ERGOVENT LINEO PRO-1050-75 Instucbaar Lijnrooster Profile Puzzl Installation Guide

Table of Contents

Specifications
- Product Model: LINEO PRO-1050/75 PROFILE-PUZZLE
- Manufacturer Website: www.ergovent.com

Installation
- The LINEO PRO-1050/75 PROFILE-PUZZLE diffuser can be installed using the vertical installation method outlined below:
- Step 1: Prepare the installation area and ensure all necessary tools are available.
- Step 2: Follow steps 1.1 to 1.19 as detailed in the manual for the vertical installation method.
- Step 3: Click into place as indicated in step 2.3.
- Step 4: Complete the installation by following steps 2.4 to 2.9.
Additional Information
- For additional guidance or troubleshooting during the installation process, refer to the manual in the respective language provided.

Q: Can the diffuser be installed horizontally?
- A: The LINEO PRO-1050/75 PROFILE-PUZZLE diffuser is designed for vertical installation only.
Q: Where can I find more information or support?
- A: For further assistance or product inquiries, visit the manufacturer’s website at www.ergovent.com or refer to the manual in your preferred language.

$ERGOVENT-LINEO-PRO-1050-75-Instucbaar-Lijnrooster-Profile-Puzzl-FIG-1 $3$$

Read carefully and follow the finishing recommendations set out in the installation instructions to prevent cracks in the putty joints.
Avoid installing ceiling diffusers above permanent seating areas. Since the airflow is directed directly downwards, you can feel the air current. The recommendation applies only to supply air diffusers.
When carrying out installation work, wear appropriate protective equipment: helmet, goggles, and gloves.
The duct connection fittings are screwed into the connection box, or the covers are fixed by rotating them at an angle of 45 degrees (Fig. 1.10). It is necessary to rotate firmly up to the point of full fixation!
If you have purchased a diffuser with an airflow balancing damper, it is adjustable with two hex keys (Fig. 1.19). When carrying out finishing works, we recommend following Knauf finishing technology.
Brime the races with mes cut from haus tater and gaps. primer.
We recommend using Knauf’s “Fugenfuler” or “Uniflott” putty to fill gaps.
To prevent cracks in the joint, we recommend reinforcing the entire diffuser surface with thin glass fabric (Fig. 1.16).
Before painting, prime surfaces covered with putty by using a deep primer, and in humid premises, use a moisture-resistant primer.
In humid premises, use a moisture-resistant ceiling paint specifically designed for such premises. $ERGOVENT-LINEO-PRO-1050-75-Instucbaar-Lijnrooster-Profile-Puzzl-FIG-1 $1$$