drive Dartwood Label Maker User Manual
- June 3, 2024
- Drive
Table of Contents
Dartwood Label Maker
USER MANUAL
In the Box
1 portable
label maker
| 1 x mini USB
charging cable|
1 x roll of label stickers
(inside label maker)
Setup
- Open the top of the label maker. Push the tab on the top and lift up.
- Undo the roll of label stickers and pull the end out from the bottom of the roll.
- Close the top until it clicks. Make sure the end of the sticker roll is coming out through the slot.
- Turn the label maker ON. Press and hold the power button until the light turns green.
Note:
A green light indicates that the device is ON.
A red light indicates that the device has a problem.
A flashing red light indicates that the device has a low battery.
Connecting to the App
- Scan the QR code to download the Le Minyun App.
https://www.huonifou.com/app.html - Open the Le Minyun App. From the ‘Home’ page, select ‘Create Label’ or ‘Template’ to get started.
Start Printing
- After selecting ‘Create Label’, check your specifications and press ‘New’.
- Select ‘Text’ and draft your sticker content.
2a. When you are finished, select ‘Print’ at the bottom of the page.
Select “Text” and draft your sticker content. When you are finished select “Print” at the bottom of the page.
2b. Enable Bluetooth on your device.
On the ‘Print Setup’ page, press ‘Equipment model’.
Then, on the ‘My device’ page, select ‘L-series’.2c. Once connected to
your device, select ‘Print’ and check your printed label.
Choosing a Template
- Select the ‘Template’ option on the ‘Home’ page.
- Select your preferred template from the available options.
- After choosing your template, select ‘Edit’ to add your label content. Follow steps 3 – 5 in the above section.
Charging the Label Maker
To charge your label maker, plug the mini USB cable into the bottom and plug
the other end into a USB adapter/wall outlet.
Specifications
| Print speed: | 3.15 in / s (80 mm / s) |
|---|---|
| Printing method: | Thermal printing |
| Paper type: | Thermal roll paper |
| Sticker size: | 1.2 in x 0.5 in (30 mm x 12 mm) |
| Interface: | mini USB |
| Battery (standby): | 60 days |
| Battery (continuous): | 3 – 4 hours |
| Weight: | 0.55 lb |
Get More Support
Scan the QR code below or email us at contact@wasserstein-
home.com
https://qrco.de/bcN3bf
www.wasserstein-
home.com
Made in China
Documents / Resources
|
drive Dartwood Label
Maker
[pdf] User Manual
Dartwood Label Maker, Label Maker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>