Shenzhen UEMade Technology Co Ltd 2AAPS-BMS101 Bluetooth Speaker User Manual
- June 1, 2024
- Shenzhen UEMade Technology Co Ltd
Table of Contents
Bluetooth Speaker
User Manual
Specifications
| Bluetooth Version | V5.0 + EDR |
|---|---|
| Dimension | 6X6X5cm |
| Weight | 8.3 OZ |
| Working Range | – 33′ |
| Output Power | 3W |
| Frequency Response | 280Hz – 16kHz |
| Signal to Noise | -95db |
| Battery Capacity | 450 mHA |
Thank you for choosing our BT-Speaker stereo bluetooth speaker. Please carefully review the following instructions before operating the Unit.
Paring
- Recharge the speaker first or connect the speaker to a USB charging port if necessary
- Turn on the speaker.
- Activate the bluetooth connectivity on your device.
- Select “BT-Speaker” from the device list when your device completes bluetooth scanning
- Enter the code issued by your device (may not applicable for some devices)
- Paring complete
Basic Operation
- Press the play button ****to start, pause, and resume playing
- Short press the fast forward button ****to skip to the next title
- Short press the backward button **** to return to the previous titie
- Press the talk button **** to answer or disconnect a call
- Press and hold the fast forward button“ + “to increase the volume
- Press and hold the fast backward button‘ — “to decrease the volume
Optionally, you can use the included 3.5mm AUX cable to establish a wired connection with a music player or PC,
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC RF warning statement : the device has been evaluated to meet general
RF exposure requirement , The device can be used in portable exposure
condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>