ELECTCOM PRO DVD3621 DVD Players User Manual

ELECTCOM PRO DVD3621 DVD Players

Front Panel

1. USB PORT: Plug in USB
2. OPEN/CLOSE BUTTON: Open/close tray
3. PLAY/PAUSE BUTTON: Play start/play pause
4. STOP BUTTON: Return to the beginning of playback
5. POWER: Power on/off
6. LED DISPLAY: Displays the playing time

Rear Panel

1. COMPONENT VIDEO(Y.Pb/Cb. Pr/Cr) OUTPUT:
2. Video signal output interface
3. HDMI DIGITAL OUTPUT: HD Video signal output interface L/R CHANNEL OUTPUT: Audio output interface
4. VIDEO OUTPUT: Video output interface

Using the Remote Control

Remote control operation

• Insert the batteries into the battery compartment. Point the remote at the remote sensor in front if the player. Make sure that there are no obstacles in the way between the remote and the player.
• Take the batteries out of the remote control if it is not going to be used for a long time.

Connecting the DVD Player

Video system connection

Composite Video
Use the AV cable (yellow terminal) to connect the composite video output of this unit to the TV/monitor video input.

Component Video
Use a 3-core AV cable to connect the component output terminals of this unit to the corresponding TV/monitor input.

HDMI Output
Use an HDMI cable to connect the HDMI output to the HDMI input terminal.

Note!

• Which connection to use depends on the TV/monitor input terminal.
• Do not use all the connections at one time, otherwise, the picture will be affected.
• Only the physical connection conforms to the video setting and can produce the normal picture. (Please refer to the Video Setup in System Setup)

Audio connection system

Stereo Audio
Use a pair of AV cables (red for the right/white for the left) to connect the stereo audio output of this unit to the TV if you want to have sound from the TV.

Note!

• The physical connection should match with audio output setup of this unit. Please refer to Audio Setup in System Setup.

Setting the DVD Player

Basic Operation

Press the remote control unit to set up the initial setting, and select related[SETUP PAGE] with the directional buttons.

Menu Operations
You can set up the mode of audio and video output, initial setup, parental control level, etc. You can also select the aspect ratio of the playback picture to your TV screen. Pres display the setup menu and the system will automatically stop play.

System Setup

Press  and select system setup page.

• TV SYSTEM: Use ▲ ▼ arrow buttons to make TV system selection. There are four TV output systems to choose from: NTSC, PAL, PAL-M and AUTO.
• HD OUTPUT : Use ▲ ▼ arrow buttons to set video resolution, there are three resolution(720P, 1080I, 1080P).
• VIDEO: There are different video output modes to choose from:
• INTERLACE-YUV : Use Y Cb Cr terminals to output signals.
• P-SCAN YPBPR : Use Y Cb Cr terminals to output signals and convert to progressive output.
• TV TYPE: Using arrow button to select TV aspect ratio.

4:3/PS
Pan & Scan video output for a normal TV set. The screen displays the wide picture on the wide screen with a left and right portion automatically cut Off.

4:3/LB
Letter Box video output for a normal TV set. The screen displays the wide picture with bands displayed on the upper and lower portions of the Screen.

16:9
Wide screen video output for a wide-screen TV set.

PASSWORD
The initial setting of this item is under locked status. You can not set the rating and also can not change the password. Input the initial password: 0000 and press confirm and then you can set the rating and change the password.

RATING
Playing some DVD discs can be limited depending on the age of the users. The parental control function allows the playback limitation level to be set by the parent from level 1 to level 8. The level is from high to low. Level 1 is the lowest level and level 8 is the highest lever. This function is only valid for some DVD discs that have a limit level. And you should set the password first and make sure the password lock is locked.

DEFAULT
Use the arrow button to select [RESTORE] and press   return all the settings of the system to the original settings.

Language Setup

• OSD LANGUAGE
• AUDIO LANGUAGE
• SUBTITLE LANGUAGE
• MENU LANGUAGE

Use ▲ ▼ arrow buttons to select desired language and press confirm. to confirm.

If the selection is invalid, it means that the language is not available for this disc.

Audio Setup

AUDIO OUT

Use arrow button to select the audio output way.This is the way for you to select SPDIF/OFF, SPDIF/RAW, SPDIF/PCM.

KEY.
Press ▲ ▼ to adjust the tone level.

