HITLIGHTS B0C4GWWL4P RF Remote Controller Kit for RGBW RGB LED Strip Lights User Guide

HITLIGHTS B0C4GWWL4P RF Remote Controller Kit for RGBW RGB LED Strip

Lights

Product Information

The product includes a remote and a receiver for controlling LED lights. The remote has color shortcut keys, color switch, and dimming keys, turn on/off loop 6 modes, speed/brightness adjustment, and custom keys. The receiver has a running light, remote pair button, power input socket, mode shortcut keys, color switch, and dimming key, color memory keys, turn on/off loop 6 modes, speed/brightness adjustment, and custom keys. The remote and receiver can be paired together and one receiver can pair with up to 10 remotes. The product is powered by a CR2032 battery and has a working frequency of 433.92MHz.

Product Usage Instructions

1. To use the product, first pair the remote with the receiver. The remote is paired with the receiver at the factory, but if it is accidentally deleted, follow these steps to re-pair:

1. Short press the learning key on the receiver.
2. When the indicator light stays on, press any key on the remote.
3. When the indicator light on the receiver flashes fast, the pairing is successful.

2. To control the LED lights using the remote:

1. Use the color shortcut keys to select among JUMP3 (RGB 3 colors skip), JUMP7 (7 colors skip), FADE3 (RGB 3 colors fade), FADE7 (7 colors fade), FLASH (RGB 3 colors flash), and FLASH7 (7 colors flash).
2. Use the color switch and dimming key to switch between colors and adjust the brightness.
3. Use the turn on/off loop 6 modes button to play 1-7 colors dynamically, with 3 types of changes (Jump/Fade/Flash).
4. Use the speed/brightness adjustment and custom keys to customize the LED light display.
5. Use the color memory keys to save and apply the current static color.

3. To remove a pairing, long press the learning key on the receiver for 5 seconds until the pairing is successfully removed.

4. Refer to the wiring diagram for the LED light connection.

Operating Guide for Remote

1. Color shortcut keys

2. Mode shortcut keys
   ( JUMP3: RGB 3 colors skip JUMP7: 7 colors skip
   FADE3: RGB 3 colors fade FADE7: 7 colors fade
   FLASH: RGB 3 colors flash FLASH7: 7 colors flash)

3. Color switch and dimming Key

4. Color memory keys
   ( Long press to remember the current static color, short press to apply the static color saved before )

5. Turn ON / OFF

6. Loop 6 modes

7. Speed / brightness adjustment +/-

8. Custom keys
   ( Can play 1-7 colors dynamically, with 3 types of changes (Jump/Fade/Flash )

Operating Guide for Receiver

How to Pair the Remote with the Receiver

The remote is paired with the receiver at the factory if it is accidentally deleted, you can refer to the following way to re-pair:
Pairing: Short press the learning key on the receiver, when the indicator light stays on, then press any key on the remote, when the indicator light on the receiver flashes fast, the pairing is successful.

How to remove the pairing

Long press the learning key on the receiver for 5 seconds and remove it successfully.
Note: 1 receiver can pair to 10 remotes.

Specification

Remote

• Working Voltage: 3V DC
• Battery: CR2032
• Working Frequency: 433.92MHz
• Remote Distance: 100FT
• Working Temp: -22℉~131℉

Receiver

• Input Voltage: 12~24V DC
• Current Load: 5A×4CH / Max 20A
• Max Output Power: 120W×4CH / Max 480W
• Protection: Short circuit / Overload
• Working Temp: -22℉~131℉

Wiring Diagram

Connected 12V light strip, loads 0~240W (5A×4CH×12V)

Connected 24V light strip, loads 0~480W (5A×4CH×24V)

Product Size

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>