zelmer ZFS0919 Meat Slicer User Manual
- June 13, 2024
- zelmer
Table of Contents
zelmer ZFS0919 Meat Slicer
WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.
WARNING
Please read the instructions for use carefully prior to using the product.
store these in a safe place for future reference.
DESCRIPTION
-
Power switch
1A. Power switch lock button -
Slicing thickness dial (0-15 mm)
-
Food slider
-
Food pusher
-
Cutter disc with corrugated blade
-
Cutter blade installation knob
-
Slider tube
SAFETY INSTRUCTIONS
Check that your mains voltage corresponds to that stated on the appliance.
From time to time check the cord for damages. Never used the appliance if cord
or appliance shows any signs of damage.
Only use the appliance for domestic purposes and in the way indicated in these
instructions.
Never immerse the appliance in water or any other liquid for any reason
whatsoever. Never place it into the dishwasher.
Never use the appliance near hot surfaces.
If the supply cord is damaged it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Always disconnect the appliance from the supply if it is left unattended and
before assembling, disassembling or cleaning.
All repairs should be made by a competent qualified electrician.
Never use the appliance outside and always place it in a dry environment.
Never use accessories which are not recommended by the producer. They could
constitute a danger to the user and risk to damage the appliance.
Never move the appliance by pulling the cord. Mark sure
the cord cannot get caught in any way. Do not wind the cord around the
appliance and do not bend it.
Mark sure the appliance is set on a flat surface.
Unplug the appliance when not in use.
Only use this slicer for cooking applications. Only cut articles such as
cheese, meat, bread and preparations.
Never cut frozen food with this slicer.
Never cut food only by using your hands, always use the slide and its food
guide unless it is impossible because of the size of the article. Make sure
never to touch the knife.
This kind of appliance cannot function continuously; it is not a professional
type of appliance. It is necessary to make temporary stops.
The blade of the appliance is extremely sharp, always be careful when cleaning
the appliance.
It is absolutely necessary to keep this appliance clean at all times as it
comes into direct contact with food.
Never touch the blade when the appliance is in use.
Furthermore, never try to stop the movement of the blade in any way
whatsoever.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
This appliance shall not be used by children. Keep the appliance and its cord
out of reach of children.
Appliances can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and
if they understand the hazards involved.
Children shall not play with the appliance.
This device is designed for use at a maximum altitude up to 2000m above sea
level.
IMPORTANT WARNINGS
Any other servicing should be performed by an authorized service
representative.
This appliance is not for professional use. You should follow the requested
breaks. Failure to follow this instruction carefully may result in damage to
the motor. Refer to the maximum continuous use time
KB/MAX. 5 minutes, where 5 is the maximum usage time..
The breaks should last at least 5 minutes.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard
B &B Trends S.L. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.
BEFORE USE
Unpack the device from the carton, remove all stickers, plastic bags, fillers
and blockages transport. Note
– the cutting disc also has a transport lock. Clean the device according to
the instructions in the “CLEANING AND MAINTENANCE” chapter.
USE
IMPORTANT: After 5 minutes of continuous use it needs to rest for 10 minutes. After 5 cycles, it needs to rest for half an hour.
Place the device on a flat and dry surface. The person operating the device
should apply pressure
buttons with your right hand and hold the presser with your left hand.
Use the slicing thickness adjustment knob (2) to set the required slicing
thickness.
Connect the device to the mains.
Place the food to be cut on the mobile carriage (3) between the blade of the
cutting disc (5) and the presser (4).
Slide the switch lock button (1A) towards the switch (1) and at the same time
press the switch (1) – the slicer will start working. Releasing the pressure
on the switch (1) will stop the slicer.
Move the slicer carriage (3) forwards and backwards, while pressing the food
against the knife with the presser (4). Always use the presser when cutting
small pieces of food.
After finishing work, disconnect the slicer from the power supply and then
clean it.
ATTENTION! The cutting disc of the machine is sharp. Handle it carefully
TIPS
To slice meats wafer thin, chill thoroughly for 2-4 hours in freezer before
slicing. To prevent food from sticking to the slicer, moisten the cutting disc
with a damp cloth – this will also make cutting food easier.
When slicing warm boneless roasts, remove from oven and let set 15 to 20
minutes before slicing.
Cold cuts keep longer and retain flavor if sliced as needed.
Foods with an uneven texture-like fish and thin steaks- are often difficult to
slice. Partially freeze before slicing.
The appliance can also slice e.g. carrots or potatoes in thin slices for
chips.
Fresh bread is difficult to cut. Remove cut slices of bread on a regular
basis. Never cut warm bread.
MAINTENANCE AND CLEANING
For convenience when cleaning the slicer, tilt the trolley (3) to the vertical
position.
Before cleaning, be sure to disconnect the device from the power source.
Wipe the inside and outside surfaces with a paper towel or soft cloth.
Do not wash the device in the dishwasher.
Do not clean interior or exterior surfaces with scouring pads or steel wool as
this may damage the finish.
Do not immerse the device in water or other liquids.
The cutting disc (5) can be removed by turning the mounting knob (6)
clockwise. Be careful: the knife is very sharp.
After cleaning the blade, turn the knob counterclockwise to lock the blade.
Dry all parts thoroughly before storing.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead going to the electrical and electronic waste collection centre closest to your home.
WARRANTY REPORT
B&B TRENDS, S.L. guarantees compliance of this product for the use for which
it is intended for a period of two years. In the case of breakdown during the
term of this warranty, users are entitled to repair or else the replacement of
the product at no charge if the former is unavailable, unless one of these
options proves impossible to fulfill or is disproportionate. In this case, you
can then opt for a reduction in price or cancellation of the sale, which must
be dealt with directly with the sales vendor. This also covers replacement of
spare parts provided that the product has been used according to the
recommendations specified in this manual for both cases, and has not !been
tampered with by any third party that is not authorised by B&B TRENDS, S.L.
The warranty will not cover any parts subject to wear and tear.
This warranty does not affect your rights as a consumer in accordance with the
provisions in Directive 1999/44/EC for member states of the European Union.
USE OF WARRANTY
Customers must contact a B&B TRENDS, S.L. authorised Technical Service for
repair of the product.
Since any tampering of the same by anyone not authorised by B&B TRENDS, S.L.,
or the careless or improper use of the same shall render this warranty null
and void. The warranty must be fully completed and delivered along with the
receipt or delivery docket for the effective exercise of rights under this
warranty.
This warranty should be retained by the user as well as the invoice, receipt
or the delivery docket to facilitate the exercise of these rights. For
technical service and after-sales care outside the Polish territory, please
submit your query to the point of sale where you purchased the item or check
for further aftersales information at www.zelmer.com
Customer Support
SERIES: ZFS
MOD: ZFS0919
220-240V~ 50/60Hz 150W
Type: GTM-8636
B &B TRENDS, S.L.
C. Cataluña, 24 · P.I. Ca N’Oller
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>