Universal T8 LED Tube Osram SubstiTUBE Instruction Manual
- June 10, 2024
- OSRAM
Table of Contents
T8 LED Tube Osram SubstiTUBE
Instruction Manual
Universal T8 LED Tube Osram SubstiTUBE
| |
---|---|---
PDF ECG compatibility list| TUBE FINDER Web-app| Installation
Guide
https://www.ledvance.com/professional/services/led-lamps-compatibility/ecg-
compatibility/index.jsp| http://ledvance.com/tubefinder|
https://www.ledvance.com/professional/services/downloads/index.jsp
It is mandatory to operate OSRAM LED Tubes only with compatible ECGs listed at
TUBE FINDER Web app
www.ledvance.com/tubefinder or
https://www.ledvance.com/professional/services/led-lamps-compatibility/ecg-
compatibility/index.jsp
File name: Ballast Compatibility list SubstiTUBE Universal T8, T5 HF and
T8 HF GenX LEDVANCE does not accept any responsibility, warranty or liability
when using ECGs not mentioned, marked as non-compatible ECGs or when using
successor /different Reference No. models of tested ballasts.
The instruction contains important information and notes regarding the installation and operation of the SubstiTUBE® HF. SubstiTUBE® T8 HF LED tube is suitable as replacement for T8 fluorescent lamps with G13 bi-pin bases. HF tubes can be fitted as a replacement into luminaires operating on electronic control gear (HF). The operating temperature range of SubstiTUBE T8 HF LED tube is restricted. In case of doubt regarding suitability of the application. Please find and measure Tc point and max Tc temperature marked on the product. In case of multi-lamp luminaire application measure Tc max temperature of all installed lamps. Please use a flexible thermosensor (e.g. “Type K”). Please find additional temperature relevant information at product datasheet. It is not allowed to connected SubstiTUBE T8 HF LED tube on direct mains (220-240V) or electro magnetic control gear (CCG).
-
It is mandatory to operate OSRAM LED Tubes only with compatible ECGs listed at TUBE FINDER Web app www.ledvance.com/tubefinder or https://www.ledvance.com/professional/services/led-lamps-compatibility/ecg-compatibility/index.jsp
File name: Ballast Compatibility list SubstiTUBE Universal T8, T5 HF and T8 HF GenX.
LEDVANCE does not accept any responsibility, warranty or liability when using ECGs not mentioned, marked as non-compatible ECGs or when using successor/different Reference No. models of tested ballasts.
ECG is compatible: Go to Installations on HF (ECG) compatible ballast -
The temperature range of SubstiTUBE T8 HF is more restricted. In case of doubt regarding the suitability of the application the manufacturer of this lamp should be consulted.
-
SubstiTUBE® T8 HF LED tube emits light only with a limited beam angle, not like a fluorescent tube with 360° output. Due to the characteristic light distribution of the SubstiTUBE® T8 HF LED tube, the resulting luminaire light characteristic is likely to change.
-
The SubstiTUBE® T8 HF LED tube is designed for general lighting application (excluding for example explosive atmosphere).
| SubstiTUBE®
T8 HF| HF| | | |
---|---|---|---|---|---|---
Meaning| Compatible with HF| High Frequency =
Electronic Control
Gear (ECG)| Lamp not suitable
for emergency
operation| Lamps to be used in dry conditions or in a luminaire that provides
protection| Dimming not allowed| Lamp suitable for
high frequency
operation
| Replacement of T8 FL| Storage temperature (Ts)| Ambient temperature (Ta)
free air
---|---|---|---
LEDTUBE T8 HF PRO
1200 14W 8xx| 36 W: 1.2 m| -20° … 80°C| -20° … 45°C
LEDTUBE T8 HF PRO
1500 20W 8xx| 58 W: 1.5 m| -20° … 80°C| -20° … 45°C
LEDTUBE T8 HF PRO
600 7.5W 8xx| 18 W: 0.6 m| -20° … 80°C| -20° … 45°C
LEDTUBE T8 HF PRO UO
1200 15W 8xx| 36 W: 1.2 m| -20° … 80°C| -20° … 45°C
LEDTUBE T8 HF PRO UO
1500 23W 8xx| 58 W: 1.5 m| -20° … 80°C| -20° … 45°C
LEDTUBE T8 HF VAL
600 8W 8xx| 18 W: 0.6 m| -20° … 80°C| -20° … 45°C
(8xx = 830, 840, 865)
Installations on HF (ECG) compatible ballast. Please check the latest update
of the compatibility list
https://www.ledvance.com/professional/services/led-lampscompatibility/ecg-
compatibility/index.jsp
File name: Ballast Compatibility list SubstiTUBE Universal T8, T5 HF and
T8 HF GenX or check compatibilty with TUBE FINDER Web-app
www.ledvance.com/tubefinder
Instructions on HF (ECG) compatible ballast
LEDVANCE GmbH
Steinerne Furt 62
86167 Augsburg, Germany
www.ledvance.com
LEDVANCE Ltd, Aquila House
Delta Crescent, Westbrook, Warrington
WA5 7NR, United Kingdom
References
- Corporate website | LEDVANCE
- Tube Finder | LEDVANCE
- Corporate website | LEDVANCE
- Professional Home | LEDVANCE
- Services and Tools | LEDVANCE | LEDVANCE
- LED lamps compatibility | LEDVANCE
- ECG compatibility | LEDVANCE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>