FLIR E8 Thermal Imaging Camera User Guide

: June 13, 2024
: FLIR

Table of Contents

Illustrations
EN-US English
- Safety information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FLIR E8 Thermal Imaging Camera

FLIR E8 Thermal Imaging Camera

Illustrations

Note Explanations are provided in each language section.

Figure 1.1 View from the front

Illustrations

Figure 1.2 View from the rear

EN-US English

Safety information

Before operating the camera, you must read, understand, and follow the warnings, cautions, and notes in the user’s manual, chapter Safety information.
The user’s manual is available online, see section 2.3 Online documentation.

List of contents

Infrared camera with battery
Extra battery1
Battery charger1
Power supply
USB cable
Printed documentation
Hard transport case

Online documentation

Our manuals are continuously updated and published online.
To access the FLIR Ex series user’s manual and other product documentation, go to https://support.flir.com/resources/2758.

Notice to user

Register your product within 60 days to get extended warranty: https://support.flir.com/camreg.
FLIR Systems provides freeware and licensed software for image editing, video processing, thermal analysis, and reporting. Download at https://www.flir.com/support.
For training and certification courses, go to https://www.flir.com/support-center/training.
Contact our Technical Support Center if you experience problems or have any questions about your product: https://support.flir.com.

Declaration of conformity

The full text of the Declaration of conformity is available at the following internet address: https://support.flir.com/resources/2758.

Camera parts

See section 1 Illustrations, .

View from the front

Digital camera
Infrared lens
Trigger to save an image
Camera lamp
Lever to open and close the lens cap
Battery

View from the rear

Touch screen
Archive button
Navigation pad
Back button
On/Off button

Quick start guide

Charge the battery.
Push the battery into the camera battery compartment.
Push the On/Off button to power on the camera.
Follow the instructions on the camera screen to set up the camera according to your preferences.
You can also set up the camera to upload images for storage online. To enable upload of images, you need to connect the camera to the internet and pair the camera with a FLIR Ignite account. Use a computer or other device with internet access and follow the instructions on the camera screen.
Note You can select the settings as a part of the initial setup of the camera or later at any time via the Settings menu.
To measure a temperature, aim the camera toward the object. Make sure the spot meter is on the point of interest. The spot meter temperature is displayed on the screen.
To save an image, pull the trigger.

Disposal of electronic waste

This product should not be discarded as unsorted waste but must be sent to separate collection facilities for recovery and recycling.

Website
http://www.flir.com

Customer support
http://support.flir.com

Copyright
© 2023, FLIR Systems, Inc. All rights reserved worldwide.
Disclaimer
Specifications subject to change without further notice. Models and accessories subject to regional market considerations. License procedures may apply.
Products described herein may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions.

Distributed by:
Reduction Revolution Pty Ltd
www.reductionrevolution.com.au/FLIR

Publ. No.: T810623
Release: AA
Commit: 92002
Head: 92002
Language: mul
Modified: 2023-05-22
Formatted : 2023-05-22