ShelterLogic 26019, 10072 Max AP Canopy Instruction Manual
- June 8, 2024
- ShelterLogic
Table of Contents
Max AP ™ Canopy
10′ x 20′ / 3 x 6,1 m
#26019 / #10072
TEMPORARY STRUCTURE
STRUCTURE TEMPORAIRE
ESTRUCTURA TEMPORAL
26019, 10072 Max AP Canopy
ATTENTION: This shelter product is manufactured with quality materials.
It is designed to fit the custom fabric cover included. ShelterLogic ® Group
Shelters offer storage and protection from damage caused by sun, light rain,
tree sap, animal
– bird excrement and light snow. Please anchor this structure properly. See
manual for more anchoring details. Proper anchoring, keeping cover tight and
free of snow and debris is the responsibility of the consumer. Please read and
understand the installation detail, warnings and cautions prior to beginning
installation. If you have any questions call the customer service number
listed below. Please refer to the warranty card inside this package.
DANGER: Prior to installation, consult with all local municipal codes
regarding installation of temporary shelters. Choose the location of your
shelter carefully. DANGER: Keep away from electrical wires. Check for overhead
utility lines, tree branches or other structures. Check for underground pipes
or wires before you dig. DO NOT install near roof lines or other structures
that could shed snow, ice or excessive run off onto your shelter. DO NOT hang
objects from the roof or support cables.
WARNING: Risk of fire. DO NOT smoke or use open flame devices (including
grills, fire pits, deep fryers, smokers or lanterns, etc.) in or around the
shelter. DO NOT store flammable liquids (gasoline, kerosene, propane, etc.) in
or around your shelter. Do not expose top or sides of the shelter to open fire
or other flame source.
CAUTION: Use CAUTION when erecting the frame. Use safety goggles during
installation. Secure and bolt together overhead poles during assembly. Be
aware of pole ends.
PROPER ANCHORING AND INSTALLATION OF FRAME : PROPER ANCHORING OF THE
FRAME IS THE RESPONSIBILITY OF THE CONSUMER. ShelterLogic ® Group is not
responsible for damage to the unit orthe contents from acts of nature. Any
shelter that is not anchored securely has the potential to fly away causing
damage, and is not covered under the warranty. Periodically check the anchors
to ensure stability of shelter. ShelterLogic ® Group cannot be responsible for
any shelter that blows away. NOTE: Your shelter’scover can be quickly removed
and stored prior to severe weather conditions. If strong winds or severe
weather is forecast in your area, we recommend removal of cover.
REPLACEMENT PARTS, ASSEMBLY, SPECIAL ORDERS : Genuine ShelterLogic ®
replacement parts and accessories are available from the factory, including
anchoring kits for nearly any application, replacement covers, wall and
enclosure kits, vent and light kits, frame parts, zippered doors and other
accessories. All items are shipped factory direct to your door. QUESTIONS –
CLAIMS – REPLACEMENT PARTS? CALL OUR CUSTOMER SERVICE HOTLINE:
U.S.A: 1-800-524-9970
INTERNATIONAL:
001-860-945-6442
CANADA: 1-800-559-6175
HOURS OF OPERATION: MON-FRI 8:00AM-8:00PM ET, SAT-SUN 8:00AM-4:30PM ET.
(English, French, Spanish, Portuguese, Italian, Arabic)
CARE AND CLEANING:
A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can accelerate deterioration of cover fabric. Immediately remove any accumulated snow or ice from the roof structure with a broom, mop or other soft-sided instrument. Use extreme caution when removing snow from cover- always remove from outside the structure. DO NOT use hard-edged tools or instruments like rakes or shovels to remove snow. This could result in punctures to the cover. DO NOT use bleach or harsh abrasive products to clean the fabric cover. Cover is easily cleaned with mild soap and water.
WARRANTY:
This shelter carries a limited warranty against defects in workmanship.
ShelterLogic ® Group warrants to the Original Purchaser that if properly used
and installed, the product and all associated parts, are free from
manufacturer’s defects for a period of 1 YEAR FOR COVER FABRIC, END PANELS,
AND FRAMEWORK. Warranty period is determined by date of shipment from
ShelterLogic ® for factory direct purchases or date of purchase from an
authorized reseller, (please save a copy of your purchase receipt). If this
product or any associated parts are found to be defective or missing at the
time of receipt, ShelterLogic ® Group will repair or replace, at it’s option,
the defective parts at no charge to the original purchaser. Replacement parts
or repaired parts shall be covered for the remainder of the Original Limited
Warranty Period. All shipping costs will be the responsibility of the
customer. You must save the original packaging materials for shipment back. If
you purchased from a local dealer, all claims must have a copy of original
receipt. After purchase, please fill out and return warranty card for product
registration. Please see warranty card for more details. This warranty gives
you specific legal rights, and you may also have other rights which vary from
state to state / province to province. Covered by U.S. Patents and patents
pending: 6,871,614; 6,994,099; 7,296,584; D 430,306; D 415,571; D 414,564; D
409,310; D 415,572 05062020
ANCHOR GUIDE
ShelterLogic shelters, canopies and garages come with a basic “install” end
rib anchor kit to secure and square-up the frame during installation. In most
situations, additional anchors are recommended. ShelterLogic suggests one
anchor per leg.
SHEDS, GARAGES, GREENHOUSES, STORAGE SHELTERS
CANOPIES, POP-UP CANOPIES
RegisterShelterLogic.com/product-registion
https://l.ead.me/bbUhz3
www.ShelterkLogic.com
www.YouTube.com/ShelterLogic
150 Callender Road
Watertown, CT 06795
www.shelterlogic.com
1-800-524-9970
1-800-559-6175
Canada: 05_26019_10072_A1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>