TRUSTECH GD9315BCW-4JA Electric Space Heaters User Guide

TRUSTECH GD9315BCW-4JA Electric Space Heaters User Guide

Thank you for choosing Trustees Space Heater! This user manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read it and start enjoying your warm winter!

Always here to help you

For any questions or help, please email us: trustech@afterservice.vip

Warning: Please read the user manual carefully before using the unit and save it for future reference. Thank you for choosing the products of TRUSTECH. This user manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take afewmoments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater.

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, injury to persons, and hyperthermia, including the following:

IMPORTANT INSTRUCTIONS

When using the unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons.

1. Please read All the instructions before using this unit
2. Be aware of the risk of electric shock. DO NOT open or try to repair the heater by yourself.
3. This heater may get hot when it is in use. To avoid any harm, DO NOT touch hot surfaces with your bare skin. If necessary, use the handles when moving this heater.
4. Keep combustible materials, such as furniture, pillow, bedding, paper, clothes, and curtains at least 3ft from the front of the heater and keep them away from the sides, top, and rear part. DO NOT place towels or other objects on the heater.
5. You must pay extreme attention if the heater is used when there are children or the disabled nearby. Don’t leave the heater operating and be unattended.
6. DO NOT operate the heater with a damaged cord or after any heater malfunctions, for example, it has been dropped or damaged in any manner. Return the heater to the authorized service facility for examination, electrical or mechanical adjustment, or repair.
7. The heater is not intended for use in bathrooms, laundry areas and similar indoor locations. NEVER locate the heater where it may fall into a bathtub or other water container. To protect against electrical hazards, DO NOT immerse it into water or other liquids.
8. DO NOT touch the control panel or plug it with a wet hand.
9. O NOT place the cord under carpets. DO NOT cover the cord with rugs, or similar coverings. Place the cord at the place where it will not be tripped over.
10. DO NOT insert or put any other objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
11. To prevent a possible fire, DO NOT block the air intake or exhaust in any manner.
12. DO NOT use it on soft surfaces where may block its openings, like a bed.
13. There are hot and arcing or sparking parts inside a heater. DO NOT use it in areas where gasoline, paint, explosive and/ or flammable liquids are used or stored. Keep the unit away from heated surfaces and open flames.
14. Always plug the heater directly into a wall outlet. Never use it with an extension cord or relocate the power tap (power outlet/ power strip).
15. To avoid a fire or shock hazard, plug the unit directly into a 120 V AC electrical outlet.
16. To disconnect the heater, turn controls to OFF, and then remove the plug from the power outlet. DO NOT unplug it by pulling the cord violently. 17. Always unplug the unit before moving or cleaning it, and whenever the heater is not in use.
17. It can be used for household use only as described in this manual. It is not recommended to use it for other functions, or it may cause a fire, electric shock, or injury to persons. And please use the original attachments provided or sold by unauthorized dealers, or it may cause hazards.
18.  Always use it on a dry, level surface. Use it on the floor only.
19. DO NOT use it outdoors.
20.  To reduce the risk of fire or electric shock, DO NOT use the unit with any speed control device.
21. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. There is not any user-serviceable part inside of the unit. If the unit needs to be examined or repaired, please contact the qualified personnel for help.
22. Connect the unit to properly grounded outlets only.
23. Hyperthermia can result in death. Symptoms of hyperthermia include high body temperature, headache, nausea, vomiting, tiredness, dizziness, fainting, and rapid pulse. If you begin to experience symptoms related to hyperthermia, turn off the heater and seek medical attention.
24. To avoid excessive room temperatures which can cause hyperthermia: DO NOT leave product running unattended in a confined space around infants, or individuals with reduced physical, sensory, or mental capabilities.
25. Save the user manual for future reference.

SPECIFICATION

Voltage Rating: 120 V (60Hz)
Power Consumption: 1500W
Unit Size: 11.97 in. (W) ×10.79 in. (D) × 15.51 in. (H)
Unit Weight: 13.89 lbs

SAFETY FEATURES

Tip-Over Safety Feature
The heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored to an upright position, the heater will be reset. To continue the operation, turn on the heater by using the supplied remote control or pressing the key on the control panel of the heater.

