HITLIGHTS B0BQKXR5FF DimTech Smart Dimmer Switch for LED Lights Instruction Manual

HITLIGHTS B0BQKXR5FF DimTech Smart Dimmer Switch for LED Lights

Wall Switch Installation

Wall Box

1. A standard single-gang wall box sized 3 x 2 x 2 ½ cm will service Dimmer
2. Not compatible with multi or double Mud Rings.
3. When using a retrofit gang box (cut-in box) you might need to recess the ears

Maximum Load

• Input Voltage: Max Load
• 120VAC: 700W

Note: A maximum of Drivers can be controlled with each Wall Switch

Before You Begin

• To avoid fire, shock, or death, turn the power Off at the circuit breaker and test to ensure the power is Off before wiring.

Step 1: Prepare Wall Box Wires

1. Make sure that the ends of the wires from the wall box are straight (cut if needed).
2. Strip the wire insulator for each wire inside the wall box as shown here:

Step 2: Wire Wall Switch

• Connect wires according to the wiring diagram below.

Wiring Description (Using wire connectors)

1. Connect the green (or bare copper) wire from the wall box to the green Wall Switch wire.
2. Connect the line/hot wire from the wall box to the black Wall Switch wire.
3. Connect the black LED Driver wire to the red Wall Switch wire.
4. Connect the white wire from the wall box to the white LED Driver wire and the white Wall Switch wire.

Step 3: Mount the Wall Switch

• Mount the Wall Switch into the wall box using the screws provided.

Step 4: Restore Power

1. Turn the power On at the circuit breaker.
2. Verify 120V with a Voltmeter

Installation Instructions

Item Identification

Pairing

If you are installing more than one Wall Switch unit, all others must be switched Off while pairing.

1. Make sure both sliders are set to the top and the Wa 11 Switch is switched Off.
2. Switch the power On at the circuit breaker.
3. Turn On the Wall Switch, the green LED Indicator will blink while pairing.
4. After up to 15 seconds, your LED fixture will be paired with the Wall Switch.
5. To verify pairing is successful, move the sliders and ensure that the LEDs respond accordingly.
6. If you’re installing a smart wall switch Scan the QR code to download the app. Follow the instructions to connect to the SmartAir App.

If pairing is not successful press the Wall Switch pairing/ reset button.

Connect to the SmartAir App

• Scan the QR code to download the App. Follow the instructions to connect to the SmartAir App

Operation – Dimmer Wall Switch

Customer Assistance

For technical questions regarding the installation or operation of this product, please contact our customer support team:

• 1-855-768-4135
• customerservice@hitlights.com.

Caution
To reduce the risk of overheating and possible damage to other equipment, do not install to control a receptacle, A motor-operated appliance, or a transformer-supplied appliance.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Pairing button again
Wall Switch LED In dictator r steady RED| The Wall Switch is trying to perform a pairing| Turn On the

Wall Sw it ch until paring is completed

Lights do not respond to Wall Switch| The Breaker is Off or tripped| Turn the power On at the Circuit breaker
Im proper pairing| Perform “Pairing”
Improper wiring| Make sure all wires are   connected according to the wiring diagram
Sh o rt circuit at the LED Driver output| Check LED Driver output  for short circuits

The wall switch is controlling

the wrong lights (Only if multiple

Wall Switches units are installed in the same location)

| ****

The Wall switch was paired with the

w rong LED Driver

| ****

Perform “Pairing”. Make sure all the other e Wall Sw it c hes are turned Off while pairing

Wall Switch / LED Driver Rep la cem ent| Any reason| Perform “Pairing”. Make sure all the ot he Wall Sw it c h es are turned Off while

Paiing

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>