Adviti AD-OP-6109WLPM4 Piryt LED Garden Luminaire Instructions
- June 15, 2024
- Adviti
Table of Contents
Adviti AD-OP-6109WLPM4 Piryt LED Garden Luminaire
Model
- AD-OP-6109WLPM4
Directions for safety use
Before using the device, read this Operating Instruction and keep it for future use. Any repair or modification carried out by yourselves results in a loss of guarantee. The manufacturer is not responsible for any damage that can result from improper device installation or operation. Installation of the device should be carried out by an experienced person familiar with the relevant installation regulations in force in the country concerned or by an electrician. In view of the fact that the technical data are subject to continuous modifications, the manufacturer reserves the right to make changes to the product characteristics and to introduce different constructional solutions without deterioration of the product parameters or functional quality. Additional information and technical support related to the product is available at www.support.adviti.pl. Orno- Logistic Sp. z o.o. holds no responsibility for the results of non-compliance with the provisions of the present Manual. Orno Logistic Sp. z o.0. reserves the right to make changes to the Manual – the latest version of the Manual can be downloaded from www.support.adviti.pl. Any translation/interpretation rights and copyright in relation to this Manual are reserved.
- Disconnect the power supply before any activities on the product.
- Do not immerse the device in water or other fluids.
- Do not cover the device during its operation.
- Do not operate the device when its housing is damaged.
- Do not open the device and do not repair it by yourselves.
- Do not use the device contrary to its dedication.
- The product cannot be dismantled. If the light source is damaged, it cannot be repaired.
- The chipped globe, screen or protective shield must be replaced immediately.
- The minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
- Risk of electric shock.
- The product is not compatible with lighting dimmers.
- Do not look at LEDs directly from up close.
- Product compliant with CE standards.
- Protection class II.
- The product is suitable for indoor and outdoor use.
- Recycling information.
Each household is a user of electrical and electronic equipment, and hence a potential producer of hazardous waste for humans and the environment, due to the presence of hazardous substances, mixtures and components in the equipment. On the other hand, used equipment is valuable material from which we can recover raw materials such as copper, tin, glass, iron and others. The sign placed on the equipment, packaging or documents attached to it indicates the need for selective collection of waste electrical and electronic equipment. Products so marked, under penalty of fine, cannot be thrown into ordinary garbage along with other waste. The marking means at the same time that the equipment was placed on the market after August 13, 2005. It is the responsibility of the user to hand the used equipment to a designated collection point for proper processing. Used equipment can also be handed over to the seller if one buys a new product in an amount not greater than the newly purchased equipment of the same type. Information on the available collection system of waste electrical equipment can be found at the information desk of the store and in the municipal office or district office. Proper handling of used equipment prevents negative consequences for the environment and human health!
Intended use/purpose
- The garden luminaire is characterized by high durability and quality.
- Placed on the facades of buildings or concrete fences in the gardens, it creates a unique lighting scene.
- The modern SMD LEDs are used to guarantee high energy efficiency and a long life of the device.
Installation
- Switch off the power.
- Prepare the equipment needed for installation.
- Unscrew the screw and separate the lamp from the base.
- Pull the wires through the hole in the base and connect the wires according to the diagram.
- Drill holes in the wall and screw the base to the desired location using screws.
- Attach the lamp to the base.
- Switch on the power and test it.
Technical data
- Nominal voltage: 230V~, 50Hz
- Light source: SMD LED
- Power/luminous flux: 10W / 800|m
- Colour temperature: 4000K
- Light colour (designation): neutral white
- Colour rendering index Ra/CRI: >80
- Working temperature: -20÷+40°C
- Material: Polycarbonate PC
- Impact protection IK (shock resistance): IK10
- Ingress protection IP: IP54
- Dimensions: 188×250×66mm
- Net weight: 0.90kg
Safety and maintenance
- Any maintenance shall be carried out after the power source has been switched off.
- Clean with dry and delicate clothes only. Do not use chemical cleansers. Do not cover the product.
- Provide free air access.
CONTACT
- ORNO-LOGISTIC Sp. z o.0.
- ul. Rolników 437, 44-141 Gliwice, Poland
- tel. (+48) 32 43 43 110, www.adviti.pl