Dongguan YH313 GRBW Touch Controller User Manual
- June 13, 2024
- Dongguan
Table of Contents
User Manual
GRBW touch controller
FCCID:2A595-YH-313
LED Controller-2023
LotusLantern APP Manual
Software Overview
1.1 Overview
LotusLantern is a mobile APP to control LED strip by both Apple and Android
phones. The traditional control ways like infrared, 2.4GHz and others old
wired ways will be replaced by mobile phone control way with convenient,
powerful and scalable features. Through this mobile APP, you can not only
control the color, brightness and color temperature of the LED strips but also
set up all kinds of fancy flash mode; Also this APP can change the light of
the LED strip according to the rhythm of the music. This APP can set and
control several LED strips through Bluetooth and the operation is very simple,
easy to learn and easy to use.
1.2 Features
- Adjust color LED strips with 60,000 colors to change color and brightness and adjust monochrome LED stips to change brightness and color temperature
- Play music or turn on a sound playback device, you can let the light change the color and brightness with the rhythm of music, the music rhythm beautiful
- Inside multiple setting mode for color change and control LED strips without mobile
- Long distance control with omni-directional antenna, and many-to-many group control mode
- Once the connection is successful, connect automatically next time
1.3 Performance
LotusLantern APP is easy for use as well as great compatible for all kinds of
smart phones; After the actual test of hundreds of mobile phones verification,
the compatibility is above 95% of mobile phones in the market. APP is small
and convenient, it consumes less system resources, so the requirements of the
mobile configuration are low. Control delay is small, the operation feel good,
light control is smooth with people’ s visual sense.
Operating Environment
This APP program requires phones of system above Andriod 4.3 and iOS 8.0. Mobile phone configuration is not limited.
Instuctions Note:
Android version and iOS version download and use the same method, here in the
Android version as an example.
3.1 APP Download
Scan the QR code iOS and Android systems can download the “LotusLantem” APP by
scanning the QR code.
Open the browser or other tools with ‘Scan QR code function, scan the
-LotusLantern’ QR code as below
http://www.easytrack.net.cn/download/169
3.2 App Operation
- Click on the LotusLantern APP icon, enter the APP page:
- After entering the APP interface, if Bluetooth is not enabled, “Louts Lantern wants to turn on Bluetooth .” Click [Allow]
- Switch to color and brightness interface:
- Ckk to show the Lamp list, view lamp list:
- Click to RG8 manual adjustment view:
- switch to the mode interface:
- switch to the music rhythm interface:
- Switch to the microphone rhythm interface:
- Switch to the schedule interface:
- Switch to the modify pin sequence interface:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. The
device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>