JBC RHN-A Articulated Hand Rest For Phnek Preheater Set Instruction Manual
- June 13, 2024
- JBC
Table of Contents
JBC RHN-A Articulated Hand Rest For Phnek Preheater Set Instruction Manual
This manual corresponds to the following reference: RHN-A
Packing List
The following items are included:
Features
Assembly
Setting up the Hand Rest Arm
Fit the shaft into the base bushing (1) and tighten the headless
screw (2). Then assemble first the height adjustment flange (3) and finally
the hand rest arm (4) onto the shaft.
The hand rest arm position should be as shown in the image. The right hand rest is marked at its bottom side with the letter “R”.
Height Adjustment
According to your work needs the hand rest arm allows adjustment for different
heights through the vertical axis.
Slide the arm to the appropriate height (1) and secure it by tightening the
knob (2) to guarantee stability.
Work Position Adjustment
RHN arm allows adjustment for different positions according to your work needs. The articulated arm covers all work areas.
Preheater Positioning
RHN has been designed to work together with PHN Fit PHNE onto the positioning bolts (1) for proper alignment. The four corner guides (2) help to place the heater unit in its position.
Accessories*
If a second hand rest ist needed, Articulated Left Hand Rest HRL is available. HRL also allows adjustment for different positions.
Compatible JBC Articles*
HRR and HRL can be combined with:
RWT Adjustable Rework Arm,
RWS Adjustable Rework Arm for PHSE and
RWB Adjustable Rework Arm for PHBE.
Assemble first the height adjustment flange (1), then the HRR (2) and afterward the HRL (3). Assemble the second height adjustment flange (4) and finally the RWT (5).
Maintenance
– Check periodically that RHN is clean, especially the sliding parts and the
shaft.
– Use a damp cloth when cleaning. Alcohol can only be used to clean the metal
parts.
– Replace any defective damaged parts. Use original JBC spare parts only.
⚠ Do not leave up HRR over the preheater when the preheater is working.
Safety
⚠ It is imperative to follow safety guidelines to prevent electric shock,
injury, fire or explosions.
– Do not use the equipment for any purpose other than PCB rework.
– The temperature of accessible surfaces may remain high after the unit is
turned off. Handle with care.
– Be careful with the fumes produced when soldering.
– Keep your workplace clean and tidy. Wear appropriate protection glasses and
gloves when working to avoid personal harm.
– Do not leave up the arms directly above heat surfaces.
– Utmost care must be taken with liquid tin waste which can cause burns.
– This appliance can be used by children over the age of eight as well as
persons with reduced physical, sensory or mental capabilities or lacking
experience provided that they have been given adequate supervision or
instruction concerning the use of the appliance and understand the hazards
involved. Children must not play with the appliance.
– Maintenance must not be carried out by children unless supervised.
Notes
Specifications
RHN Articulated Hand Rest for PHNEK Preheater Set Ref.: RHN-A
– Base Dimensions: 310 x 239 mm / 12.20 x 9.41 in
– Total Height: 205 mm / 8.07 in
– Arm Heigth: 200 mm / 7.87 in
– Arm Lenght: 498 mm / 19.61 in
– ESD Connector
– Total Net Weight: 4.50 kg / 9.92 lb
– Package Dimension / Weight: 370 x 204 x 370 mm / 6.09 kg
(L x W x H) 14.57 x 8.03 x 14.57 in / 13.43 lb
Complies with CE standards ESD Safe
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour. Warranty does not
cover product wear or misuse. In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer where it was purchased.
This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>