MACA STONE Nature Stone Veneers Translucent Stone Veneer Instruction Manual

MACA STONE Nature Stone Veneers Translucent Stone Veneer

Product Information

Specifications

• Lightbox LED Strips/Sheets
• Tempered Glass/Acrylic
• Clear Construction
• Adhesive: MACA Translucent Stone Veneer

Product Usage Instructions

Lightbox Setup

1. Install the LED lighting on the substrate or the base of the lightbox to provide illumination. Skip this step if using natural light.
2. Properly connect the LEDs to ensure functionality with the power source.
3. Install the base layer on the lightbox. 

Base Layer Installation: As our translucent natural stone veneer is lightweight and flexible, a base layer is needed. Acrylic, plexiglass, lexan sheet, or tempered glass can be used.

Lightbox Installation Materials

Note: MACA STONE does not provide these items.

• Lightbox/wall
• Led
• Base layer
• Power

FAQ

• Q: What materials can be used as a base layer for the lightbox?
  A: The base layer can be acrylic, plexiglass, lexan sheet, or tempered glass.

• Q: Can I skip installing LED lighting and use natural light instead?
  A: Yes, you can skip installing LED lighting if you prefer to use natural light as the light source.

LIGHTBOX INSTALLATION RECOMMENDATIONS

MACA translucent stone veneer is elegantly designed to be translucent, artfully allowing light to filter through, creating a captivating ambience. To achieve this effect, our product must be applied to a base layer of acrylic, plexiglass, lexan sheet, or tempered glass.
Please note: We do not provide materials or installation services for the lightbox.

Lightbox Setup

Install the LED lighting on the substrate or the base of the lightbox to provide illumination. (You can skip this step if you prefer to use natural light as the light source.)

LED Selection Guidelines:

• Standard LED emits focused, bright light, ideal for highlighting details but may cause glare.
• Diffuse LED Lighting provides a softer, uniform glow, perfect for gentle overall illumination on translucent stone veneer.
• A recommended approach for achieving a flexible and adjustable lighting effect is to use an adjustable LED.

Properly connect the LEDs to ensure their functionality with the power source.

Light Source Distance Recommendations:
The distance between the light source and the base layer is crucial for optimal lighting effect.

• For Standard LED: Maintain a minimum 6″ distance.
• For Diffuse LED Lighting: At least 2″ based on light output.

Install the base layer on the lightbox.

Base Layer Installation:
As our translucent natural stone veneer is lightweight and flexible, a base layer is needed. You can use acrylic, plexiglass, lexan sheet, or tempered glass as the base layer.

Lightbox Installation Materials

Note : MACA STONE does not provide these items

Unboxing Preparation
Take the products out of the box and place them flat in a safe area. Some flaking on the stone surface is normal during unboxing and installation. For the best outcome, do a layout test before installing. This test helps figure out where each stone sheet fits best, so you can make any needed adjustments. *If the products are coming rolled up, placing them under direct sunlight for a few hours before unrolling will expedite the flattening process. (Alternatively, a heat gun may be needed.)

Measurement and Marking
Measure the desired size on the veneers and mark where you need to make cuts.

Cutting with Precision
Use a circular saw or track saw to cut the sheets to your desired dimensions.

Surface Preparation
Ensure the base layer where you intend to apply MACA translucent stone veneers is clean. Remove dust and ensure there are no significant bumps on the surface.

Adhesive Application
Apply clear construction adhesive to the back ofthe veneers or the base layer’s surfaces. For a uniform bond, applying the adhesive using the back buttering technique is advised.

Enhancing Adhesion
Use a pressure roller to enhance the adhesion of the translucent stone veneersto the base layer.

Curing Time
Allow it to cure for up to 24 hours; it may take longer, depending on the adhesive used and the temperature of the installation environment.

Installation Complete
Installation of translucent stone veneers is finished, offering your space a natural, luminous effect. Enjoy the interplay of light and natural stone in your environment!

Translucent Stone Veneers Installation Tools

• Saw Use a circular saw or track saw for cutting.
• Adhesive Use clear construction adhesive. Rec.: Soudal®-Fix ALL Crystal Clear Bonding Sealant
• Others Measurement tools, Pen/pencil, and Pressure roller.

LED COLOR GUIDELINES

Translucent Stone Panel Effects: Lighting Comparison

Warm Light : 2,700K

Bright White: 4,000K

Daylight: 6,000K

www.macastonedecor.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>