ERGOVENT 1000-75 SINGLE Slotted Diffuser Instruction Manual
- June 1, 2024
- ERGOVENT
Table of Contents
ERGOVENT 1000-75 SINGLE Slotted Diffuser
Product Information
- Model: LINEO PRO-1000/75 SINGLE
- Installation Language Options: English, Dutch, Italian, French, Polish, Danish, Lithuanian, Estonian, Ukrainian, Romanian, Norwegian, Finnish, Latvian, Slovenian, German, Greek, Russian
- Maximum Installation Depth: 25 mm
- Rubber Gasket Included
- Recommended Distance for Finishing: 10-20 cm
- Airflow Balance Requirement: minimum 8.5 cm
- Manufacturer Website: www.ergovent.com.
Product Usage Instructions
Installation
- Prepare the installation site and ensure a maximum depth of 25 mm is available.
- Place the rubber gasket in the designated area for proper sealing.
- Follow the specific language installation guide corresponding to your product.
- Position the diffuser at a distance of 10-20 cm from the finishing surface.
- Ensure proper airflow balance by maintaining a minimum distance of 8.5 cm for optimal performance.
Finishing Instructions
- Complete the installation by following the finishing guidelines provided.
- Refer to steps 2.1 to 2.8 in the manual for detailed finishing instructions.
For Further Assistance
If you encounter any issues during installation or usage, please refer to the
manufacturer’s website or contact their customer support for additional help.
FAQ
-
Q: What should I do if the rubber gasket is missing from the package?
A: In case the rubber gasket is missing, please contact customer support for a replacement before proceeding with the installation. Using the gasket is crucial for ensuring proper sealing. -
Q: Can the installation depth be adjusted if my wall thickness exceeds 25 mm?
A: It is recommended to adhere to the maximum installation depth of 25 mm for optimal performance. Modifying this depth may affect the functionality of the diffuser.
INSTALLATION INSTRUCTION
Read carefully and follow the finishing recommendations set out in the installation instructions to prevent cracks in the putty joints.
- Avoid installing ceiling diffusers above permanent seating areas. Since the airflow is directed directly downwards, you can feel the air current. The recommendation applies only to supply air diffusers.
- When carrying out installation work, wear appropriate protective equipment: helmet, goggles and gloves.
- The duct connection fittings are screwed into the connection box, or the covers are fixed by rotating them at an angle of 45 degrees (Fig. 1.5). It is necessary to rotate firmly up to the point of full fixation!
- If you have purchased a diffuser with an airflow balancing damper, it is adjustable with two hex keys (Fig. 2.8).
- When carrying out finishing works, we recommend following Knauf finishing technology.
- Before applying putty, remove dust from the surfaces and gaps. Prime the surfaces with Ceresit CT-17 or Knauf “Tiefgrund” primer.
- We recommend using Knauf’s “Fugenfuler” or “Uniflott” putty to fill gaps.
- To prevent cracks in the joint, we recommend reinforcing the entire diffuser surface with thin glass fabric (Fig. 2.2).
- Before painting, prime surfaces covered with putty by using a deep primer, and in humid premises, use a moisture-resistant primer.
- In humid premises, use a moisture-resistant ceiling paint specifically designed for such premises.
FINISHING INSTRUCTIONS
