GETT ASIA KPL-G20120 Xtra Series Keyboards User Manual
- June 12, 2024
- GETT ASIA
Table of Contents
GETT Asia Ltd.
KEYBOARDS
XTRA SERIES
KPL-G20120
SPECIAL FEATURES
- Medical and industry keyboard
- Scissor-switch design
- Integrated Clean mode for cleaning
- Integrated Touchpad
- Flat key profile
- Excellent tactile feeling
SPECIFICATION
| Number of keys: | 83 (US/EU-Layout) |
|---|---|
| Keyswitch technology: | Scissor mechanism |
| Switching cycles: | Approx. 5 mill. (per key) |
| Housing material: | Plastic |
| Housing color: | White & black |
| Protection level: | IP68 (Optional) |
| Interfaces: | 2.4Ghz wireless |
| Mouse active size: | 62 x 46 mm |
| Weight: | 580+/-10 g |
| Operating temperature: | 0°C ~ +40°C |
| Storage temperature: | -40°C ~ +55°C |
| Dimensions: | 364.4 (L) x 133.4 (W) x 25 (T) mm |
| Warranty: | 2 years |
| Certification: | EN60601-1-2 Ed4, CE, FCC-ID |
EN301489-1-17+EN300328
OPTIONAL:| Battery Cover nut M3
ORDER INFORMATION
Cat. No.| Touchpad| IP68| M3 Nut| 2.4Ghz|
Plastic| Color| Layout
---|---|---|---|---|---|---|---
KPL-G20121| √| | √| √| Plastic| Black| US/DE/JP/KR/FR
KPL-G10120| √| | | √| Silicone| White| US/DE/JP/KR/FR
KSI-G20121| √| √| √| √| Silicone| Black| US/DE/JP/KR/FR
KSI-G10121| √| √| √| √| Material| White| US/DE/JP/KR/FR
Other layouts, configurations and interfaces on request.
TECHNICAL DRAWING (IN MM)
EN60601-1-2 Ed 4
EN60601-1-2 Ed 4 applies to the basic safety and essential performance of
Medical Equipment (ME) equipment and ME systems in the presence of
electromagnetic disturbances and to electromagnetic disturbances emitted by ME
equipment and Me systems.
SHORT OPERATING INSTRUCTIONS
CLEAN MODE
Press Fn and F5 to enable clean mode. Clean mode is indicated by the three
Lock-LEDs flashing.
WIRELESS LEDS INDICATE
Press Fn, you can see the green Power-led on,
- If the status Num lock on, it means, the led on
- If the status Caps lock on, it means, the led on
- If the status Scroll lock on, it means, the led on power saving mode design
CLEANING INSTRUCTION
For further details please refer to below link: https://gett-group.com/en /gett-service/cleaning-and-material-resistances
Federal Communications Commission (FCC) Statement. This device complies with
part 15 of the FCC Rules. Operation is subject to the following twoconditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide Reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one ormore of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly
approved by GETT Asia Ltd. may void the FCC authorization to operate this
device.Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
RF exposure statement: This device complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. The device is installed and
operated without restriction.
Version 01
2023
GETT Gerätetechnik GmbH
Mittlerer Ring 1 08233 Treuen
Germany
Tel:+49 37468 660 0
E-Mail:info@gett-group.com
Internet:www.gett-group.com
GETT Asia Ltd.
Room 806-7, Kowloon Plaza
No. 485 Castle Peak Road
Kowloon, Hong Kong
Tel:+852 3461 9789
E-Mail: info@gett-asia.com
Internet:www.gett-asia.com
GETT Assembly (Asia) Co., Ltd.
4F & 5F, Building 1, No.97, Fuyong Area 107 Road
Baishixia Community, Fuyong Street Baoan District, Shenzhen, China
Tel: +86 755 2323 6358
E-Mail: info@gett-asia.com
Internet: www.gett-asia.com
gett-asia.com
gett-group.com
Documents / Resources
| GETT
ASIA KPL-G20120 Xtra Series
Keyboards
[pdf] User Manual
KG012, 2AMQ5-KG012, 2AMQ5KG012, KPL-G20120 Xtra Series Keyboards, KPL-G20120,
Xtra Series Keyboards, Keyboards
---|---
References
- GETT Asia - your keyboard manufacturer | GETT Asia
- Innovative Bedienlösungen von GETT Gerätetechnik
- Group Publishing
- GETT Asia - your keyboard manufacturer | GETT Asia
- Innovative Bedienlösungen von GETT Gerätetechnik
- Cleaning and Material Resistances
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>