PFJ-LUX SRL LINEA-1DIMPFJ Light User Manual
- June 1, 2024
- PFJ-LUX
Table of Contents
PFJ-LUX SRL LINEA-1DIMPFJ Light
Specifications
- Power supply: CR2032 battery
- Encoding: Rolling code
- Radio frequency: 433.92MHz
- Range: 100m (nominal)
Technical Data
| Power supply | CR2032 battery |
|---|---|
| Encoding | Rolling code |
| Radio frequency | 433.92MHz |
| Range | 100m (nominal) |
Product Usage Instructions
Transmitter Programming with Access to Receiver
Requirements: Access to the recipient’s programming keys
- Activate the receiver you want to use the transmitter with in radio programming of generic transmitters mode.
- Select the function you want to associate with the key (refer to the receiver manual).
- Press the desired key; the receiver’s LED will flash three times to confirm reception.
Transmitter Programming Near the Receiver
Requirements: A transmitter already programmed / proximity to the receiver
- With the programmed transmitter, simultaneously press buttons 1 and 2 of the transmitter until the LED flashes (about 3 seconds).
- Using the programmed transmitter, press the button associated with the control unit you want to activate.
- With the new transmitter, press the button you want to program.
Battery Replacement
- Type: CR2032 battery
- Follow manufacturer instructions for safe battery replacement.
Remote Control Functions
- ON – Turn on device
- OFF – Turn off device
- DIM + – Increase brightness
- DIM – – Decrease brightness
RF Exposure Statement
This equipment complies with the FCC radiation exposure limits set forth
for an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
FCC Warning
FCC ID: 2BEKD-LINEA-1DIMPFJ
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Frequently Asked Questions (FAQ)
What type of battery does the product use?
The product uses a CR2032 battery for power.
What is the radio frequency range of the product?
The product operates at a radio frequency of 433.92MHz with a range of 100m.
What should I do if I experience interference with the transmitter?
Try reorienting or relocating the receiving antenna, increasing separation between the equipment and receiver, connecting the equipment to a different outlet, or consulting with a professional technician.
How do I replace the battery in the transmitter?
Open the battery compartment according to the diagram and replace the battery with a new CR2032 type, making sure to match the correct polarity.
What is the range of the transmitter?
The nominal range of the transmitter is 100 meters.
What type of battery does the transmitter use?
The transmitter uses a CR2032 battery.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>