Overheat Safety Feature
The heater is equipped with an overheat safety feature. When the heater’s internal components reach certain temperature that could cause overheat or possible fire, the heater will automatically shut off.

OVERHEAT SAFETY FEATURE

Warnings

The voltage rating of the heater is 120 volts. It is a 3-pin grounded outlet as shown in A, and you can plug the unit directly. An adapter as shown in C is available for connecting the 3-pin plug to a 2-prong outlet. The ground lug extending from the adapter must be connected to the ground. The adapter should not be used if you can use the unit with the 3-pin grounded outlet directly. Do not neglect the safety purpose of the grounded plug. It is normal for the power cord to feel warm when the unit is in use, however, a loose connection between the outlet and the plug may cause overheating of the plug. If this occurs, try to insert the plug into a different outlet. Contact a qualified electrician to inspect the original outlet in case of any hazards.

ITEMS IN THE BOX

1 Infrared Zone Heating System
1 Remote Control (It needs 2 AAA batteries, but not Included.)
1* User Manual

PRODUCT DIAGRAM

CONTROL PANEL

1. ON/OFF Button: To power the unit on and off.

2. Mode Button: To select the mode among the High, Low and Eco modes.
   High Mode Indicator: It will light up when the high-heat mode is started. 3.2 Low Mode Indicator: It will light up when the low-heat mode is started.

3. Energy-saving Mode Indicator: It will light up when the energy-saving mode is started.

4. Timer Button: It is used to use the Timer mode and to set the time.

5. Temp-up Button: To increase the desired temperature.

6. Temp-down Button: To decrease the desired temperature.

7. Digital Display: It indicates the set room temperature or time.

8. Celsius Indicator: It will light up when the temperature is displayed in Celsius.

9. Fahrenheit Indicator: It will light up when the temperature is displayed in Fahrenheit.

10. Signal Receiving Window: It is for receiving a remote control signal.

REMOTE CONTROL

PREPARATION

Place the heater on a firm, level surface and plug it into a 120V 60Hz grounded power outlet. Turn on the power switch in the rear part of the unit. Only operate the heater in the upright position. Insert 2AAA batteries into the remote control before using the remote control. (The batteries are not included.)

OPERATING INSTRUCTION

Tum the heater on by pressing the ON/OFF button on the control panel or by pressing the Power button on the supplied remote control. Once the unit powers off, the heating element will stop working at first. But the fan will continue working for 3 minutes to dissipate the heat inside.

Select a heat Mode. Press the Mode button to select the modes among three heat modes.

The high mode consumes 1500W; while the low mode uses 750W. ECO mode is an Economic Energy-saving Function. When the ECO mode is chosen, the heater will manage itself from less to more heating power (watts) in an attempt to maintain a constant warmth of 68℉, (20℃).

Adjust the desired temperature by pressing the Up/ Down button on the control panel or remote control

The desired temperature options vary from59℉to 86℉, or from 15℃to 30℃. Once the desired temperature has been chosen, the heater will remain on until the roomtemperature increases to the temperature on the digital display, The heater will cycle on and off to maintain the desired temperatureinthe room.

Press the ℃/ ℉ button to change the displayed temperature between Fahrenheit and Celsius. Long press the Mode button, you can convert the temperature displayed between Fahrenheit and Celsius

The Fahrenheit indicator will light up when the temperature is displayed in Fahrenheit. The Celsius indicator will light up when the
temperature is displayed in Celsius

Set the timer to power off

Note:
Setting the Timer to power off the unit will allow the heater to power off after a certain set time, andcan only be set while the heater is in the “On” position.

Turn the heater on. Press the Timer button on the heater’s control panel or remote control

The digital display changes from the “temperature” to the “hours” option for the timer. Continue to press the Timer buttonto change the number of hours you would like the heater to run before powering itself off. The hour options for the timer are from0 to 12 hours (in 1 hour increment).

