:
- Connect the power cord to the Sound bar.
- Connect the power cord to a wall socket.
CONNECT YOUR SOUNDBAR TO EXTERNAL DEVICES
This section helps you connect your soundbar to a TV and other devices, and
set up the whole system.
Connect Soundbar to your TV
Warm Tips:
-
Depending on the TV and audio system, the connection methods are also different.
According to the following connection methods, you can choose the method that suits you. -
After connect sound bar, you need to enter the TV’s setting menu to set Audio Format.
For specific operation steps, please refer to the TV’s manual.
Connect to TV through HDMI ARC if the HDMI interface of the TV supports ARC
- If it is connected to a relatively new TV, that is, the HDMI interface supports the ARC function, you can use the HDMI cable to connect the TV HDMI (ARC) Out interface of the TV to the sound bar.
- After connection, press Mode on the sound bar or Mode on the remote control to select ARC to play audio from your output device.
- Some TV’s HDMI® ARC is disabled by default. It can be enabled only when the Soundbar is connected to a TV that supports the ARC function. This feature may also be called T-Link, Anynet+, SimpLink, BRAVIA Link, EasyLink or VIERA Link. To enable HDMI® ARC, please follow step-by-step in your TV’s instructions.
- Our sound bar system is not Dolby compatible. You should to enter into your TV’s setting page. Go to Setting-Audio Format – Chose PCM.
Note:
-
If the HDMI interface of the TV supports ARG, it will have the ARC logo on the HDMI port.
If the HDMI Port does not have this logo, it will not support the ARC function. Then you can use HDMI ARC to connect the sound bar. Let’s try the other connection way. -
This function is not available if the HDMI cable does not support ARC. HDMI ARC cable usually have 19+1 pins. You can try the other connection methods.
Connect to TV through Optical Port
An Optical connection supports digital audio and is an alternative to an HDMI
ARC audio connection.
- Use an optical cable to connect the optical interface of the TV to the Optical in interface of the Sound bar.
- After connection, press Mode on the unit repeatedly or Mode on the remote control to select Optical to play audio from your input device.
- Our sound bar system is not Dolby compatible. You should to enter into your TV’s setting page. Go to Setting-Audio Format – Chose PCM.
Note: Confirm to set your TV audio settings to support “external speakers” and disable the built-in TV speakers. Connect to TV through Coaxial
- Use a coaxial cable to connect the soundbar’s COAXIAL socket to the COAXIAL OUT socket of the external device.
- After connection, press Mode on the unit repeatedly or Mode on the remote control to select COAXIAL to play audio from your input device.
- Our sound bar system is not Dolby compatible. You should to enter into your TV’s setting page. Go to Setting-Audio Format – Chose PCM.
Connect to TV through Aux
- Use an audio cable to connect the audio output of the TV to the ANALOG IN jack of the Soundbar.
- After connection, press Mode on the sound bar repeatedly or Mode on the remote control to select Aux to play audio from your input device.
Connect to TV through red and white interface
- Use analog audio cable to transmit stereo (red and white interface). Insert the Aux port to the sound bar.
- Insert red & white port on your TVAudio Out interface
- After connection, press Mode on the sound bar repeatedly or Mode on the remote control to select Aux to play audio from your input device.
Connect Soundbar to other devices
AUX Connection
Connect devices through analog audio cables
Using an analog cable, connect the AUX IN (3.5mm jack) on your soundbar to the
AUX out/ 3.5mm connectors on your portable devices.
USB Connection
This Sound Bar can be connected to USB2.0, USB3.0 U disk, the maximum support
is 128G.
Support APE, FLAC, WMA, WAV, MP3, M4A audio formats.
The file system format supports exFAT, FAT32, does not support NTFS.After the
USB is plugged in, the sound bar will automatically play the audio file
inside. If it does not play, please verify whether the USB flash drive is a
supported system format and supported USB flash drive files.
Bluetooth Connection
a) Press Mode on sound bar panel or Mode button on remote controller to
enter Bluetooth Mode. You’ll see the bb is blinking.
b) Select” BT103 ” to pair with the soundbar Steps: Setting -> Bluetooth
->BT103
Remark: Our Bluetooth has a memory function, it will automatically
connect to the last paired device when BT it is on next time. If you want to
switch devices, please disconnect the connected Bluetooth first.
