DECATHLON D500-900 Homer Trainer Instruction Manual
- June 15, 2024
- DECATHLON
Table of Contents
VAN RYSEL D500/900
19 KG 41.9 LB|
<115 kg
<253.5 Lb
---|---
D500-900 Homer Trainer
Failure to observe the following warnings may lead to an accident that could result in death or serious injury.
WARNING
- Read all instructions carefully before using the home trainer.
- Do not use the home trainer if it isn’t working properly
- Before getting on the bike, make sure it’s property installed (as horizontal as possible and not askew) and correctly attached to the home trainer.
- Please consult your doctor before beginning or modifying any exercise programme.
- Do not put your hands or objects near the moving parts of the home trainer
- The home trainer may become warm to the touch when used for an extended period.
- Do not attempt to disassemble the bike while the flywheel is in motion.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Only use the home trainer on a stable, level surface with properly adjusted levelling feet
- Prevent the home trainer from coming into contact with water.
- The appliance is only to be used with the power supply unit provided with the appliance.
- Make sure the cassette and bike are securely attached to the home trainer before each ride.
- Unplug the home trainer when not in use
MAX user weight 115 kg
The home trainer can only be used with bikes with a minimum wheel diameter of
XX inches (but exclude certain types of bikes such as children’s/teenagers’
bikes)
In hot weather, use the home trainer in a ventilated, cool place (avoid
heatstroke)
Make sure your computer, tablet or smartphone is fixed or placed on a stable
item and is not likely to fall during use of the home trainer
If in doubt, should you refer to this manual, the FAQs on the support site or
the workshop?
MAINTENANCE
- Switch off then unplug the home trainer before cleaning it or carrying out any other maintenance procedure >> if it’s hot, maybe it’s advisable to let it cool down?
- To avoid any imbalance or vibration when using the home trainer, do not drop it during assembly
- Store the home trainer in a dry place at room temperature
- Wipe down the trainer after each use. The home trainer should only be cleaned with a dry cloth and should not be exposed to cleaning solvents or abrasives
- Keep the home trainer clean and free of debris
- Regularly check if the nuts and bolts of the home trainer are tight
ASSEMBLY
included
SHIMANO HYPERGLIDE ROAD module body included. The SRAM XD / XD-R and CAMPAGNOLO module bodies are sold separately
http://onelap.com/topic/onelapfit.html
Calibration
- To guarantee the accuracy advertised, please calibrate your home trainer.
- We recommend that you calibrate your home trainer during your first session and every 2 weeks thereafter.
- To perform the calibration, select the SPIN DOWN option in the ONELAPFIT application.
- Please use your home trainer for at least 10 minutes before the spin down.
STORAGE & USE
2 year guarantee subject to normal usage. – Failure to follow any of these warnings could result in serious injury or death. – Consult the user instructions before use. – Keep this manual for the entire life of the product. – Assembly must be performed by an adult. – Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authonty or retailer for recycling advice. Collecting and recycling your product and/or its battery separately for disposal helps to conserve natural resources and protect the environment and human health.
This product is conform to the RED 2014/53/EU. The EU declaration of conformity is available at the following internet link.
https://p.decathlon.net/8013/8735159?l=q4
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation,
Science and Economic Development Canada (ISED) radio frequency exposure
limits. The Wireless Device should be used in such a manner such that the
potential for human contact during normal operation is minimized.
This device has also been evaluated and shown compliant with the ISED RF
Exposure limits under mobile exposure conditions. (antennas are greater than
20 cm from a person’s body).
USA : This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance. – RF Exposure warning : This equipment must be
installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or arene End-users and
installers must be provide with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
AUTION: Any changes or modifications not expressly approved by the grantee of
this device could void the user’s authority to operate the equipment. – USA :
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.»
CAUTION: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1 )This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.
Main material : Plastic
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1 )This device
may not cause interference.(2)This device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
USA : This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.»
CAUTION: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Pack Ref: 5171674
https://p.decathlon.net/7022/21361?l=q7
References
- Decathlon | Türkiye'nin En Büyük Spor Giyim ve Malzeme Mağazası
- Decathlon webáruház - 75 sport egy helyen
- Decathlon | Move people through the wonders of sport | Decathlon
- SUPPORT DECATHLON | SAV des produits sportifs DECATHLON
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>