SESSAK K54618-40 Lighting Robyn 40 Pendant Lamp User Manual
- June 15, 2024
- SESSAK
Table of Contents
User Manual
K54618-40 Lighting Robyn 40 Pendant Lamp
K54618-40 Lighting Robyn 40 Pendant Lamp
K54618-40 220-240V – 50/60Hz 1x E27 Max. 15W
Read the entire instructions before installing the luminaire
Save the instructions for potential future need. Disconnect the electrical
power-supply before installation or service.
If the electrical cord of the luminaire becomes damaged, the lumnaire must be
discarded.
Symbols that POTENTIALLY can be found on the luminaire and their meaning.
CHECK the luminaire.
| Class Ⅰ. The luminaire must be connected to protective earth.
---|---
| Class Ⅱ. The luminaire is double-insulated and is not to be connected to
protective earth.
**| The product conforms with health, safety, and environmental protection
standards for products sold within the EuropeanEconomic Area (EEA)
| The protective earth cable (usually yellow-green) is connected to the
terminal identified by this symbol.
L| The phase (live) cable (usually brown) is connected to the terminal
identified by this symbol (L)
N| The neutral cable (usually blue) is connected to the cable identified
by this symbol (N)
| States the minimum distance in meters to the area that is to be illuminated,
TAKE INTO ACCOUNT doors, widows etc., that could possibly come within this
distance when they are opened.
IP21| Ingress Protection class 21 (protection against dripping water)
IP44| Ingress Protection class 44 (protection against splashing water)
| W The HIGHEST ALLOWED power of the bulbs in Watts
| Only for indoor use
**| Is NOT to be thrown away with household waste. You can help in the
protection of the enviroment by taking discarded products to a recycling-
station intended for them.
SESSAK OY AB – PORVOO
FINLAND
WWW.SESSAK.FI
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>