USE YOUR SOUNDBAR SYSTEM
To Control
a. How to use top panel controls Next/Vol + – Short press for next song.
Long press for volume +
Previous / Vol – Short press for previous song. Long press for volume –
Pause / Play
Power / Mode – Short press for switch Mode. Long press for Power On / Off.
b. How to use Remote Control
PRODUCT SPECIFICATIONS
| General | Input and Output |
|---|---|
| Power Input: 100-240VAC, 1.0A | HDMI ARC |
| Channel: 2.1 | Aux |
| Optical | |
| Coaxial | |
| Bluetooth, USB _(Bluetooth section) | |
| Bluetooth Version: 5.0 | |
| Bluetooth Frequency Range :>= 10M |
TROUBLESHOOTING
If you have problems using this product, you can check the following points.
System
The unit will not turn on.
- Check if power cord is plugged into the outlet and the soundbar
Sound
No sound from soundbar.
- Make sure that the soundbar is not muted.
- On the remote control or sound bar panel, select the correct mode source.
- Try another connection method, such as Bluetooth, to verify whether it is a connection problem
Sound is strange after sound setting adjustment
- Reset audio setting by press EQ to find the right sound settings
Bluetooth Connect Failed
- The soundbar is already connected with another Bluetooth device (If connected, the spot below the bb will not flashing). Disconnect the previously connected device.
- Reboot your Bluetooth device and try to pair again with the soundbar.
Quality of audio play from a connected Bluetooth device is poor.
- The Bluetooth reception is poor. Move the source device closer to the soundbar, or remove any obstacle between the source device and the soundbar.
The connected Bluetooth device connects and disconnects constantly.
- The Bluetooth reception is poor. Move your source device closer to the soundbar, or remove any obstacle between your Bluetooth device and the soundbar.
- For some Bluetooth device, the Bluetooth connection can be deactivated automatically to save power. This does not indicate any malfunction of the soundbar.
Remote Control
The remote control does not work.
- Check if the batteries are drained and replace with new batteries.
- If the distance between the remote control and the main unit is too far, move it closer to the unit.
- If the problems still exist, contact customer service to replace it.
Does this Sound Bar work with any TV?****
– The Sound Bar is compatible with any TV that has one of the these ports:
– HDMI supporting ARC (preferred);
– Optical out port;
-Coaxial out port.
– Audio out/3.5mm Headphone output.
Can this soundbar remember the volume level at power off and retain the same level when powering on?****
– Yes, the volume has a memory function, it will remember the last volume level.
Can I use bluetooth headphones with sound bar?****
– No, the bluetooth functionality is to allow you to play music from your smartphone out of the soundbar. It’s not possible to output bluetooth to your headphones.
How long is the line cable when I want to seperate fix the sound bar?****
– It’s 58 Inch. When you want to separate them and use them separately, the maximum spacing should not exceed 58 inches.
Can you use alexa to control the volume?****
– It doesn’t compatible with Alexa or google but the remote control is very sensitive which can be used within 15 meters.
Will I need to drill holes in the wall to install?****
– I’m afraid that you have to drill two holes if you hang it under your tv.
Does this have an auto turn on function? So if I turn on my tv this will turn on as well?****
– No, unfortunately, it will not turn on/off with the TV.
I connected optical cable to Samsung tv…why do i get only loud static? no tv sound… just static?****
– Please check that all cabling is connected/inserted correctly. Also, make
sure the audio format setting on your TV is set as PCM 2 channel and the
correct audio input mode has been selected.
– If you have not selected 2-Channel PCM but Dolby as the audio format setting
for your TV set, then it can result in buzzing, hissing or white noise coming
from the soundbar.
Our tv goes loud sometimes. Does this mimic the tv sound? If my tv goes loud (on its own) will the sound bar go loud as well?****
– It would allow for independent volume control, but if you vol + / – the connected devices, the sound bar’s volume will change.
Our tv goes loud sometimes. Does this mimic the tv sound? If my tv goes loud (on its own) will the sound bar go loud as well?****
– It would allow for independent volume control, but if you vol + / – the connected devices, the sound bar’s volume will change.
I have a projector, I need an external speaker to plug into the 3.5mm audio out. Will this work and does it have stereo sound?****
– Yes, you can use Aux cable in the package and insert it to Aux port and insert the other side to 3.5mm stereo line port on your projector. The speakers are stereo.