The selected hour increments will flash for a few seconds, then revert to the set desired temperature. The Timer indicator will remain on as long as the’ Timer is set. The heater will power off when the internal heater clock counts down the hour increments you set.

Set the timer to power ON

Note:
Setting the Timer to power on will allow the heater to power on after a certain set time, and can only beset while the heater is in the “Off” position.

Turn the heater on. Press the Timer button on the heater’s control panel or remote control.

The digital display shows the “hours” option for the timer. Continue to press the Timer button to change the number of hours you would like the heater’s internal clock to count down before powering itself on. The hour options for the timer are from0 to 12 hours (in 1 hour increment).

The Timer indicator will remain on as long as the Timer is set. The heater will power itself on when the internal heater clock counts down the hour increments you set

Set the electronic lock

The Electronic Lock can prevent the heater from being accidentally operated by children. The locking mechanism can be set in both the ON and OFF modes

Press the Temp-up and Temp-down buttons at the same time for 3 seconds. The locking is launched when you hear a beep. When locked, the functions of the control panel and remote control will be locked for use.

When you need to unlock it, press the Temp-up and Temp-down buttons at the same time for 3 seconds. After that, you will hear a beep. The control panel and remote control will become functional again.

MAINTENANCE

1. Turn off the power switch in the rear part of the unit. .

2. Unplug the unit and cool it completely

3. To keep the heater clean, the outer shell should be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. DO NOT let the liquid enter the heater.

4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater.

5. DO NOT immerse the heater into water.

6. Wait until the unit is completely dry before use.

7. The air filter needs cleaning after it is used for 3 months. Please take off the air filter with 2 steps as shown in the drawing below. Flush and clean the air filter with water, and then dry it  and reassemble it.
   

8. If you do not use the heater for a long time, please take out the batteries from the remote control (to prevent corrosion) as shown below. Store the remote control in a safe place
   

STORAGE

Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use theoriginal packaging to repack the unit.

If the heater cannot work normal, please check the following situations before seeking the repair advice.

1. Check if the power cord is plugged into an electrical outlet, if not, plug it in.
2. Check if the electricity to the main power switch (in the back) is working.
3. Check to see if the battery on the remote control is placed correctly and undamaged.

Note:

For the heater to function properly, the desired temperature on the heater must be set a few degrees higher than the temperature in the room. If it seems that the unit cannot heat up normally, increase the desired temperature on the heater to engage the heat elements.

WARRANTY

TRUSTECH warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”). If a defect arises and a valid claim is received within the Warranty Period, at its option, TRUSTECH will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or provide a store credit in the amount of the purchase price of the original product. A replacement product or part, including a user-installable part installed in accordance with instructions provided by TRUSTECH, assumes the remaining warranty of the original product. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes TRUSTECH’ s property. When a store credit is given, the original product must be returned to TRUSTECH and becomes TRUSTECH’ s property. To obtain warranty service, e-mail TRUSTECH Limited Warranty Service at trustech@afterservice.vip. Please be prepared to describe the product that needs services and the nature of the problems.

This warranty does not apply to: damage caused by failure to follow instructions relating to products’ use or the installation of components; damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; damage caused by service performed by anyone who is not a representative of TRUSTECH; accessories used in conjunction with a covered product a product or part that has been modified to alter functionality or capability; items intended to be periodically replaced by the purchaser during the normal life of the product including, without limitation, batteries or light bulbs; any product sold ‘as is’ including, without limitation, floor demonstration models and refurbished items; or a product that is used commercially or for a commercial purpose.

CONTACT US

Thank you for choosing TRUSTECH product. If there is a defect arises during one year, please feel free to contact us to get your valid claim. To obtain warranty service, please your model and order of the product via:

trustech@afterservice.vip
☎ +1（855）620 5858

Our usual response time is within 12 hours!

Get 24/7 Assistance at

Use camera or QR scanner to scan

Or Visit: https://trustech.afterservice.vip

Questions or Problems?

Tell us
We are here to help with our lifetime professional 100% satisfied service within 12 hrs.

trustech@afterservice.vip

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>