BOWER USA USA BB-REF51 42 Inch Collapsible Light Reflector User Manual
- June 13, 2024
- BOWER USA
Table of Contents
USA USA BB-REF51 42 Inch Collapsible Light Reflector
User Manual
USA BB-REF51 42 Inch Collapsible Light Reflector
42″ COLLAPSIBLE LIGHT REFLECTOR
5-IN-1 KIT WITH COMPACT STORAGE CASE
STORING YOUR LIGHT REFLECTOR:
-
Hold the reflector on opposite sides with one hand facing up, and the other hand facing down
NOTE: To maximize product life, remove the slip cover before folding and placing into storage cas -
Twist the reflector so that it forms a figure-eight
IN THE BOX:
- Collapsible Light Reflector
- Removable 2-Sided Slip Cover
- Storage Case
FEATURES:
Continue twisting until the two sides pass in front of one another and they are stacked. Then insert the reflector into the storage case. Keep the case zipped when the reflector is inside.
HOW TO USE:
CAUTION! The light reflector opens quickly when twisting open, please hold
it away from your face.
- Remove the collapsed light reflector from the storage case
- Twist open the light reflector
- Hold the light reflector by the edges, away from your subject to achieve the results you want.
LIMITED One (1) Year Limited Warranty
S. Bower Inc.™ One (1) Year Limited Warranty: This warranty gives you specific
legal rights and you may have other rights which vary from state to state.
The S. Bower Inc.™ Limited Warranty is a voluntary manufacturer’s warranty
provided to the consumer. This warranty provides rights separate to rights
provided by consumer law, including but not limited to those relating to non-
conforming goods. S. Bower Inc.™ One-Year Limited Warranty benefits are in
addition to, and not instead of, rights provided by consumer law and it does
not exclude, limit or suspend a buyer’s rights arising from consumer law.
Consumers have the right to choose whether to claim service under the S. Bower
Inc.™ One-Year Limited Warranty or under their consumer law rights. The S.
Bower Inc.™ One-Year Limited Warranty terms and conditions shall not apply to
consumer law claims, contact your local consumer organization.
Please note: All claims made under the S. Bower Inc.™ One-Year Limited
Warranty will be governed by the terms set out in this warranty document. S.
Bower Inc.™ warrants to the product owner that this product will be free
against defects in materials and workmanship for a period of ONE (1) YEAR from
the date of original retail purchase when used in accordance with S. Bower
Inc.™ ’s user manual. Under this warranty, you will be able to send your
claims and defective product to S. Bower Inc.™, via freight prepaid, along
with proof of purchase, and will be repaired or replaced, based on S. Bower
Inc.™ sole discretion. Repair and/or replacement may be made with new or
refurbished product components at S. Bower Inc.™ sole discretion. This limited
warranty does not cover failures due to abuse, accidental damage or when
repairs have been made or attempted by anyone other than S. Bower Inc.™
personnel. A defective product meeting the warranty conditions set forth
herein will be replaced or repaired at no charge in either of two ways: The
first, which will result in exchanges only, is to return the product to the
retailer from whom it was purchased (provided that the store is a
participating retailer). Returns should be made within the time period of the
retailer’s policy for exchanges. Proof of purchase may be required. Please
check with the retailer for its specific return policy regarding time limits
for returns or exchanges. The second option is to send the product (prepaid
freight) to S. Bower Inc.™ corporate offices located at S. Bower Inc. 38-09
43rd Avenue 1st Floor Long Island City, NY 11101 for repair or replacement at
S. Bower Inc.™ ’s option. Proof of purchase is required. Include name, return
address, and issues that you are experiencing with S. Bower Inc.™ products.
All other guarantees, express or implied, are hereby disclaimed. This
warranty does not apply to products sold in countries sold out of the United
States.
ATTACHING THE 2-SIDED SLIP COVER:
NOTE: You can use the light reflector alone or with the 2-sided slip
cover.
- Unfold the 2-sided slip cover.
- Turn the cover inside out to choose between the different colored surfaces.
- Place the light reflector into the slip cover, passing the handle through the hole in the slip cover
- Hold the handle in place while you zip up the slip cover.
©2023 S. Bower, Inc. All rights reserved.
All brand names and trademarks belong to their respective owners
S. Bower, Inc. LIC, NY 11101 www.BowerUSA.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>