Shanling M0 Pro Ultra Portable Music Player User Manual

: June 12, 2024
: SHANLING

Table of Contents

Security Instructions
Names of Parts
Operation Instructions
Firmware Update
Common Problems
Attached Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

M0 Pro Ultra Portable Music Player
User Manual Quick Start Guide

Security Instructions

Don’t repair disassemble or modify the device without permission.
Please don’t use this device in extremely hot, cold, dusty or humid circumstances. Avoid any exposure to liquids.
This device might get warm during charging.
Prevent device from falling, friction, or crashing against hard objects during use, otherwise surface scratch, battery disconnection, data loss or other hardware damages will be caused. Please also avoid violent vibration or impact.
Please enjoy the music in a proper volume to avoid impairing your hearing and damaging the sound system. Before plugging your headphones into the device, please firstly turn down the volume.
Don’t clean this device with chemicals or detergents, otherwise its surface and top coating may be damaged.
Don’t disconnect this device during formatting or transferring files. otherwise, a program error may occur.
The USB port is only for data transmission or charging. Please try to avoid using this device when it is charging.
When this device is not in use, please charge it regularly to guarantee battery life.
Please replace the battery only with ones of the same type as the original ones, as improper replacement will bring the risk of explosion.
Never expose battery to sunlight, fire or other extremely hot circumstances.
Please download update file from our official site https://en.shanling.com , and update accordingly to the instruction.

Names of Parts

Shanling M0 Pro Ultra Portable Music Player - Names of
Parts

Operation Instructions

Power ON / OFF / Screen Locking

Power on: press and hold power button for 2 seconds, then device turns on.
Power off: Press and hold power button for 2 seconds, then device power off.
Screen lock: while the device is powered on, short press power button to lock screen and turn off display. Press power button again to unlock device.

Volume Control
Turn the wheel clockwise to increase the volume, turn the wheel counterclockwise to decrease the volume.
Touch Screen Operation
User can control multiple functions by sliding, clicking or long pressing.
Click: Go to the next menu or confirm.
Right slide: Swipe right to return to the previous menu.
Long press: In any interface, long press to return to the main menu.
Charging
It is recommended to use DC5V 2A adapter for charging. The charging icon and the battery level will be displayed on the LCD display when the device is charging with the USB cable.
Micro SD Card Port

The port is only for the standard Micro SD card and supports a capacity up to 2TB.
Insert the Micro SD card into the card slot in the indicated direction and press it gently until it locks inside. Press again to remove the card.

Headphone Output Interface
The device uses special 3.5mm output. Normal single-ended headphones can be used directly. For Balanced headphones, a special adapter is needed.

USB Port

Data exchanging
a. After booting up the device and entering the “System” interface,select the “USB Mode” option and set to the “USB” status.
b. After connecting to a computer, user can start to manage songs on the TF card.
c. After disconnecting, go to”System” , choose ” Update” Music and click on “Update Music”. This will load all information about music files on TF card and will all files in “My Music” tab.
Digital audio signal transmission
a. After booting up the device and entering the interface, “System” select the “USB Mode” option and set to the “DAC” status.
b. Install the USB Driver on the computer before connecting player (Drivers only needed for Windows).
c. Make sure to set M0 Pro as the active sound device on your computer.

USB drivers download:

Visit download section on our official website to downloads the latest USB drivers for your device: en.shanling.com

Firmware Update

When updating the firmware, please make sure that device is fully charged.
Do not do operate the device during the update process.

Micro SD Card Update

Please download the firmware update from the Shanling official website. Copy the latest firmware file to the card, it must be placed into the root directory of the card.
In the “System”, select “System Update”. Update selection box will appear, press “Yes”, latest firmware will be update automatically.

Common Problems

It is recommended to use DC5V 2A adapter. Using the adapter with higher voltage may damage M0 Pro.
Unable to start M0 Pro, it may be caused by low power or exhausted battery, please recharge and then start up again.
If the device is not responsive, press down the power button for 10 seconds. This should force the device to shut down. Then power it on again.
If there is noise from headphones, headphone’s output interface may not be connected correctly, please try to insert it again.
When there is no sound, try to use different pair of headphones or different cable and make sure the system volume is set correctly.

Attached Accessories

Quick start guide: 1
Warranty card: 1
USB A to Type-C cable: 1
Front protective film: 1

| Shanling M0 Pro Ultra Portable Music Player - qr
code
---|---

<http://weixin.qq.com/r/f3RMVNrEsofNrZ439yFt>

|

<http://weibo.com/cnshanling>

Company: Shenzhen Shanling Digital Technology Development Co.,Ltd.
Address : No.10, Chiwan 1 Road, Shekou Nanshan District of Shenzhen City, China.

QQ Group: 667914815; 303983891; 554058348
Telephone: 400-630- 778
E-mail: info@shanling.com
Official Website: www.shanling.com
08 00-12 00; 13 30-17 30
Due to continuous improvement, every
specification and design is subject to
change at any time without further notice.