MACA STONE Translucent Stone Veneer User Manual
- June 2, 2024
- MACA STONE
Table of Contents
- MACA STONE Translucent Stone Veneer
- Product Specifications
- Product Usage Instructions
- Frequently Asked Questions (FAQ)
- LIGHTBOX INSTALLATION RECOMMENDATIONS
- Lightbox Setup
- Lightbox Installation Materials
- MACA TRANSLUCENT STONE VENEER INSTALLATION RECOMMENDATIONS (STEP B)
- Translucent Stone Veneers Installation Tools
- LED COLOR Guidelines
- Translucent Stone Panel Effects: Lighting Comparison
- Documents / Resources
MACA STONE Translucent Stone Veneer
Product Specifications
- Product: Lightbox LED Strips/Sheets
- Construction: Tempered Glass/Acrylic with Clear Construction
- Material: MACA Translucent Stone Veneer
- Lighting Options: Standard LED, Diffuse LED Lighting, Adjustable LED
Product Usage Instructions
Lightbox Setup
- Install the LED lighting:
- If using artificial light, install LED lighting on the substrate or base of the lightbox for illumination.
- If using natural sunlight, skip this step.
- LED Selection Guidelines:
- Standard LED: Focused, bright light for highlighting details (may cause glare).
- Diffuse LED Lighting: Softer, uniform glow for gentle overall illumination on translucent stone veneer.
- Adjustable LED: Recommended for flexible and adjustable lighting effects.
- Properly connect the LEDs to the power source to ensure functionality.
- Light Source Distance Recommendations:
- For Standard LED: Maintain a minimum 6 inches distance from the base layer.
- For Diffuse LED Lighting: Keep at least 2 inches based on light output.
- Install the base layer:
Use tempered glass or acrylic as the base layer for non-curved and curved applications due to the lightweight and flexible nature of the translucent stone veneer.
Frequently Asked Questions (FAQ)
-
Does MACA STONE provide installation services for the lightbox?
No, MACA STONE does not provide materials or installation services for the lightbox. Users need to source the required items independently. -
What is the recommended base layer for the translucent stone veneer?
Tempered glass and acrylic are recommended for both non-curved and curved applications due to their compatibility with the lightweight and flexible nature of the stone veneer.
LIGHTBOX INSTALLATION RECOMMENDATIONS
(STEP A)
Our unique stone veneer is thin enough to emit a beautiful, natural glow, making it excellent for use in lightboxes as shown above. To achieve this effect, our product must be applied to a base layer of tempered glass or acrylic.
Lightbox Setup
-
Install the LED lighting on the substrate or the base of the lightbox to provide illumination. (You can skip this step if you prefer to use natural sunlight as the light source.)
LED Selection Guidelines:- Standard LED emits focused, bright light, ideal for highlighting details but may cause glare.
- Diffuse LED Lighting provides a softer, uniform glow, perfect for gentle overall illumination on translucent stone veneer.
- A recommended approach for achieving a flexible and adjustable lighting effect is to use an adjustable LED.
-
Properly connect the LEDs to ensure their functionality with the power source.
Light Source Distance Recommendations:
The distance between the light source and the base layer is crucial for optimal lighting effect.- For Standard LED: Maintain a minimum 6″ distance.
- For Diffuse LED Lighting: At least 2″ based on light output.
-
Install the base layer on the lightbox.
Base Layer Installation:
As our translucent natural stone veneer is lightweight and flexible, a base layer is needed. Tempered glass and acrylic are recommended for both non- curved and curved applications.
Lightbox Installation Materials
Note: MACA STONE does not provide these items
MACA TRANSLUCENT STONE VENEER INSTALLATION RECOMMENDATIONS (STEP B)
- Unboxing Preparation
Take the products out of the box and place them flat on the safe area. Some flaking on the stone surface is normal during unboxing and installation. Remember, our natural translucent stone products can vary in color and pattern between pieces. For the best outcome, do a layout test before installing. This test helps figure out where each stone sheet fits best, so you can make any needed adjustments.
-
Measurement and Marking
Measure the desired size on the veneers and mark where you need to make cuts. -
Cutting with Precision
Use a circular saw or track saw to cut the sheets to your desired dimensions. -
Surface Preparation
Ensure the base layer where you intend to apply MACA translucent stone veneers is clean. Remove dust and ensure there are no significant bumps on the surface. -
Adhesive Application
Apply clear construction adhesive to the back of the veneers or the base layer’s surfaces.For a uniform bond, applying the adhesive using the back buttering technique is advised. -
Enhancing Adhesion
Use a pressure roller to enhance the adhesion of the translucent stone veneers to the base layer. -
Curing Time
Allow it to cure for up to 24 hours; it may take longer, depending on the adhesive used and the temperature of the installation environment -
Installation Complete
Installation of translucent stone veneers is finished, offering your space a natural, luminous effect. Enjoy the interplay of light and natural stone in your environment!
Translucent Stone Veneers Installation Tools
- Saw Use a circular saw or track saw for cutting.
- Adhesive Use clear construction adhesive.
- Others Measure tool, Pen/pencil, Pressure roller.
LED COLOR Guidelines
Translucent Stone Panel Effects: Lighting Comparison
Warm Light: 2,700K
Bright White: 4,000K
Daylight: 6,000K
Documents / Resources
| MACA
STONE Translucent Stone
Veneer
[pdf] User Manual
Translucent Stone Veneer, Translucent, Stone Veneer, Veneer
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>