Univex 1404 Countertop Hamburger Patty Press Instruction Manual
- June 16, 2024
- univex
Table of Contents
OPERATORS MANUAL
1404/1405/1406
PATTY PRESS
WE THANK YOU FOR YOUR PURCHASE OF OUR
MODEL 1404/1405/1406 PATTY PRESS
All of us…
at Univex
INSTRUCTION MANUAL
INTRODUCTION
The Univex model 1404, 1405 and 1406 Patty Presses are designed to press
hamburger meat into patties. The 1404 Patty Press produces a 4 inch diameter
patty, the 1405 Patty Press produces a 5 inch diameter patty and the 1406
Patty Press produces a 6 inch diameter patty.
The Univex Patty Press can be used to form patties of food products other than
hamburger such as: crab cakes, fish cakes and vegetable burgers.
The thickness of the patties produced is determined by the amount of hamburger
or other food products placed in the press.
This manual contains instructions for the inspection, safe operation, care and
maintenance of the Patty Press.
INSPECTION
The 1404, 1405 and 1406 Patty Press is inspected and tested at the factory. The person opening the shipping carton should re-inspect the Patty Press immediately upon receipt for loose, damaged or missing parts. Any damages should be reported to the carrier immediately and any shortages of parts should be reported to your dealer or directly to Univex Corporation Customer Service Department.
OVERALL VIEW OF PATTY PRESS
FIGURE 1
OPERATORS INSTRUCTIONS
- Push the handle all the way back (see figure 1).
- Place a ball of hamburger meat on the bottom press plate.
- Press the release button to lower the press plate into the forming dish.
- Pull the handle all the way forward and apply light pressure to form the patty.
- Push the handle all the way back. The press plate rises automatically for easy removal of the formed patty.
- Repeat steps 1-5 for each patty.
If you plan to stack finished patties for future use, place a film or paper
divider (provided with the Patty Press) on the press plate before loading it
with hamburger meat.
A working supply of dividers can be kept in the film divider holder above the
top press plate (see figure 1).
CLEANING
To avoid damaging the Patty Press’s high polished finish, never put any of the components through a dishwashing machine. Wash the Patty Press with a mild soap and water solution. Use a brush in small areas. Dry components with a soft dry cloth.
Warranty
The Univex 1404/1405/1406 Patty Press is warranted by Univex Corporation
against any defects in materials or workmanship for a period of 6 months from
the date of purchase by the end user. Please call the Univex Warranty Service
Department at 800-258- 6358 to report warranty claims before arranging for
repair of the unit. The unit must be delivered to a Univex authorized service
agent or to the Univex facility for warranty repairs. The end user is
responsible for all shipping or travel charges arising from the repair or
servicing of this unit under warranty. Univex will not cover overtime charges
of any kind. Any service or repair must take place in the United States.
Damages incurred in transit or incurred because of installation error,
accident, alteration or misuse are not covered. Transit damages should be
reported to the carrier immediately.
Univex will not be liable for any consequential, compensatory incidental or
special damages.
Toll free ordering fax 1-800-356-5614
3 Old Rockingham Road, Salem, N.H. 03079-2140
Telephone 1-603-893-6191 Fax
1-603-893-1249
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>