Danfoss IPS8 Intelligent Purger System Instruction Manual
- June 1, 2024
- Danfoss
Table of Contents
Danfoss IPS8 Intelligent Purger System
Product Information
Specifications
- Supply voltage: Standard voltage
- Current: Varies
- Power consumption: Energy-efficient
FAQ
- Q: How do I know if the IPS is functioning correctly?
- A: Monitor the system performance regularly. Any significant drop in efficiency or unusual noises may indicate a malfunction.
- Q: Can the IPS be used in all types of industrial refrigeration systems?
- A: The Danfoss IPS is designed for industrial refrigeration systems and can be used in various setups. Refer to the product manual for compatibility details.
Introduction
Straightforward installation and continuous efficiency and safety
At Danfoss, we are extending our wide portfolio for industrial refrigeration
to include the Intelligent Air Purger System, also known as Danfoss IPS.
With its compact design, easy installation and automatic purging
functionality, the new Danfoss IPS helps improve the operational safety,
efficiency and cost-effectiveness of industrial refrigeration systems.
- 1 connection for simple installation
Advanced air purger solution
Advanced air purger solution for industrial refrigeration
The new Danfoss Intelligent Purger System (IPS) is an automatic, self- contained operating unit that helps remove non-condensable gases in a safe and energy-efficient way. This helps maintain an optimum refrigeration capacity and system efficiency, allowing professionals to achieve maximum system performance.
Zoom in on the Danfoss IPS 8
Technical data
- Supply voltage: 230V AC, 1ph, 50Hz
- Current: 3.7 A
- Power consumption: 1.3 kW
- Ambient temp, operation: -10°C to +43°C (14°F to 109°F)
- Ambient temp, transport: -30°C to 55°C (-22°F to 131°F)
- Enclosure: IP55
- Weight: 90 kg (199 lbs)
- Dimensions (LxWxH): 1051 x 441 x 703 mm (41.4 x 17.4 x 27.7 inches)
- Purger refrigerant: R452A 900gram (1 lbs 15.75 oz)
- System refrigerant: R717 minimum 6 bar (87 psi)
- Max operating pressure: (R717) 40 bar (580 psi)
- Operating temperature: (R717) -40°C to +60°C (-40°F to +140°F)
Benefits of the Danfoss IPS 8
Easy installation and maintenance
- Cost-effective design with few mechanical and electrical connection interfaces
- Minimizes the risk of leakage thanks to the fully brazed internal cooling system
- Plug and play, stand-alone unit eases installation and commissioning – low risk of potential error
- No need for any advanced settings
- Easy to handle with its compact design
- Fast and easy pump down before service
Maximize system performance
- Automatic purging response to non-condensable gases in the refrigeration system
- Constant high pressure differential pressure between refrigerant and purger refrigerant independent of system suction or condensing pressure
- Reduction of plant power consumption
- 8 point purger functionality
Improve operational safety
- Electronic purging helps reduce the risk of refrigerant release to the environment
- Self-contained operating unit functions independently from the main plant
- Easy monitoring of past purging cycles data with operation log
- Self-diagnostics for unit and system operation to shut down in case of malfunction of air purger components
Visit IPS.danfoss.com to discover more about the new Danfoss IPS
Danfoss can accept no responsibility for possible errors in catalogues,
brochures and other printed material. Danfoss reserves the right to alter its
products without notice.
This also applies to products already on order provided that such alterations
can be made without subsequential changes being necessary in specifications
already agreed.
All trademarks in this material are property of the respective companies.
Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights
reserved.
© Copyright Danfoss | Produced by DCS (CC) | 2019.06
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>