ELITE SCREENS YardMaster Manual Series Outdoor Retractable Projector Screen User Guide

ELITE SCREENS YardMaster Manual Series Outdoor Retractable Projector

Screen

Product Information

YardMaster Manual series

Outdoor Movie Manual Projector Screen

Thank you for choosing the Yard Master Manual projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.
The Yard Master Manual is a non-electric outdoor projector screen for wall and patio installations that brings media room quality to your outdoor spaces. Its sleek aluminum casing   beautifully accessorizes your backyard, patio, pool deck or anywhere a gathering for evening movie time is appropriate.

Product Usage Instructions

Care & Use Instructions

Dust, dirt, and scratches on the projection surface will affect the picture quality. Please take note of the points below to prevent that from occurring:

1. Do not touch the projection surface with your hands.
2. Do not write or draw on the projection surface.
3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.
4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.

Installation Instructions

Flush Mount to the Wall

1. Mark the location of where the screen is to be installed, drill your holes and insert the M10 Anchors (B).
2. Install the Mounting Brackets (A) to the wall and secure with the M4x50 Screws (B).
3. Attach the screen to the Mounting Brackets (A) by inserting the top of the case to Fix Plate 1 and securing the back of the case to Fix Plate 2. Make sure the case slots are securely attached to the mounting brackets.

Flush Mount to the Ceiling

1. Mark the location of where the screen is to be installed, drill your holes and insert the M10 Anchors (B).
2. Install the Mounting Brackets (A) to the ceiling and secure with the M4x50 Screws (B).
3. Attach the screen to the Mounting Bracket (A) by inserting the top of the case to Fix Plate 1 and securing the back of the case to Fix Plate 2. Make sure the case slots are securely attached to the Mounting Bracket (A).

Suspended Ceiling using Chains (additional hardware required)

1. You can also hang the screen on a ceiling by using chains (not included).
2. Connect the Suspended Ceiling Bracket Connector (D) to the Mounting Bracket (A) and suspend the screen using chains.

Specifications

• Product Type: Manual projector screen
• Installation: Wall or ceiling
• Material: Aluminum casing

Frequently Asked Questions (FAQ)

• Q: Can I use chemical cleaning agents to clean the projection surface?
  A: No, it is recommended to use a soft damp cloth with clean water to clean the projection surface. Do not use chemical cleaning agents or alcohol.

• Q: Can I touch the projection surface with my hands?
  A: No, it is advised not to touch the projection surface with your hands as it may affect the picture quality.

• Q: Can I write or draw on the projection surface?
  A: No, writing or drawing on the projection surface is not recommended as it may affect the picture quality.

Thank you for choosing the Yard Master Manual projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life

Product Description

The Yard Master Manual is a non-electric outdoor projector screen for wall and patio installations that brings media room quality to your outdoor spaces. Its sleek aluminum casing beautifully accessorizes your backyard, patio, pool deck or anywhere a gathering for evening movie time is appropriate.

Outdoor Projection Screen Disclaimer
Never leave your projection screen out and exposed to direct sunlight. Regardless of screen brand, prolonged exposure to the sun’s ultraviolet radiation degrades the chemical bonds causing the material to eventually decompose. Photodegradation first causes the material to lose its theater- grade reflective qualities. Eventually, nature will destroy even synthetic materials. For this reason, the Yard Master Manual has a retractable design that allows the material to be drawn up into its protective casing to be shielded from solar radiation.

Care & Use Instructions

Dust, dirt, and scratches on the projection surface will affect the picture quality, please take note of the points below to prevent that from occurring:

1. Do not touch the projection surface with your hands
2. Do not write or draw on the projection surface
3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.
4. Use a soft damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.

To avoid damage and injury, the screen should only be operated by adults.

Hardware Parts List for Yard Master Manual Series

Installation Instructions

Please consult a professional installer, Elite Screens is not liable for faulty installations.

Flush Mount to the Wall

1. Mark the location of where the screen is to be installed, drill your holes and insert the M10Anchors (B).
2. Install the Mounting Brackets (A) to the wall and secure with the M4x50 Screws (B).
3. Attach the screen to the Mounting Brackets (A) by inserting the top of the case to Fix Plate 1 and securing the back of the case to Fix Plate 2. Make sure the case slots are securely attached to the mounting brackets.

Flush Mount to the Ceiling

1. Mark the location of where the screen is to be installed, drill your holes and insert the M10Anchors (B).
2. Install the Mounting Brackets (A) to the ceiling and secure with the M4x50 Screws (B).
3. Attach the screen to the Mounting Bracket (A) by inserting the top of the case to FixPlate 1 and securing the back of the case to Fix Plate 2. Make sure the case slots are securely attached to the Mounting Bracket (A).

Suspended Ceiling using Chains (additional hardware required)

1. You can also hang the screen on a ceiling by using chains (not included).
2. Connect the Suspended Ceiling Bracket Connector (D) to the Mounting Bracket (A) and secure with the M5x15 Screws & Bolts (E).
3. Insert chains (not included through the loopholes of the Suspended Ceiling Bracket Connector(D).

Screen removal from the Mounting Brackets

1. Pull down on the Mounting Bracket Release Tab and remove the bottom case away from the wall/ceiling followed by the top of the case.

Screen Operation

1. Pull the screen down from the lanyard or the handle only in a 90-degree angle. The screen is designed to stop at any location. To achieve this, make sure to pull straight down and allow the screen to come up to lock into place. Do not attempt to pull the screen down by the surface or touch the screen, as it will damage the screen and void the warranty.
2. To retract the screen, simply pull the screen down more than 2 inches and retract the screen back releasing it up gently. The screen is equipped with a SLOW RETRACT MECHANISM which allows the screen to slowly retract without the need to hold on to the handle or lanyard. Simply release the handle and the screen will retract by itself into the housing.

Attention : If the screen does not unlock, carefully pull the screen straight down with a little force. Always pull the screen down at a 90-degree angle.

Securing the weight bar location

1. Pull the screen down until you have reached the desired location.
2. Mark the drill-hole area of where the screw is to be installed, then retract the screen.
3. Drill the hole and insert an M10Anchor (C), secure it with an M5x50 Screw (C). Allow a 1-inch gap between the wall and screw head to allow room for the weight bar and pull handle to release freely.
4. Pull the screen down and secure it to the screw location. Make any adjustments if there are any deviations.
   Note : Remove the screw when not in use any longer to avoid an accident.

How to ground the screen

1. Attach the Hook (G) into the Iron Ring, and join the Hook (G) and Curved Nail (F) using the Elastic String (H)
2. Drive the Curved Nail (F) into the ground and stretch the Elastic String (H) in the direction of the Curved Nail (F) to secure the screen to the ground and supply adequate tension to the screen.

For more information, technical support or your local EliteScreens contact, please visit www.elitescreens.com

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>