FLIR SCION Thermal monocular User Guide

June 7, 2024
FLIR

FLIR SCION Thermal monocular User Guide

FLIR SCION Quick Start Guide

BATTERY INSTALLATION

  1. Open battery door by turning door latch 90 degrees
  2. Remove battery tray
  3. Install 2, 4, or 6 CR123 batteries in tray following proper polarity
  4. Install tray inside battery compartment
  5. Securely close battery compartment with screw latch

USB ACCESS

  1. Twist USB cover to expose port
  2. Connect USB connector to the port

CONTROL PANEL BUTTONS

ACCESS USER MANUAL

Product documentation and user manual are stored on the internal memory for your convenience. To access the user manual:

  1. Power unit ON
  2. Connect unit to PC or MAC via USB
  3. Browse to internal storage location
  4. Open desired user guide

CHANGING VIEW MODES

Short press MENU button to cycle through different view modes

  1. FULL mode
    – Minimal overlay for best situational awareness

  2. Picture-in-Picture (PiP)
    – 2x zoomed-in view of center area
    – Sample area size: 160 × 120 pixels
    – Display area size: 320 × 240 pixels

  3. Lock Span mode
    – Auto Gain Control (AGC) is locked at current level to view rich details even in low dynamic range scenes
    -Short press POWER button to lock and unlock AGC

ACCESSING INTERNAL MENU

LONG press of MENU button to launch internal menu

  1. Use UP / DOWN arrows to navigate menu
  2. SHORT press MENU button to select option
  3. SHORT press POWER button to exit

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals