Dorel DA9027109CL Bathroom Vanity Instruction Manual
- June 1, 2024
- DOREL
Table of Contents
Dorel DA9027109CL Bathroom Vanity
Specifications
- Product Name: Bathroom Vanity
- Size: 24 inches
- Weight Limit: 25 lb / 11.34 kg for countertop, 20 lb / 9.1 kg for storage
- Models Available: DA9027109CL (White), DA9027309CL (Gray), DA9027909CL (Navy)
Read Before Beginning Assembly
This product is packaged in 1 carton and assembly time is estimated at 30
minutes. Do NOT use powertools for assembly.
Step 1: Vanity Installation
- Place the vanity in the desired location, ensuring it is level. Shim legs if necessary.
- Locate wall studs and secure the vanity to the wall using wood screws (not provided).
- Install the faucet and all plumbing, checking for water leaks.
Step 2: Backsplash Attachment
Apply silicone to the bottom edge of the backsplash and secure it to the
vanity. Wipe away excess silicone immediately.
Note: Allow 24 hours for the silicone to fully dry before exposing it to water or cleaning products.
Weight Limit: 25 lb / 11.34 k g for countertop 20 lb / 9.1 kg for storage
DA9027109CL (White), DA9027309CL (Gray), DA9027909CL (Navy),
Bathroom Vanity
Thank you for purchasing from Dorel!
Questions, concerns, missing parts?
CONTACT OUR CUSTOMER SERVICE DEPARTMENT BEFORE RETURNING PRODUCT TO THE
RETAILER.
If parts are missing or damaged, we will gladly ship your replacement parts
free of charge.
Visit www.dhpfurniture.com/eng/replacement-
parts] or call Toll-Free
1-800-267-1739.
You can also chat with us at
www.dhpfurniture.com
Date of Purchase
Lot Number (TAKEN FROM CARTON)
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Limited 1 year Warranty
Dorel warrants this product to be free from defects in material and
workmanship and agrees to remedy any such defect. This warranty covers one
year from the date of original purchase from authorized retailers. This is
solely limited to the repair or replacement of defective parts and assembly
labor is not included.
This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired
in any way.The warranty does not cover wearing, tearing, fading or splitting
of the fabric (where applicable). Liability for consequential damages is
excluded to the extent exclusion is permitted by law. This warranty gives you
specific legal rights and you may also have other rights which vary from state
to state or province to province.
To obtain warranty service, purchaser must present original bill of sale.
Components repaired or replaced are warranted through the remainder of the
original warranty period only. The defective components will be repaired or
replaced without charge, subject to the terms and conditions described above.
Visit www.dhpfurniture.com to view the limited
warranty valid in the U.S. and Canada.
Contact Us!
For help with assembly, identifying parts, product information or to order
parts, please contact us:
- www.dhpfurniture.com
- cs@dhpfurniture.com
- 1-800-267-1739
- Monday to Friday| am to 9 pm (EasternTime)
- 10am to 6:30 pm (EasternTime)
- 11am to 7 pm (EasternTime)
- DHPConsumer
- Services12345AlbertHudon,Suite100,
- Montreal,QuebecH1G3L1
Read Before Beginning Assembly
- Work in a spacious area and near where the unit will be used, preferably on a carpet, or use a piece of the cardboard packaging to protect your floor and product.
- Make sure all parts are included. Most parts are labeled or stamped on the raw
- edge.
- Read each step carefully. It is very important that each step of the instructions is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur.
- This product may contain small components. Please ensure that they are kept away from small children.
- This product is designed for home use and is not intended for commercial use.
TOP VIEW
BACK VIEW
PARTS
DIMENSIONS: MILIMETERS [INCHES]
PART NUMBERS
PART NUMBERS
PART LABELS| DA9027109CL
(White)
| DA9027309CL
(Gray)
| DA9027909CL
(Navy)
A| T712500| T712520| T712530
B| T712510| T712510| T712510
Each part has a unique part number. Please reference the appropriate part
number when contacting customer service for replacement parts.
Before throwing any packaging, please verify all contents and make sure you
have received all the parts listed above!
- Step 1
- Place the vanity in the desired location. Ensure the vanity is level. Shim legs, if necessary.
- Locate the wooden studs in the wall and secure the vanity to the wall using wood screws (not provided).
- Install the faucet and all plumbing. Make sure there are no water leaks.
Make sure to apply the silicone to the rough edge of B and that the smooth side is facing forward.
-
Step 2
Apply a line of silicone to the bottom edge of the backsplash B and secure it to the vanity A.
Wipe away any excess silicone immediately.
NOTE: Allow 24 hours for the silicone to fully dry before exposing it to water or to cleaning products. -
Step 3
The door alignment was set at the factory, but it might have shifted during transport. Floors can also be uneven, causing doors to be misaligned. If needed, adjust the hinges as shown.
CAUTION: This unit is intended for use only with the products and/or
maximum weights indicated. Use with other products and/or products heavier
than the maximum weights indicated may result in instability or cause possible
injury.
Do NOT stand or sit on this furniture.
Weight Limit:
25 lb / 11.34 k g for countertop
20 lb / 9.1 kg for storage
That’s it! You’ve finished assembling your Bathroom Vanity!
Helpful Hints
- Ensure all building & plumbing codes are respected. We strongly advise the use of a licensed plumber to install the faucet and plumbing.
- Make sure that the vanity is installed on a level floor. Unevenness can cause the vanity to be misaligned, resulting in twisting of the cabinet. Repair any uneven areas with shims.
- Move your new furniture carefully, with two people lifting and carrying the unit to its new location.
- Dust this item regularly with a soft, lint-free cloth to prevent soil build up. A damp cloth may be used occasionally to clean the surfaces. Dry immediately. Do not use any abrasives that might damage the finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wooden furniture.
- Use coasters to prevent the formation of moisture rings and trivets to protect from hot items.
- The engineered stone top is resilient, but care needs to be taken to preserve its appearance. Do not place hot appliances, such as curling irons and hot hair dryers directly on the counter top. Wipe spills immediately. For tougher stains, use a non-abrasive Granite/Stone cleaner.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>