ELITE SCREENS IHOME106HW2-E18 Evanesce Datasheet
- May 15, 2024
- ELITE SCREENS
Table of Contents
CERTIFICATE
OF COMPLIANCE
Elite Screens inc.
Evanesce
20653-420
Certificate Number
27 Jan 2012 – 27 Jan 2024
Certificate Period
Certified
Status
UL 2818 – 2013 Gold Standard for Chemical Emissions for Building Materials, Finishes and Furnishings
Interior finishes and furnishings are determined compliant in accordance with California Department of Public Health (CDPH) Standard Method V1.2-2017 using an Office and Classroom Environment.
Product tested in accordance with UL 2821 test method to show compliance to emission limits on UL 2818. Section 7.1 and 7.2.
GREENGUARD Gold Certification Criteria for Furniture and Mattresses
Criteria
| CAS Number| Maximum Allowable Predicted Concentration|
Units
---|---|---|---
TVOC(A)|
–
| 0.22|
mg/m³
Formaldehyde|
50-00-0
| 9 (7.3 ppb)|
µg/m³
Total Aldehydes(B)|
–
| 0.043|
ppm
4-Phenylcyclohexene|
4994-16-5
| 6.5|
µg/m³
1-Methyl-2-pyrrolidinone(C)|
872-50-4
| 160|
µg/m³
Individual VOCs(D)|
–
| 1/2 CREL or 1/100th TLV|
–
(A) Defined to be the total response of measured VOCs falling within the C6 C16 range, with responses calibrated to a toluene surrogate.
(B) The sum of all measured normal aldehydes from formaldehyde through nonanal, plus benzaldehyde, individually calibrated to a compound specific standard. Heptanal through nonanal are measured via TD/GC/MS analysis and the remaining aldehydes are measured using HPLC/UV analysis.
(C) Based on the CA Prop 65 Maximum Allowable Dose Level for inhalation of 3,200 g/day and an inhalation rate of 20 m³/day.
(D) Allowable levels for chemicals not listed are derived from the lower of 1/2 the California Office of Environmental Health Hazard Assessment (OEHHA) Chronic Reference Exposure Level (CREL) as required per the CDPH/EHLB/Standard Method v1.2 and BIFMA level credit 7.6.2 and 1/100th of the Threshold Limit Value (TLV) industrial work place standard (Reference: American Conference of Government Industrial Hygienists, 6500 Glenway, Building D-7, and Cincinnati, OH 45211-4438).
UL investigated representative samples of the identified Product(s) to the identified Standard(s) or other requirements in accordance with the agreements and any applicable program service terms in place between UL and the Certificate Holder (collectively “Agreement”). The Certificate Holder is authorized to use the UL Mark for the identified Product(s) manufactured at the production site(s) covered by the UL Test Report, in accordance with the terms of the Agreement. This Certificate is valid for the identified dates unless there is non-compliance with the Agreement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>