HUUM 16204 Drop Embedding Flange User Manual
- June 4, 2024
- HUUM
Table of Contents
HUUM 16204 Drop Embedding Flange
Installation
Dimension
EMBEDDING FLANGE
- Place the plates of embedding flange on the desired place of the boarding. Make sure that the end edges of the embedding flange are against the wall.
- Mark the inner edge of the embedding flange on the boarding of the sauna platform.
- Follow the marked line and draw the second contour 52 mm outwards. We recommend using a 52 mm wide wooden block for that purpose.
- Cut the wider contour by following the aperture.
- Attach the brackets of the embedding flange to the plates by using bolts and nuts.
- Install the embedding flange to the cut aperture, adjust the cut edge, if necessary.
- Attach the brackets to the boards of the platform with screws.
- You can now install the DROP heater. Follow the minimum height from the figure below:
huumsauna
References
Read User Manual Online (PDF format)
Loading......