Skullcandy S6KBW Grom Wireless Headphones User Manual

: June 16, 2024
: Skullcandy

Table of Contents

Skullcandy S6KBW Grom Wireless Headphones
Power
Pairing Mode
Pairing
Volume
Reset Paired
Specifications
FCC Statement
WARRANTY
DECLARATION OF CONFORMITY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Skullcandy S6KBW Grom Wireless Headphones

Skullcandy-S6KBW-Grom-Wireless-Headphones-product

Power

Power – On

Off Mode

Power – Off

On Mode

Pairing Mode

On Mode

Pairing

Pairing Mode

Off Mode

Pair Device

Pair New Device
Voice Prompt – “Ready to Pair”
Available Device – “Grom Wireless”

Volume

Volume Up

Volume Down

Track Forward

Track Backward

Play/Pause / Answer Call

Activate Assistant

Skullcandy-S6KBW-Grom-Wireless-Headphones-fig-11

Share Audio

Plug AUX in Audio Out
Right Side
Share Audio with Aux Cable

Charge Headphones

Plug in USB-C cable to charge
Show charging Red LED

Reset Paired

Reset Paired Device List

While ON
Bluetooth Disconnected
Reset Device

Contains a Li-ion battery. The battery must be recycled or disposed of properly.

CAUTION: Risk of explosion if the battery is replaced by an incorrect typedisposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Questions Visit: www.skullcandy.com

Maximum operating temperature 45°C.

Specifications

Speaker Driver: 6mm
Impedance: 22 Ohms, THD <3%@50Hz-10KHz,
Voltage Regulation: 3.7v,
Bluetooth® 5.2,
Frequency Band: 2.402GHz – 2.480GHz,
Maximum Power: 8.44 dBm,
Weight: 62.5g.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference
this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

ISED Compliance Statement

This device contains licence-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

FCC SAR statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

ISED SAR Compliance Statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

Americas

Skullcandy, Inc.
6301 N Landmark Dr
Park City, UT 84098 U.S.A.
Skullcandy.com

Canada

Skullcandy Canada ULC
303-611 Alexander Street Vancouver, BC, V6A 1E1 Canada
Skullcandy.ca

Skullcandy UK LTD

Andrews House College Road Guildford GU1 4QB
Skullcandy.co.uk

Europe

Skullcandy Europe BV
Postbus 425 5500AK Veldhoven Nederland
Skullcandy.eu

WARRANTY

LIMITED WARRANTY- FOR SALES IN AUSTRALIA

AUS – Limited warranty for sales in Australia against all defects for 1 year from the date of purchase. Product will be replaced or refunded at our option. At your cost, deliver product and Proof of Purchase to Skullcandy at 6 Grevillea st, Byron Bay, 2481, NSW, Australia. Ph +61 02 6639 5555. Further details at www.skullcandy.com.au or contact warranty@skullcandy.com.au. Your benefits under this Skullcandy warranty are in addition to your other rights and remedies under a law in relation to this product. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

1-YEAR GLOBAL WARRANTY

EN Skullcandy products are backed by a 1-year warranty. If it doesn’t work the way we promised, we’ll make it right. For claims, questions, or Terms & Conditions:

U.S. & Canada only: visit Skullcandy.com/warranty or call 1-888-MYSKULL
All other countries: visit Skullcandy.com/support/international-support

Many electrical items can be repaired or recycled, saving natural resources and the environment. If you do not recycle, electrical equipment will end up in landfill where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. To remind you that old electrical equipment can be recycled, it is now marked with a crossed out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with the crossed out wheeled bin symbol) in your bin.

Many Local Authorities will have containers that collect batteries for recycling. Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfill where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. Batteries containing hazardous materials such as mercury (Hg), cadmium (Cd) or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations the battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities or return to purchase location for recycling or disposal.

Warning: To avoid hearing damage, do not listen at high volume levels.

DECLARATION OF CONFORMITY

SIMPLIFIED EU
DECLARATION OF CONFORMITY

Hereby, Skullcandy Internation GmbH declares that the radio equipment type [Model: S6KBW] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: skullcandy.eu/product-documents

IS 616 / 1EC 60065