Adviti AD-NL-6148BL4 Tos LED Floodlight Instruction Manual
- June 3, 2024
- Adviti
Table of Contents
Adviti AD-NL-6148BL4 Tos LED Floodlight
Directions for safety use
Before using the device, read this Operating Instruction and keep it for
future use. Any repair or modification carried out by yourselves results in
loss of guarantee. The manufacturer is not responsible for any damage that can
result from improper device installation or operation. In view of the fact
that the technical data are subject to continuous modifications, the
manufacturer reserves a right to make changes to the product characteristics
and to introduce different constructional solutions without deterioration of
the product parameters or functional quality. Additional information and
technical support related to the product is available at
www.support.adviti.pl. Orne-Logistic Sp. z o.o. holds no responsibility for
the results of noncompliance with the provisions of the present Manual. Orne
Logistic Sp. z o.o. reserves the rightto make changes to the Manual – the
latest version of the Manual can be downloaded from www.support.adviti.pl. Any
translation/interpretation rights and copyright in relation to this Manual are
reserved.
- Disconnect power supply before any activities on the product.
- Do not immerse the device in water or other liquids, do toothrow it into fire, do not disassemble it.
- Do not cover the device during its operation.
- Do not operate the device when its housing is damaged.
- Do not open the device and do not repair it by yourselves.
- Do not use the device contrary to its dedication.
- The product cannot be dismantled. If the light source is damaged, it cannot be repaired.
- The chipped globe, screen or protective shield must be replaced immediately.
- The minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
- Risk of electric shock.
- The product is not compatible with lighting dimmers.
- Do not look at LEDs directly from up close.
- Product compliant with CE standards.
- Protection class I.
- The product is suitable for indoor and outdoor installation.
- Recycling information. Each household is a user of electrical and electronic equipment, and hence a potential producer of hazardous waste for humans and the environment, due to the presence of hazardous substances, mixtures and components in the equipment. On the other hand, used equipment is valuable material from which we can recover raw materials such as copper, tin, glass, iron and others. The weee sign placed on the
equipment, packaging or documents attached to it indicates the need for selective collection of waste electrical and electronic equipment. Products so marked, under penalty of fine, cannot be thrown into ordinary garbage along with other waste. The marking means at the same time that the equipment was placed on the market after August 13, 2005. It is the responsibility of the user to hand the used equipment to a designated collection point for proper processing. Used equipment can also be handed over to the seller, if one buys a new product in an amount not greater than the new purchased equipment of the same type. Information on the available collection system of waste electrical equipment can be found in the information desk of the store and in the municipal office or district office. Proper handling of used equipment prevents negative consequences for the environment and human health!
Intended use/purpose
The floodlight is designed for indoor and outdoor use (corridors, staircases, garages, utility rooms, parking, garden lighting, property, facades, etc.). Uses SMD 2835 LEDs as light source. The housing made of resistant PC, and the appealing design makes this floodlight perfectly integrated with all interiors.
Installation
-
Make sure that the main power supply has been disconnected before starting the installation.
-
Remove the screws in the lamp base to remove the protective cover. Pull the wires through the holes in the base (fig.1).
-
Fix the bottom for the selected position with screws (fig.3, fig.4).
-
Connect the wires according to the wiring diagram (fig. 2).
-
Mountthe protective cover in the lamp base. Turn on the main power and testthe operation of the unit.
The floodlight can also be installed directly to the wall (fig.3)
or in a corner with a special mounting bracket (fig.4).
Technical data
- Nominal voltage: 230V-, 50Hz Power:30W
- Luminous flux: 2200lm
- Light source: LED SMD
- Color temperature: 4000K
- Light color (designation): neutral white Color rendering index Ra/CRI: 85 Lifespan: 50 OOOh
- Number of switching cycles: 100 000
- Working temperature: -20++40°C
- Impact protection IK (shock resistance): IK10
- Ingress protection IP: IP65
- Material: Polycarbonate PC
- Dimensions: 225×171.Sxl 99mm
- Net weight: 0.60kg
Safety and maintenance
- Any maintenance shall be carried out after the power source has been switched off.
- Clean with dry and delicate cloths only.
- Do not use chemical cleansers.
- Do not cover the product.
- Provide free air access.