Yuki CS43198 USB DAC with Headphone Amplifier User Manual
- June 13, 2024
- Yuki
Table of Contents
USB DAC with Headphone Amp
User Manual
Preface
Dear Customer,
Thanks for purchasing the Yuki and congratulations on choosing this high-
quality portable DAC with headphone amp. We sincerely hope the brand new Yuki
will bring you excellent Hi-Fi experience.
Please read this manual carefully before using the device.
Yuki at a Glance
Introduction
Yuki, equipped with dual CS43198 DAC chip, has the innovative dual-layer
structure that separates the digital circuit and the analog headphone amp
circuit.
The 4-way balanced headphone amp circuit has 4x 4 transistors to drive the
output. It is a unique “dongle” that purely focuses on sound.
Specifications
USB Input:
Max bit depth: 32bit
Max sampling rate: 768k
Max OSD rate (native): DSD256
Headphone Amp Output:
Output level: 2Vrms@3.5mm
4¥rms@4.4mm
THD+N: 0.00028%
SNR: -117dB
Noise floor:3.47uVrms
Frequency response (20Hz~40kHz) : +0.5dB:
Dimensions: 53.5*24°13mm
Weight: 230g
Accessories: Type-C to Type-C cable, quick start guide
Operations
To Connect with a Smartphone or a Portable Device with USB Output
- Connect the Yuki and a smartphone/Pad/DAP via USB.
- Plug a pair of headphones into the Yuki’’s corresponding output (4.4mm/3.5mm).
- Play music on the connected smartphone/Pad/DAP (for some models, you may need to enable OTG manually}.
* Connections with different devices
need different cables. If you need help, please contact your dealer or
sales@auneaudio.com
- Do not plug in two pairs of headphones.
To Connect with a Computer/Laptop
- For Windows OS, a driver is needed. Please go to: www.auneaudio.com — English >Service & Support > Downloads —> Yuki and download the driver.
Apple’s macOS doesn’t need a driver.
- Connect the Yuki and a computer/laptop via USB.
- Plug a pair of headphones into the Yuki’s corresponding output (4.4mm/3.5mm).
- Play music on the connected computer/laptop (for some music player software, you may need to set the output device; for foobar2000 settings to play DSD, please refer to the guide to driver installation and settings)
To Connect with a UAC1.0 device (such as Switch)
By default, the Yuki works in UAC2.0 mode. For a UAC1.0 device (such as
Switch), please hold down VOLUME+ of the Yuki and don’t let go until the two
devices are connected by cable and the Yuki is powered on. Then it’ll work in
UAC1.0 mode.
aune | 430034 WUHAN | CHINA
Email: sales@auneaudio.com | Fax:
+86-27-85840435 | www.auneaudio.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>