ELITE SCREENS OMS150H-ELECTRIC Yard Master Electric Series Screen Instructions
- May 15, 2024
- ELITE SCREENS
Table of Contents
ELITE SCREENS OMS150H-ELECTRIC Yard Master Electric Series Screen
Specifications:
- Product Name: Yard Master Electric / Yard Master Electric Tab-Tension Series Outdoor Electric Movie Projector Screen
- Installation: Wall and patio installations
- Material: Sleek aluminum casing
- Usage: Outdoor spaces like backyard, patio, pool deck
Product Description:
The Yard Master Electric is an outdoor projector screen designed for wall and
patio installations. It enhances your outdoor spaces with media room quality.
The sleek aluminum casing adds an elegant touch to your backyard, patio, pool
deck, or any area suitable for evening movie gatherings.
Care & Use Instructions:
To maintain optimal picture quality and prolong the product life, follow these
care instructions:
- Avoid touching the projection surface with hands.
- Avoid writing or drawing on the projection surface.
- Avoid using fingers or sharp objects to point at the projection surface.
- Clean the projection surface with a soft-damp cloth using clean water; avoid chemical cleaning agents or alcohol.
- Gently clean the surface without rubbing against the material.
Note: The screen should only be operated by adults to prevent damage and injury.
Precautions & Safety Information:
It is essential to follow these safety precautions for proper usage and to
avoid warranty voiding:
- Avoid any modifications to the product as they can void the warranty.
- Handle the screen carefully during unpacking and keep it on a clean, level surface.
- Protect the screen from exposure to stains and foreign particles.
Ingress Protection Rating IP33:
The Ingress Protection Rating IP33 ensures protection against solid objects
greater than 2.5mm and sprays up to 60 degrees from vertical.
FAQ (Frequently Asked Questions):
-
Q: Can the Yard Master Electric projection screen be used indoors?
A: The Yard Master Electric screen is primarily designed for outdoor use but can be used indoors if suitable for the space. -
Q: How do I adjust the screen’s drop distance?
A: The top black drop is pre-set to its maximum distance and cannot be adjusted. Any modifications may void the warranty. -
Q: What should I do if there is interference with radio or television reception?
A: Try reorienting or relocating the receiving antenna, increasing separation between devices, or using a different power outlet for the screen.
Thank you for choosing the Yard Master Electric / Yard Master Electric Tab- tension Series projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life
Product Description
The Yard Master Electric is an outdoor projector screen for wall and patio installations that brings media room quality to your outdoor spaces. Its sleek aluminum casing beautifully accessorizes your backyard, patio, pool deck or anywhere a gathering for evening movie time is appropriate.
Outdoor Projection Screen Disclaimer
Never leave your projection screen out and exposed to direct sunlight.
Regardless of screen brand, prolonged exposure to the sun’s ultraviolet
radiation degrades the chemical bonds causing the material to eventually
decompose. Photodegradation first causes the material to lose its theater-
grade reflective qualities. Eventually nature will destroy even synthetic
materials. For this reason, the Yard Master Electric has a retractable design
that allows the material to be drawn up into its protective casing to be
shielded from solar radiation.
Care & Use Instructions
Dust, dirt and scratches on the projection surface will affect the picture
quality, please take note of the points below to prevent that from occurring:
- Do not touch the projection surface with your hands
- Do not write or draw on the projection surface
- Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.
- Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
- Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.
To avoid damage and injury, the screen should only be operated by adults.
Understanding the Ingress Protection Rating IP33
Important Safety & Warning Precautions
Make sure to read this user’s guide and follow the procedures below.
- Please retain this user’s guide for future reference.
- To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the supplier.
- Handle the unit carefully during transportation to avoid any damages.
- To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.
- The power outlet supplying power to the unit should be close to the unit and easily accessible.
- Do not install the unit on uneven or inclined surfaces.
- Do not put heavy objects on the power cord and position it properly to avoid creating a trip obstacle.
- Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short circuit.
- There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself. No one except authorized technicians can open and make repairs to this unit.
- Make sure the power source this unit is connected to has a continuous power flow.
- If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid overheat.
- Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances.
- Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.
- Avoid direct Sunshine, rain shower and moisture.
- Keep away from fire sources and high temperature to prevent this device from overheating.
- Cut off the power supply first before transportation or maintenance.
- Fully disconnect from the power supply when the unit is not in use for a long period of time, as should be done with any other electric household appliance.
- To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious damage or if there are any evident broken parts.
WARNING
The Screen’s Top Black Drop is already set to its maximum drop distance. There
is NO extra top black drop in the roller. Please be aware of this as it will
void the limitation of your warranty.
Individual modifications to this product are prohibited and will void the
warranty with the supplier. Please contact Customer Service for any questions.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur on a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna of the device which may be causing the interference.
- Increase the separation between the screen and the device’s receiver.
- Connect the equipment into a different power outlet other than the device.
Pre-Installation
- Carefully unpack the screen.
- Always handle the screen in a leveled position on a clean surface.
- In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles such as dust, sawdust, and/or liquids.
NOTE Wall screws included with this product are complimentary and may not
be adequate for all mounting surfaces. Consult with a professional installer
or hardware store for proper mounting screws and anchors.
Regardless of the mounting method, the screen should be securely supported so
that the vibration or pulling on the viewing surface will not cause the casing
to become loose or fall. The installer must ensure that the fasteners used are
of adequate strength and suitable for the installation location.
