ELITE SCREENS GolfSim Portable Series Sports Simulation Impact/Projector Screen User Guide

ELITE SCREENS GolfSim Portable Series Sports Simulation Impact/Projector

Screen

Product Information

Specifications

• Product Name: GolfSim Portable Series Sports Simulation Impact/Projector Screen
• Manufacturer: Elite Screens
• Screen Fabric: ImpactWhiteTM durable material
• Frame Material: Aluminum
• Recommended Usage: Light breeze conditions (up to 7 mph)

FAQ

• Q: How should I clean the projection surface?
  • A: To clean the surface, gently wipe it with a soft, dry cloth to remove any dust or dirt. Do not use any liquids or harsh chemicals.
• Q: Can the screen be used with any type of projector?
  • A: Yes, the GolfSim Portable screen is compatible with most projectors. Ensure proper setup for optimal performance.
• Q: What should I do if I notice any damage to the screen fabric?
  • A: Contact Elite Screens customer support for assistance and do not attempt to repair it yourself to avoid further damage.

Thank you for choosing the GolfSim Portable projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.

Care & Use Instructions

• Elite Screens highly recommends two people to assemble the GolfSim Portable screen.
• Make sure to distinguish the front/back of the impact/projection screen when setting it up. The backside has Velcro. Follow the instructions in the screen assembly section to assure the front side is set up properly.
• Be sure to use the screen only during a light breeze (up to wind speeds of 7 mph); it is not meant to withstand heavy winds. *Elite Screens is not responsible for damages due to negligence resulting from misuse under weather conditions and will void your warranty.
• Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the points below to prevent that from occurring:
  • Do not touch the projection surface with your hands.
  • Do not write or draw on the projection surface.
  • Do not point at the projection surface with your fingers or sharp objects; this will damage the screen material.
  • Use a soft bristle brush or dry microfiber cloth to remove dust from the screen surface.
  • Do NOT use any solutions, chemical cleaning agents, alcohol, or abrasive to clean the screen surface.
  • When cleaning the projection surface, use a soft cloth dampened with warm water to remove any traces.
  • Do NOT rub or apply pressure when cleaning the surface.
  • Use a fabric steamer no higher than Polyester setting to remove any wrinkles or folds in the material.
• After using the screen, disassemble it and store it in the carrying bag provided.
• To avoid damage and injury, the screen should only be operated by adults.

Product Description

• Design: The aluminum frame is designed to be light weight and easily operated making it easy to carry, assemble and disassemble.
• Screen Fabric: The screen fabric is attached to the rectangular frame and held in place by Velcro strips, which ensure an evenly stretched and flat surface. The ImpactWhite™ screen material is durable and can be folded many times without causing damage or distortion to the surface.

Installation Tips and Precautions

We consider our impact screens a wearable item and the life of them will vary according to their use.

1. Make sure to allow proper distance for swing range to protect children, pets, ceilings, walls, windows, or any other property.
2. Avoid using golf balls with scuffs or markings to maximize the life of your ImpactWhite™ 360 screen. If possible, use new golf balls.
3. Never place the screen over a window or under constant sun exposure. Solar radiation from direct sunlight destroys the synthetic fibers of the screen.

Hardware and Parts list

Note: Before assembling the screen, make sure all the above components are included.

Assembly Diagram

Assembly Instructions

Frame assembly

1. Take the frames out of the carrying bag, unfold and place them on the protection sheet (L) as shown below.
2. Fasten the frame pieces together at all four locations as shown above using the knob screws (E).

LOCK CENTER JOINTS AND CORNER HINGES

• Center Joints: Unfold the frame until the latch on the hinge “clicks” into place.
  • TIP: Gently lift the frame to ensure the hinge is locked (button pops up).
• Corner Hinges: Unfold the frame’s corner hinges until they “click” into place.

Impact Screen, Left/Right/Top Enclosure Cover Assembly

1. Please follow the instructions below to place the impact screen (F) with the backside facing up before assembly commences.
   • Note: The impact screen has Velcro (soft fuzzy side) on Top edge. This is the backside of the impact screen.
2. Put on the white gloves (M) and attach the Impact screen (F) to the velcro strips on the frame.

1. Left (H) and Right (I) side enclosure cover assembly.

1. Prepare the enclosure covers for attachment to the frame by identifying the front and back.
   • Note: The black side faces in, and the silver side faces out.
2. Aligned velcro the enclosure cover to the inside of the small side frame from bottom to top.
3. Velcro the enclosure cover and impact material together after aligning their edges.

Top enclosure cover (G) assembly

Attach Impact Screen and Top/Right/Left enclosure panels

1. Lift the frame gently with the help of two people.
   • CAUTION: Make sure all leg hinges are locked before lifting the assembled frame to standing position.
2. Attach the Left/Right enclosure cover (H / I) to secure on the bottom of the frame legs.
3. Install Ball Bungees (J) and attach the Impact screen (F) to the enclosure covers.

Upper Frame Padding Installation

ATTN: Start the installation on the inner left side of the enclosure as shown in the illustration.

Impact screen surface tension and flatness adjustment

Wrap tie six Velcro strips (K) on each vertical side frame evenly as instructed below to pull the impact screen material to tension it.

Finished!

Disassembly And Repacking

Disassembly and repacking into the carrying bag

Reverse the installation process to disassemble the GolfSim Portable.
Pack the items back into the carrying bas as shown in the layout diagram below refer below.

GolfSim Portable Series

For local Elite Screens contact or Technical Support, please visit: www.elitescreens.com

References

• Cinema Quality Projector Screens | Elite Screens

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>