WEILY X88 Pro 13 Ultra HD 8K TV Box User Guide
- June 15, 2024
- WEILY
Table of Contents
WEILY X88 Pro 13 Ultra HD 8K TV Box
QUICK GUIDE
-
STB
-
Instructions
-
Remote Control
-
Power Adapter
-
Packing box
-
HDMI Cable
DEVICEINFORMATION
- DC
- SPDIF
- HDMI
- LAN
- AV
- MICRO SD
- USB3.0
- USB 2.0
SETUP DIAGRAM
Boot into the wizard page
Language selection
- Language-Screen Zoom → WiFi → Launcher → Area selection
- Complete the above steps lo confi1m junior into the interface
Area selection
Please select your corresponding area
Switch in the applications
CIiek “My Apps” to view recently used programs, ell ck program Icon lo switch application arbitrarily
WIFI Function
- Home Screen–>SETTINGS–>Network–>Select ‘Wi-Fi” to open WIFI function
- Choose Hotspol –>lnput Password–>Connect to the network
Ethernet Function
- Home Screen–>SETTI NGS–>Network–>Select “Ethernet” to open Ethernet function
- Insert network cable, network will be connected automatically
File Browser
Move to “File browser”. Press OK to enter into the device list.
When inserting with USB device or SD/SDHC/MMC cards, the sign “Device is
mounting’ will be shown on the screen.
Here you can cut, Copy, paste and move the files and folder between the local
disk and external storage card.
Read TF card Insert TF card into the device in the status of power on , when icon appears in top left corner of the desktop, open “File Browser·, the identified External Storage Card will appear under “”Local Disk, TF card’s operation is available now.
Warn
Under no circumstances should you try to repair the TV BOX by yourself, as this will invalidate the warranty. Do not open the TV BOX as there Is a r1sk or electric shock. If a fault occurs, firstly check with points listed below before taking the TV BOX for repair. If you are unable to remedy a the problem by followin9 hints, consult your dealer for help.
| Problem | Solution |
|---|---|
| No power |
- Check if the power adaptor is properly connected to the power and the TV BOX.
- Press the cower on the remote controller to turn on the cower.
No picture|
- Re-connect with HDTV cable or AV cable.
- Check if the TV is switched on.
No sound or distorted sound|
- Adjust the volume.
- Check it the speakers are connected correctly.
No audio or digital output|
- Check the digital connections.
- Check if your amplifier is set correctly.
The player does not respond to the Remote Control
Player does not respond to some operating commands during playback
|
- Aim the remote control directly at the sensor on the front of the TV BOX.
- Reduce the distance to the TV BOX.
- Replace the batteries in the remote control.
- Operations may not be permitted. Refer to the user manual.
- Possibility of system halted, re-insert with power adaptor to restart.
No sound during movies playback|
- The audio codec may not be supported by the TV 6OX.You can change to the supported audio on playing menu.
- Check the volume.
The contents of the USB Rash drive cannot be read|
- The USB flash drive format is not compatible with the box.
- If one of the USB can not be read, please turn off the TV BOX for 30 seconds and restart the TV BOX.
Sl ow operation of the USB flash drive|
- Big file size or high resolution USB flash drive takes longer time to read and display on the TV screen.
---|---
No sound with HDTV connection|
- Check the connect ion between the TV and the HDTV jack of box.
- Check your TV system setup.
- Check the volume.
The TV screen is blank and the player LED is blinking|
- Turn off your TV BOX .wait 30 seconds. turn it on again.
- If under HDTV status, check if HDTV connection is correct or change another HDTV cable, set the output resolution of this TV BOX into 720p.
*Sorry to the changes of our products parameters but t without notice.
