SHANLING EC3 CD Player User Guide

: May 15, 2024
: SHANLING

Table of Contents

SHANLING EC3 CD Player
Product Usage Instructions
Frequently Asked Questions
Safety Instructions
Safety Precautions
Laser Warning
Parts Name
Remote Control Diagram
Operating instructions
APP Control
Firmware Update
Specifications
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SHANLING EC3 CD Player

SHANLING-EC3-CD-Player-PRODUCT

Product Specifications

Model: EC3
Power Output: 15W
Dimensions: 188 x 255 x 68mm
Weight: 2.4kg

Product Usage Instructions

Safety Instructions

Do not repair, disassemble, or modify the device without permission.
Maintain a minimum clearance of 10cm at the back and sides, and 20cm at the top for ventilation.
Avoid water dripping or splashing into the player.
Avoid covering ventilation holes with materials that can block airflow.
Avoid exposing the player to open flame sources.
Connect the player to an AC power output socket with grounding protection.
Ensure the power plug and appliance coupler are easily operable as disconnecting devices.
Dispose of waste batteries according to local regulations.
Only use the player under 2000m elevation and non-tropical climate conditions.

Safety Precautions

Caution: Risk of electric shock. DO NOT OPEN. The sign with arrowed lightning inside an equilateral triangle warns the user that the player has high voltages inside which can cause electric shock. The sign with an exclamation mark inside an equilateral triangle warns the user that the player has important operation and maintenance instructions.

Laser Warning

Avoid opening the enclosure as the laser beam can damage the eye. Only a qualified technician should carry out repairs.
The player is classified as a Class 1 laser product and is identified as such on the label located on the rear of the enclosure.
The laser components can generate radiation above the Class 1 limit.

Frequently Asked Questions

Q: Can I use the EC3 CD player in tropical climates?

A: No, the EC3 CD player is only applicable for safe use under non-tropical climate conditions as specified in the safety instructions.

Q: How should I dispose of waste batteries from the EC3 CD player?

A: Waste batteries must be treated according to relevant local battery wasting regulations. Please refer to your local guidelines for proper disposal methods.

Q: What should I do if water accidentally drips into the player?

A: If water drips into the player, immediately disconnect it from the power source and allow it to dry completely before attempting to use it again. Contact customer support if needed.

Safety Instructions

Don’t repair, disassemble or modify the device without permission.
For good ventilation, a minimum of 10cm clearance shall be maintained at the back and both sides and 20cm at the top of the player.
Allow no water dripping or splashing into the player. Place no object containing liquid on the player, e. g. Vase.
Do not cover any ventilation hole with newspaper, cloth, curtain, etc. in case of ventilation blocking.
Allow no exposed flame source on the player, e.g. burning candle.
The player shall be connected to AC power output socket with grounding protection.
If power plug and appliance coupler are used as disconnecting device, the disconnecting device shall be easily operable.
The waste battery must be treated according to relevant local battery wasting regulations.
Only applicable for safe use in the area with elevation under 2000m. See Fig. 1 for the sign.
Only applicable for safe use under non-tropical climate conditions. See Fig. 2 for the sign. Fig. 1 Fig. 2

Safety Precautions

CAUTION

Caution: Risk of electric shock. DO NOT OPEN.
The sign with arrowed lightning inside an equilateral triangle warns the user that the player has high voltages inside which can cause electric shock.
The sign with an exclamation mark inside an equilateral triangle warns the user that the player has important operation and maintenance instructions.

Laser Warning

Since the laser beam in this player can damage the eye, please do not open the enclosure. Only a qualified technician should carry out repairs.
This player is classified as a Class 1 laser product, and is identified as such on the label located on the rear of the enclosure.
The laser components of this product can generate laser radiation above the Class 1 limit.

Parts Name

SHANLING-EC3-CD-Player-FIG-1

Remote Control Diagram

SHANLING-EC3-CD-Player-FIG-2

Note:

Use remote within 10m distance and less than 30 degree angle.
Some buttons on universal remote server no functions with EC3.

Operating instructions

Turn ON/OFF

Connect the power cord and signal cable of the player.
Put the power button on the rear side of the player into On position. Indicator on display should turn red/blue and then red.
Press down the volume wheel for 2 seconds. Indicator will turn blue and device power On.
Press down the volume wheel for 2 seconds. Indicator will turn red and device power off.
Put the power button on the rear side into OFF position to completely power off the player.

Select Input Source
Press [SOURCE] or buttons on machine or remote to cycle between CD, USB Drive and Bluetooth input.

Stop Playback

Press the button on the player or press button on the remote control to stop the playback.
When changing the disc, be sure to always stop the playback before removing the disc cover.

Pause Playback
Press the button on player or remote to pause playback. Press the button again to resume playback. Icon will be displayed while playback is paus

Previous Track
Press the button on player or remote. If the current track played for less than 3 seconds, it will switch to previous track. If the current track played for more than 5 seconds, it will jump to the beginning of the current track. Press the button again to switch to previous track.

Next Track
Press the button on player or remote to switch to the next track.

Rewind / Fast Forard
Long press the button to rewind or fast forward in the current track.

Menu Settting

Press in on the volume wheel to enter the System Settings menu.
Rotate the knob to move through menu.
Press the knob to confirm.
Press the button to return to previous menu.

USB Driver Playback

It’s recommended to use USB drivers formatted to FAT32.
Drives up to 2TB are supported.
Support up to PCM 384kHz and DSD256.
Supported formats: DSD、DXD、APE、FLAC、WAV、AIFF/AIF、DTS、MP3、WMA、AAC、OGG, ALAC、MP2、M4A、AC3、OPUS、TAK，CUE

Bluetooth Input

Switch the source / input to Bluetooth mode.
Open Bluetooth settings on your device and search for new devices.
Player will show up as “Shanling EC3”.
Pair it with your device and let it connect.

Repeat
If you want to play the current track repetitively, press [REP] button on remote control once. Display will show .
If you want to play the entire disc repetitively, press [REP] button on remote control again. Display will show .
To cancel repeat, press the button again. Display will show .

Random Playback

Press the button. Display will show .
Press the button to end random playback。

Screen On/Off
Press the [DIMMER] button on the remote to turn display On/Off.

Mute Playback

Press the [MUTE] button to mute playback. Display will show .
Press the [MUTE] button again to resume playback.

APP Control

Press the knob to enter the settings menu.
Go to Bluetooth settings and turn on Bluetooth.
Turn on the SyncLink function in the settings menu.
Insert USB drive and switch source to the USB Drive input.
On your phone, open Eddict player app, go to SyncLink function and turn on Client mode. Select “Shanling EC3” form list of available devices.
Click on “Scan Music” to scan for music files on the USB Drive.
Now you can control music playback on your EC3.

Firmware Update

Do not do operate the player during the update process.

Download the firmware update from Shanling official website. Copy the “update.bin” file to root/main directory of USB Drive.
Connect the USB Drive to the device. Press the knob to enter the settings menu. Go to “System Setting -System Update” and confirm to start the update process.