Video Setup

• BRIGHTNESS
• CONTRAST
• HUE
• SATURATION
• SHARPNESS

Use ▲ ▼ to adjust the corresponding value of the video output.

Speaker Setup

• DOWN MIX LT/RT : When you play a disc that has the logic effect, you can choose LT/RT output. The disc information will be decoded and show a better effect.
• STEREO : When 2ch output is selected, normal stereo signals may be played from the L&R output socket.

Digital Setup

OP MODE

LINE OUT: The input signals are linearly compressed and the volume is lower. You should rather choose LINE OUT setting at night.
RF REMOD: The volume is higher and adapts to daytime use.

DYNAMIC RANGE
When you choose LINE OUT mode, select DYNAMIC RANGE to adjust the compression ratio and you can get different effects. When you adjust to FULL, the compression ratio will be set to the lowest level. When adjust is OFF, the compression ratio will be set to the lowest level.

DUAL MONO
You can set the audio output mode for Left or Right channel. There are four modes: STEREO, MONO L, MONO R, and MIX MONO.

Playing the DVD Player

Playable file format

Supported discs format:
DVD, DVD+RW, DVD-RW, DVD+R, DVD-R, HDCD, VCD, CD, CD+R, CD-R, MP3 Music CD, Super VCD, CD-R/-RW

CD-Audio

| CD-DA, Video CD,

Super Video CD

CD-R| CD-DA, JPEG, MP3
CD-RW| Video CD, Super Video CD
USB| MP3, JPG

Note!

• It may not be able to play all the media discs in some cases due to the type of discs ( Especially for those DVD±R/RW discs), of which the method or device of the recording and how these files were created would distort the original contents and format.
• This unit does not guarantee the connection with all USB devices.
• The USB port does not support USB charging.
• FAT and FAT32 file systems are supported.

Play Picture CD Disc

Press to select the desired picture.

Play MP3 Disc

• When playing a MP3 disc, there is a menu screen on TV press the [▲] or ] button to shift the cursor to select the track or folder and press the button to play the selected track or folder (it needs to enter the sub-folder to select the track and press the button to play for some  MP3 discs).
• Also use the digit button to select the track.

USB Operations

• Remove the DVD/CD disc from the tray, and insert the USB drive into the USB jack. The player will automatically detect the readable files in the USB drive. Use the remote control to select the files for playback. (USB file unreadable means no supported file in USB.)

CD Ripping
The product has CD-ripping functions.

• Put a CD into the disc tray and then plug in a USB drive.
• Press key on the remote. A CD rip menu will be shown on the TV screen.

Options

• First, select the copying SPEED normal or fast when normal is selected, you can listen to the music while copying is in process. When fast is selected you will only see the copy process in the TV screen.
• Second, select the BITRATE. Usually, a 128K rate is used.
• Third, CREATE ID3 TAG. If the CD music files have the song name or singer name, you can build the ID3 information.

Tracks

• Move the cursor to the right-hand side. Select the song that you want to record. When it is selected, a Tick will be shown. If you move the cursor down to choose Select All, all the songs on the list will be copied. If selected none is chosen, any selected songs will be canceled. Move the cursor to the left side to select Start, press to confirm. Then the copying will start.
• You will see the next menu page which shows the copying is in process. Move the cursor to the left side to select QUIT, pres key.
• Exit RIPPING function.
• Play MP3 songs, press the button, put MP3 songs directly copied to the USB device.
• MP4 video playback, in the stop state, press the button, video to MP4 directly copied to the USB device.

Note

1. Make sure the USB drive has enough memory space for the music files.
2. The copied files are in MP3 format only.

Safety information

Important Notes:

• Please read through the manual carefully before connecting and operating. Do not open the cover or touch any internal components for non-professionals. Turn off the power when the unit is not being used.
  (Unplug the power cord if the unit is not used for a long time.)

• Do not expose the unit to direct sunlight.

• Keep away the heating sources or equipment.

• Do not expose the unit to moisture.

• Place the unit on a horizontal level. Keep the unit ventilated. Don’t block the heat hole. Overheating may cause malfunction.

• Clean the cabinet with a soft cloth Detergent or alcohol is forbidden.

• This book is only a guide for the user’s operation not a criterion for configuration. This apparatus shall not be exposed to dripping or splashing and no object filled with liquids, such as vases, shall be placed on the apparatus.

Flammable
The lightning flash is intended to alert the user to the presence of dangerous voltages within the product’s enclosure, and touching the inner parts may result in a risk of electric shock to persons.