Hardware Parts List for Yard Master Electric Series
Installation Instructions
For installation assistance, please consult a professional Installer. Elite Screens’ is not liable for faulty installations.
A. Wall Mount
Flush hidden mount (movable position)
This mount method allows the screen to slide horizontally.
- Determine where the screen will be installed. Then, measure and mark the distance between the top and bottom screw holes from each Wall/Ceiling mount bracket (A).
- Drill a hole on all marked areas and install the brackets with the dry-wall anchor&M5x60 screw (B), Make sure both brackets are properly leveled.
- Hang the screen by placing the downward “catch” located on the back over the brackets upper “catch”.
- After making sure the screen is secured, you can slide it left / right to properly center it in position.
- Lastly, screw the M5x25mm screw (H) into the upper hole of the bracket to add additional support for the screen.
B. Ceiling Mount
Ceiling Mount (movable position)
This mount method allows the screen to slide horizontally.
Two or more people are required while one holds the screen in place.
- Determine where the screen will be installed. Then, measure and mark the distance between the top and bottom screw holes from each Wall/Ceiling mount bracket (A).
- Drill a hole on all marked areas and install the brackets with the dry-wall anchor&M5x60 screw (B), Make sure both brackets are properly leveled.
- Hang the screen by placing the downward “catch” located on the back over the brackets upper “catch”.
- After making sure the screen is secured, you can slide it left / right to properly center it in position.
- Lastly, screw the M5x25mm screw (H) into the upper hole of the bracket to add additional support for the screen.
Suspended
- Screw the eyebolt (I) on the bracket connector (D).
- Attach the snap link (J) through the eyebolt (I) and connect it to an eyebolt screw (not included) rated for the screen’s weight.
Control System and Operation
Screen operation
Electric Current: 110 voltage.
- After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power outlet.
- Once the screen has power, you’ll be able to control it using any of the 2 methods described below.
2 ways to control your Yard Master Electric Screen
-
RF Remote Control (Item A): The radio waves eliminate the need for a direct line of sight with a range of 100 feet.
Radio Frequency (RF) Remote Synchronization Instructions -
Make sure the screen’s power cable is not plugged into a power outlet (If so, then unplug it).
-
Press and HOLD the UP button on the RF remote until you see the flashing light turn solid. (See diagram above)
-
While holding the UP button, plug the screen’s power cable into the power outlet. The screen will drop slightly (you may hear a beep) indicating it has entered pairing mode.
-
Release the UP button for 3 seconds, then press UP button again until you see the flashing light turn solid (the screen will go up and down slightly).
-
You should now be able to control your electric screen with the RF remote control.
-
If unsuccessful repeat from Step 1.
Note: The beep(s) the screen produces are very faint. It may be difficult to hear, if more than 5 feet away from the screen. -
Wireless trigger (Item B): The wireless trigger allows your screen to synchronize its drop/ rise operation with the projector’s power cycle.
Wireless Trigger Set Up Instructions -
A. Wireless trigger and Yard Master Electric projection screen set up [CODE] button:
-
Unplug the Power Cable attached to your motorized Elite Screen from the wall.
-
Connect the Projector’s Power Cable to the wireless trigger, then plug the cable into a nearby power outlet.
-
Locate the [CODE] button on the back of the trigger, then, using a small pin, press and hold the [CODE] button.
-
When you see the LED indicator light flashing rapidly, plug the screen’s power cord into a nearby outlet. The screen will go up and down slightly. Release the [CODE] button at this point (you may hear a beep sound from the screen).
-
Within 3 seconds after releasing the [CODE] button, press and hold the [CODE] button again until you see the LED indicator light flashing rapidly (the screen will go up and down slightly), this means the synchronization (pairing) process is successful.
-
If unsuccessful repeat from Step 1.
-
B. Wireless trigger and projector set up [SET] button:
-
Plug the wireless trigger’s IEC cable into the projector’s power receptacle.
-
Power ON the projector. The screen should drop automatically.
-
Locate the [SET] button on the back of the trigger, then (using a small pin) press and hold the [SET] button for about 3 seconds until LED indicator light flashes and you hear a beep sound.
-
Turn off the projector within 10 seconds after the LED indicator light emits a flash and a beep.
-
At this step in the process, the trigger will record the running current of the projector when it is turned off, and then the process is completed.
-
Power ON the projector. The screen should drop automatically.
-
Power OFF the projector. The screen should retract automatically.
-
If unsuccessful repeat from Step 1.
Magnetic bottom bracket Installation
- After the screen is plugged in to a power outlet, press the DOWN button on the RF remote control. Install the magnetic bottom bracket (G) so that the weight bar sleeve cradles inside (see illustration).
- Mark the drill-hole area of where the bracket is to be installed with a Maker or Pencil.
- Raise the screen UP using the RF remote control. Next, drill holes to insert the M8x35 Anchor (C) if installing to a dry wall. Then affix the magnetic bottom bracket (G) on the marked location and secure it with an M4x35 Screw (C).
- Drop the screen DOWN using the RF remote see if the position of the magnetic bottom bracket (G) is correct or not. Reposition the magnetic bottom bracket if needed.
For more information, support or your local Elite Screens contact, please visit www.elitescreens.com
References
- Cinema Quality Projector Screens | Elite Screens
- Outdoor Retractable Projector Screens - Elite Screens
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>