Led2 LIGHTING RAY Recessed Bathroom Lamp Installation Guide
- June 13, 2024
- Led2 LIGHTING
Table of Contents
Led2 LIGHTING RAY Recessed Bathroom Lamp
Product Information
- Product Name: RAY
- IP Rating: IP44
- Manufacturer: LED2
- Manufacturer’s Website: www.led2.eu
Product Usage Instructions
CAUTION! Turn off the main power before proceeding with the installation
in order to prevent possible shock.
The installation of the product should only be carried out by a technician or
a qualified person. If the lamp has a lampshade/diffuser, handle it carefully
as it is fragile. For products with an integrated LED light source, only a
technician or a qualified person can make the replacement.
PUSH DIM:
For 220-240V 50/60Hz power supply:
- Connect the L (Line) and N (Neutral) wires to the respective terminals on the driver.
- Connect the driver’s secondary side (~SEC) to the lamp.
- Connect the driver’s primary side (~PRI) to the power supply.
DALI/PUSH DIM:
For 220-240V 50/60Hz power supply:
- Connect the L (Line) and N (Neutral) wires to the respective terminals on the driver.
- Connect the DALI or PUSH DIM wires to the respective terminals on the driver.
- Connect the driver’s secondary side (~SEC) to the lamp.
- Connect the driver’s primary side (~PRI) to the power supply.
DALI DIM:
For 220-240V 50/60Hz power supply:
- Connect the L (Line) and N (Neutral) wires to the respective terminals on the driver.
- Connect the DA wires to the respective terminals on the driver.
- Connect the driver’s secondary side (~SEC) to the lamp.
- Connect the driver’s primary side (~PRI) to the power supply.
TRIAC DIM:
For 220-240V 50/60Hz power supply:
- Connect the L (Line) and N (Neutral) wires to the respective terminals on the driver.
- Connect the Phase cut Triac dimmer wires to the respective terminals on the driver.
- Connect the driver’s secondary side (~SEC) to the lamp.
- Connect the driver’s primary side (~PRI) to the power supply.
NOTE: The manufacturer is not responsible for the incorrect use and assembly of its products.
INSTALLATION
The installation may only be carried out by a technician.
This product contains a light source of energy efficiency class F.
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
CONNECTION – DIMMABLE VERSION – OPTIONAL
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.