Warning

• The exclamation mark is intended to alert the user to the presence of important operating instructions.
• To reduce the risk of electric shock or fire, do not open the cover. Refer servicing to qualified service personnel.

This mark indicates that this unit contains a class 1 laser product. The laser beam may produce harmful radiation if it directly touches the human body.

Specification

Audio frequency range

| DVD: 20Hz-20KHz(48KHzPCM) 20Hz~44KHz(96KHz PCM)

CD: 20Hz~20KHz

S/N ratio| ≥60 dB
Audio dynamic range| ≥60 dB
Operating conditions| Temperature: 5-40°C, operation flat, horizontal
Video output| 1.0V(P-P).75Ω
Audio output(analog audio)| 2.0V(rms)

Troubleshooting

If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs.

both the TV and the DVD player are powered on

Sound

|

There is no sound

| Audio cable does not connect well| Connect the cable properly
Power off the connected equipment| Turn on power
Audio setup is not correct| Select the suitable audio setup
In fast forward/rewind playback mode| Stop fast forward/rewind playback mode

The volume is low

|

Volume down

| Press “VOL+” on the remote control

to increase the volume or increase the TV volume

System is in LINE OUT setting

| Press the SETUP button on the remote control to set the mode.

SETUP——Digital Setup——OP MODE

——RF REMOD

Picture

|

There is no picture

| TV video setup is not correct| Select the TV suitable setup
Video cable does not connect well| Connect the cable properly
No signal connection| Make signal connection settings for TV

The picture is distorted

| Dirty disc| Clean the disc

In fast forward or fast rewind mode

| Stop fast forward/rewind playback mode.Sometimes, the tiny distortion appears. It is normal
Brightness or picture instability|

Anti-copy circuit influence

|

Connect the DVD unit to TV directly

Play

|

I can’t play the disc

|

Disc format not supported

| Blu-ray discs are not supported, you can check the disc formats supported by P9
Without disc| Put in the disc
Disc is put upside down| Put the disc property
The disc is dirty or bad| Clean or replace the disc
There is menu on TV screen| Use SETUP to turn off menu
Parental control is working| Set up parental off or change the setup

Device

| The button not working| Power wave or other sialic interference| Turn on/off the power and try again

The disc tray doesn’t work

|

Disk tray injects and ejects

repeatedly

| Power off. Unplug the power cable and wait for 30 seconds.

Plugin the power cable and try again

Disk tray does not open

| 1.  Power off. Unplug the power cable and wait for 30 seconds.

Plug in the power cable and try again

2.  Press ‘POWER’ and ‘EJECT’ in the same time

Remote control

|

The remote control doesn’t work

| Remote control is not pointed at the sensor|

Point the remote control at the sensor

Remote control is too far from DVD unit

|

Operate the remote control within 7m and make sure no obstacles in between

Batteries are exhausted| Replace the batteries

Warranty

Register Your Product

Customer Service

Need help with:

• Connecting your devices
• Technical support
• Product setup
• More information
• Return & Replacement

Email: SUPPORT@ELECTCOM.CO 

Frequently Asked Questions

Does the DVD player comes with all cable and remote?

Yes. The DVD player comes with RCA cables HDMI cable and remote.

Can i go on with the movies if this DVD player suddely shut off?

Yes of course. This DVD player has a last memory feature.

Does this DVD player have a way to turn on closed captioning?

You can close the DVD player captioning in the Setting. but It depends on your disc. If your disc doesn’t support closing the DVD player captioning, you can’t close it in the DVD player Setting.

Can i use this DVD player to copy music?

Yes, but this DVD player is only for copy music. no recorder.

Will it play cd's in WMA format?

It’s really more of a playback device than a recording device.

Is there continuous play with a CD?

Yes, this HDMI DVD player has a repeat option.

Can you record off the tv?

The description states player, not player/recorder. You can’t record with this.

Can you input a flash/thumb drive for playback?

There is a USB slot but I have not tried it.

There is a USB slot but I have not tried it.

Does it play mp3 audio Cd ?

Yes, this HDMI DVD player can play mp3 audio CDs.

How do I get subtitles?

The remote has a button for subtitles . Or you can go into setup and program the player for subtitles.This DVD player has a ton of features to help you adjust the format you like .

Video Overview Of Product

Download this PDF Link:ELECTCOM PRO DVD3621 DVD Players User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>