Led2 LIGHTING KVADER LED Outdoor Wall Light Instruction Manual

June 13, 2024
Led2 LIGHTING

Led2 LIGHTING KVADER LED Outdoor Wall Light

Product Information

The product is called “KVADER”. It is an LED light fixture with different dimming options. The product is designed for indoor use and has an IP54 rating, indicating it is protected against dust and splashes of water.

The manufacturer’s website is www.led2.eu.

Installation and Safety Precautions

CAUTION!
Before proceeding with the installation, ensure that the main power is turned off to prevent possible electric shock. Installation should only be carried out by a technician or a qualified person. If the lamp has a lampshade or diffuser, handle it carefully as it is fragile. Replacement of the integrated LED light source should only be done by a technician or a qualified person. The manufacturer is not responsible for any incorrect use or assembly of the product.

Product Usage Instructions

The KVADER LED light fixture supports different dimming methods. Choose the appropriate method based on your requirements:

PUSH DIM
For PUSH DIM operation, connect the fixture to a 220-240V AC power source with a frequency of 50/60 Hz. Connect the Live (L) and Neutral (N) wires accordingly. The fixture requires a separate driver. Follow the wiring diagram provided in the manual to connect the driver correctly. The driver can be controlled using a push-button or switch.

DALI/PUSH DIM
For DALI/PUSH DIM operation, follow the same steps as PUSH DIM. However, this method requires a DALI-compatible driver. Connect the DALI control wires (DA/N DA/L) to the DALI interface on the driver.

DALI DIM
For DALI DIM operation, follow the same steps as DALI/PUSH DIM. This method also requires a DALI-compatible driver. Connect the Live (L) and Neutral (N) wires as before. Connect the DALI control wires (DA DA) to the DALI interface on the driver.

TRIAC DIM
For TRIAC DIM operation, follow the same steps as PUSH DIM. This method requires a phase cut Triac dimmer. Connect the Live (L) and Neutral (N) wires as before. Connect the dimmer to the driver using the appropriate connections based on whether it is trailing edge or leading edge.

CAUTION!
Remember to turn off the main power before performing any installation or wiring tasks to ensure safety.

Features

Installation

The installation may only be carried out by a technician. This product contains a light source of energy efficiency class G.

CAUTION!
Turn off the main power before proceeding with the installation in order to prevent possible shock. The installation may only be carried out by a technician or a qualified person. If the lamp has a lampshade/diffuser, handle it carefully as it is fragile. With an integrated LED light source, only a technician or a qualified person can make the replacement. The manufacturer is not responsible for the incorrect use and assembly of its products.

CONNECTION

CAUTION!
Turn off the main power before proceeding with the installation in order to prevent possible shock. The installation may only be carried out by a technician or a qualified person. If the lamp has a lampshade/diffuser, handle it carefully as it is fragile. With an integrated LED light source, only a technician or a qualified person can make the replacement. The manufacturer is not responsible for the incorrect use and assembly of its products.

www.led2.eu.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals