Schneider Electric Linergy BS LVS04668 PrismaSeT Switchboards Instruction Manual
- June 13, 2024
- Schneider Electric
Table of Contents
Linergy BS
LVS04668 / LVS04678
Linergy BS LVS04668 PrismaSeT Switchboards
PLEASE NOTE
Electrical equipment should be installed, operated, serviced, and maintained
only by qualified personnel. No responsibility is assumed by Schneider
Electric for any consequences arising out of the use of this material.
PrismaSeT switchboards equipped with the Linergy busbar connection system and
Schneider Electric switchgear are subject to IEC 61439-1 & 2 certification.
The instructions in this document describe how to fit Linergy in a PrismaSeT
switchboard.
The installer is fully liable if it is fitted in any other switchboard.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Linergy Evolution or copper busbars must be mounted using supports, references
LVS04668 and LVS04678, in accordance with the instructions given in this
document.
Failure to follow these instructions will result in death or serious injury.
Schneider Electric Industries SAS
35, rue Joseph Monier
92500 Rueil-Malmaison
France
www.se.com
04696378AF-00
As standards, specifications and designs change from time to time, please ask
for confirmation of the information given in this publication.
Publication : Schneider Electric
Impression : 105 x 297 mm
**** This document has been printed on ecological paper.
Schneider Electric Limited
Stafford Park 5
Telford, TF3 3BL
United Kingdom
www.se.com/uk
© 2022 Schneider Electric
All rights reserved.
Documents / Resources
|
Schneider Electric Linergy BS LVS04668 PrismaSeT
Switchboards
[pdf] Instruction Manual
LVS04668, LVS04678, LVS08961, Linergy BS LVS04668, Linergy BS LVS04668
PrismaSeT Switchboards, PrismaSeT Switchboards, Switchboards
---|---